From: Judith Mendez <jm@ti.com>
To: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
Tero Kristo <kristo@kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Wadim Egorov <w.egorov@phytec.de>,
Francesco Dolcini <francesco.dolcini@toradex.com>
Subject: [PATCH v3 6/9] arm64: dts: ti: k3-am6*: Remove DLL properties for soft PHYs
Date: Tue, 13 Feb 2024 17:56:58 -0600 [thread overview]
Message-ID: <20240213235701.2438513-7-jm@ti.com> (raw)
In-Reply-To: <20240213235701.2438513-1-jm@ti.com>
Remove DLL properties which are not applicable for soft PHYs
since these PHYs do not have a DLL to enable.
Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Verdin AM62
Signed-off-by: Judith Mendez <jm@ti.com>
---
Changes since V3:
- Remove ti,driver-strength-ohm property in sdhci1 node for
k3-am642-tqma64xxl-mbax4xxl and k3-am642-phyboard-electra-rdk board files.
- Add Francesco's Acked-by
---
arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 3 ---
arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi | 1 -
arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi | 1 -
arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi | 1 -
arch/arm64/boot/dts/ti/k3-am62-verdin-wifi.dtsi | 1 -
arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi | 2 --
arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts | 3 ---
arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts | 1 -
arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 1 -
arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 1 -
arch/arm64/boot/dts/ti/k3-am62p5-sk.dts | 1 -
arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi | 2 --
arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 1 -
arch/arm64/boot/dts/ti/k3-am642-evm.dts | 1 -
arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts | 1 -
arch/arm64/boot/dts/ti/k3-am642-sk.dts | 1 -
arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts | 1 -
17 files changed, 23 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
index fe0cc4a9a501..79ed5cbbbda1 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -561,7 +561,6 @@ sdhci0: mmc@fa10000 {
assigned-clock-parents = <&k3_clks 57 8>;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
- ti,trm-icp = <0x2>;
bus-width = <8>;
ti,clkbuf-sel = <0x7>;
ti,otap-del-sel-legacy = <0x0>;
@@ -580,7 +579,6 @@ sdhci1: mmc@fa00000 {
power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 58 5>, <&k3_clks 58 6>;
clock-names = "clk_ahb", "clk_xin";
- ti,trm-icp = <0x2>;
ti,otap-del-sel-legacy = <0x8>;
ti,otap-del-sel-sd-hs = <0x0>;
ti,otap-del-sel-sdr12 = <0x0>;
@@ -604,7 +602,6 @@ sdhci2: mmc@fa20000 {
power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 184 5>, <&k3_clks 184 6>;
clock-names = "clk_ahb", "clk_xin";
- ti,trm-icp = <0x2>;
ti,otap-del-sel-legacy = <0x8>;
ti,otap-del-sel-sd-hs = <0x0>;
ti,otap-del-sel-sdr12 = <0x0>;
diff --git a/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
index 3372a256c90f..43488cc8bcb1 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
@@ -317,7 +317,6 @@ serial_flash: flash@0 {
&sdhci0 {
pinctrl-names = "default";
pinctrl-0 = <&main_mmc0_pins_default>;
- ti,driver-strength-ohm = <50>;
disable-wp;
non-removable;
status = "okay";
diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi
index bf6d27e70bc4..6c4cec8728e4 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi
@@ -185,7 +185,6 @@ &ospi0 {
/* Verdin SD_1 */
&sdhci1 {
- ti,driver-strength-ohm = <33>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi
index 680071688dcb..be62648e7818 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi
@@ -206,7 +206,6 @@ &ospi0 {
/* Verdin SD_1 */
&sdhci1 {
- ti,driver-strength-ohm = <33>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-wifi.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-wifi.dtsi
index a6808b10c7b2..4768ef42c4fc 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-verdin-wifi.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-wifi.dtsi
@@ -26,7 +26,6 @@ &sdhci2 {
mmc-pwrseq = <&wifi_pwrseq>;
non-removable;
ti,fails-without-test-cd;
- ti,driver-strength-ohm = <50>;
vmmc-supply = <®_3v3>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi
index 6a06724b6d16..d68310444bcb 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi
@@ -1407,7 +1407,6 @@ &sdhci0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sdhci0>;
non-removable;
- ti,driver-strength-ohm = <50>;
status = "okay";
};
@@ -1416,7 +1415,6 @@ &sdhci1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sdhci1>;
disable-wp;
- ti,driver-strength-ohm = <50>;
vmmc-supply = <®_sdhc1_vmmc>;
vqmmc-supply = <®_sdhc1_vqmmc>;
status = "disabled";
diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
index 3b4246ce49de..bb6a5837bcb3 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
@@ -819,7 +819,6 @@ &sdhci0 {
bootph-all;
pinctrl-names = "default";
pinctrl-0 = <&emmc_pins_default>;
- ti,driver-strength-ohm = <50>;
disable-wp;
status = "okay";
};
@@ -832,7 +831,6 @@ &sdhci1 {
vmmc-supply = <&vdd_3v3_sd>;
vqmmc-supply = <&vdd_sd_dv>;
- ti,driver-strength-ohm = <50>;
disable-wp;
cd-gpios = <&main_gpio1 48 GPIO_ACTIVE_LOW>;
cd-debounce-delay-ms = <100>;
@@ -849,7 +847,6 @@ &sdhci2 {
ti,fails-without-test-cd;
cap-power-off-card;
keep-power-in-suspend;
- ti,driver-strength-ohm = <50>;
assigned-clocks = <&k3_clks 157 158>;
assigned-clock-parents = <&k3_clks 157 160>;
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts
index 5c31f0453def..a83a90497857 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts
@@ -334,7 +334,6 @@ &sdhci1 {
vqmmc-supply = <&vddshv5_sdio>;
pinctrl-names = "default";
pinctrl-0 = <&main_mmc1_pins_default>;
- ti,driver-strength-ohm = <50>;
disable-wp;
no-1-8-v;
status = "okay";
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
index 6806288ec227..f283777d54b4 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
@@ -561,7 +561,6 @@ sdhci1: mmc@fa00000 {
power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 58 5>, <&k3_clks 58 6>;
clock-names = "clk_ahb", "clk_xin";
- ti,trm-icp = <0x2>;
ti,otap-del-sel-legacy = <0x0>;
ti,otap-del-sel-sd-hs = <0x0>;
ti,otap-del-sel-sdr12 = <0xf>;
diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
index c99b2e90f76d..f241637a5642 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
@@ -582,7 +582,6 @@ &sdhci1 {
vmmc-supply = <&vdd_mmc1>;
pinctrl-names = "default";
pinctrl-0 = <&main_mmc1_pins_default>;
- ti,driver-strength-ohm = <50>;
disable-wp;
};
diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
index 8c73587b0b62..5c9b73726ebd 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
@@ -422,7 +422,6 @@ &sdhci1 {
vqmmc-supply = <&vddshv_sdio>;
pinctrl-names = "default";
pinctrl-0 = <&main_mmc1_pins_default>;
- ti,driver-strength-ohm = <50>;
disable-wp;
bootph-all;
};
diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
index 6dd496cd459a..3c45782ab2b7 100644
--- a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
@@ -411,7 +411,6 @@ &sdhci0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_mmc0_pins_default>;
- ti,driver-strength-ohm = <50>;
disable-wp;
};
@@ -421,7 +420,6 @@ &sdhci1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_mmc1_pins_default>;
- ti,driver-strength-ohm = <50>;
disable-wp;
};
diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
index 9bfa0a969bfc..a29847735c6e 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
@@ -646,7 +646,6 @@ sdhci1: mmc@fa00000 {
power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 58 3>, <&k3_clks 58 4>;
clock-names = "clk_ahb", "clk_xin";
- ti,trm-icp = <0x2>;
ti,otap-del-sel-legacy = <0x0>;
ti,otap-del-sel-sd-hs = <0x0>;
ti,otap-del-sel-sdr12 = <0xf>;
diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
index 5c546ae76d3e..f308076d608a 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
@@ -508,7 +508,6 @@ &sdhci1 {
pinctrl-names = "default";
bus-width = <4>;
pinctrl-0 = <&main_mmc1_pins_default>;
- ti,driver-strength-ohm = <50>;
disable-wp;
};
diff --git a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
index c0c45b8a0245..8237b8c815b8 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
@@ -292,7 +292,6 @@ &sdhci1 {
pinctrl-names = "default";
pinctrl-0 = <&main_mmc1_pins_default>;
bus-width = <4>;
- ti,driver-strength-ohm = <50>;
disable-wp;
no-1-8-v;
};
diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
index cce04e188ff6..b286eaa02ada 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
@@ -471,7 +471,6 @@ &sdhci1 {
pinctrl-names = "default";
bus-width = <4>;
pinctrl-0 = <&main_mmc1_pins_default>;
- ti,driver-strength-ohm = <50>;
disable-wp;
};
diff --git a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts
index 55102d35cecc..1f4dc5ad1696 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts
@@ -422,7 +422,6 @@ &sdhci1 {
cd-gpios = <&main_gpio1 77 GPIO_ACTIVE_LOW>;
disable-wp;
no-mmc;
- ti,driver-strength-ohm = <50>;
ti,fails-without-test-cd;
/* Enabled by overlay */
};
--
2.43.0
next prev parent reply other threads:[~2024-02-13 23:57 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-13 23:56 [PATCH v3 0/9] Fix MMC properties on Sitara K3 devices Judith Mendez
2024-02-13 23:56 ` [PATCH v3 1/9] arm64: dts: ti: k3-am62a-main: Add sdhci0 instance Judith Mendez
2024-02-13 23:56 ` [PATCH v3 2/9] arm64: dts: ti: k3-am62a-main: Add sdhci2 instance Judith Mendez
2024-02-13 23:56 ` [PATCH v3 3/9] arm64: dts: ti: k3-am62a7-sk: Enable eMMC support Judith Mendez
2024-02-13 23:56 ` [PATCH v3 4/9] arm64: dts: ti: k3-am64-main: Fix ITAP/OTAP values for MMC Judith Mendez
2024-02-13 23:56 ` [PATCH v3 5/9] arm64: dts: ti: k3-am62p: Add " Judith Mendez
2024-02-13 23:56 ` Judith Mendez [this message]
2024-02-13 23:56 ` [PATCH v3 7/9] arm64: dts: ti: k3-am6*: Fix ti,clkbuf-sel property in MMC nodes Judith Mendez
2024-02-13 23:57 ` [PATCH v3 8/9] arm64: dts: ti: k3-am6*: Fix bus-width " Judith Mendez
2024-02-13 23:57 ` [PATCH v3 9/9] arm64: dts: ti: k3-am6*: Add bootph-all property in MMC node Judith Mendez
2024-02-14 10:26 ` [PATCH v3 0/9] Fix MMC properties on Sitara K3 devices Wadim Egorov
2024-02-20 4:03 ` Vignesh Raghavendra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240213235701.2438513-7-jm@ti.com \
--to=jm@ti.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=francesco.dolcini@toradex.com \
--cc=kristo@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=vigneshr@ti.com \
--cc=w.egorov@phytec.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).