From: Judith Mendez <jm@ti.com>
To: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
Tero Kristo <kristo@kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Wadim Egorov <w.egorov@phytec.de>,
Francesco Dolcini <francesco.dolcini@toradex.com>
Subject: [PATCH v3 0/9] Fix MMC properties on Sitara K3 devices
Date: Tue, 13 Feb 2024 17:56:52 -0600 [thread overview]
Message-ID: <20240213235701.2438513-1-jm@ti.com> (raw)
This patch series aims to fix and update MMC nodes for TI
Sitara K3 devices with the following changes.
The series introduces sdhci0 and sdhci2 nodes and enables
eMMC for AM62ax platform.
Also introduce fixes for MMC ITAP/OTAP values for AM64x
platform according to device datasheet [0], and add ITAP/
OTAP values for AM62p to enable the highest timing possible
for MMC0 and MMC1, according to device datasheet [1].
The DLL properties ti,trm-icp and ti,driver-strength-ohm
should be removed for soft PHYs since drive strength cannot
be changed, so remove these properties when not applicable.
Since this fix touches non-TI boards and therefore cannot be
tested, all tested-by's are welcome.
Also include a few fixes for ti,clkbuf-sel, bus-width,
and bootph-all device tree properties in MMC nodes.
This series was tested on:
- AM62a SK
- AM62x SK
- AM62p SK
- AM64x GP EVM
- AM64x SK EVM
- Beagleplay
[0] https://www.ti.com/lit/ds/symlink/am6442.pdf
[1] https://www.ti.com/lit/ds/symlink/am62p.pdf
Fixes since V2:
- Remove ti,driver-strength-ohm property in sdhci1 node for
k3-am642-tqma64xxl-mbax4xxl and k3-am642-phyboard-electra-rdk board files.
- Add Francesco's Acked-by
V2: https://lore.kernel.org/linux-devicetree/20240213002416.1560357-1-jm@ti.com/
V1: https://lore.kernel.org/linux-devicetree/22af7436-8833-4049-bdbb-f79bb3314ee8@ti.com/
RFC: https://lore.kernel.org/linux-devicetree/c94b7399-31c0-4e7d-a616-8f29c86a27ba@ti.com/
Judith Mendez (7):
arm64: dts: ti: k3-am62a-main: Add sdhci2 instance
arm64: dts: ti: k3-am64-main: Fix ITAP/OTAP values for MMC
arm64: dts: ti: k3-am62p: Add ITAP/OTAP values for MMC
arm64: dts: ti: k3-am6*: Remove DLL properties for soft PHYs
arm64: dts: ti: k3-am6*: Fix ti,clkbuf-sel property in MMC nodes
arm64: dts: ti: k3-am6*: Fix bus-width property in MMC nodes
arm64: dts: ti: k3-am6*: Add bootph-all property in MMC node
Nitin Yadav (2):
arm64: dts: ti: k3-am62a-main: Add sdhci0 instance
arm64: dts: ti: k3-am62a7-sk: Enable eMMC support
arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 12 +++--
.../boot/dts/ti/k3-am62-phycore-som.dtsi | 1 -
.../boot/dts/ti/k3-am62-verdin-dahlia.dtsi | 1 -
.../arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi | 1 -
.../boot/dts/ti/k3-am62-verdin-wifi.dtsi | 1 -
arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi | 2 -
.../arm64/boot/dts/ti/k3-am625-beagleplay.dts | 4 --
.../dts/ti/k3-am625-phyboard-lyra-rdk.dts | 1 -
arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 45 ++++++++++++++++++-
arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 27 ++++++++++-
arch/arm64/boot/dts/ti/k3-am62p-main.dtsi | 44 ++++++++++++++++--
arch/arm64/boot/dts/ti/k3-am62p5-sk.dts | 3 +-
.../arm64/boot/dts/ti/k3-am62x-sk-common.dtsi | 2 -
arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 15 +++++--
arch/arm64/boot/dts/ti/k3-am642-evm.dts | 4 +-
.../dts/ti/k3-am642-phyboard-electra-rdk.dts | 1 -
arch/arm64/boot/dts/ti/k3-am642-sk.dts | 2 -
.../dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts | 1 -
18 files changed, 129 insertions(+), 38 deletions(-)
base-commit: 1e6bbc5185bcd113c8d2f7aa0a02f588a6bdbe5d
--
2.43.0
next reply other threads:[~2024-02-13 23:57 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-13 23:56 Judith Mendez [this message]
2024-02-13 23:56 ` [PATCH v3 1/9] arm64: dts: ti: k3-am62a-main: Add sdhci0 instance Judith Mendez
2024-02-13 23:56 ` [PATCH v3 2/9] arm64: dts: ti: k3-am62a-main: Add sdhci2 instance Judith Mendez
2024-02-13 23:56 ` [PATCH v3 3/9] arm64: dts: ti: k3-am62a7-sk: Enable eMMC support Judith Mendez
2024-02-13 23:56 ` [PATCH v3 4/9] arm64: dts: ti: k3-am64-main: Fix ITAP/OTAP values for MMC Judith Mendez
2024-02-13 23:56 ` [PATCH v3 5/9] arm64: dts: ti: k3-am62p: Add " Judith Mendez
2024-02-13 23:56 ` [PATCH v3 6/9] arm64: dts: ti: k3-am6*: Remove DLL properties for soft PHYs Judith Mendez
2024-02-13 23:56 ` [PATCH v3 7/9] arm64: dts: ti: k3-am6*: Fix ti,clkbuf-sel property in MMC nodes Judith Mendez
2024-02-13 23:57 ` [PATCH v3 8/9] arm64: dts: ti: k3-am6*: Fix bus-width " Judith Mendez
2024-02-13 23:57 ` [PATCH v3 9/9] arm64: dts: ti: k3-am6*: Add bootph-all property in MMC node Judith Mendez
2024-02-14 10:26 ` [PATCH v3 0/9] Fix MMC properties on Sitara K3 devices Wadim Egorov
2024-02-20 4:03 ` Vignesh Raghavendra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240213235701.2438513-1-jm@ti.com \
--to=jm@ti.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=francesco.dolcini@toradex.com \
--cc=kristo@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=vigneshr@ti.com \
--cc=w.egorov@phytec.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).