From: Judith Mendez <jm@ti.com>
To: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
Tero Kristo <kristo@kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Wadim Egorov <w.egorov@phytec.de>,
Francesco Dolcini <francesco.dolcini@toradex.com>
Subject: [PATCH v3 7/9] arm64: dts: ti: k3-am6*: Fix ti,clkbuf-sel property in MMC nodes
Date: Tue, 13 Feb 2024 17:56:59 -0600 [thread overview]
Message-ID: <20240213235701.2438513-8-jm@ti.com> (raw)
In-Reply-To: <20240213235701.2438513-1-jm@ti.com>
Move ti,clkbuf-sel property above the OTAP/ITAP delay values.
While there is no error with where it is currently at, it is
easier to read the MMC node if ti,clkbuf-sel is located above
the OTAP/ITAP delay values consistently across MMC nodes.
Add missing ti,clkbuf-sel for MMC0 in k3-am64-main.
Signed-off-by: Judith Mendez <jm@ti.com>
---
Changes since V3:
- No change
---
arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 4 ++--
arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 2 +-
arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 3 ++-
3 files changed, 5 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
index 79ed5cbbbda1..410b390ce5d5 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -579,6 +579,7 @@ sdhci1: mmc@fa00000 {
power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 58 5>, <&k3_clks 58 6>;
clock-names = "clk_ahb", "clk_xin";
+ ti,clkbuf-sel = <0x7>;
ti,otap-del-sel-legacy = <0x8>;
ti,otap-del-sel-sd-hs = <0x0>;
ti,otap-del-sel-sdr12 = <0x0>;
@@ -590,7 +591,6 @@ sdhci1: mmc@fa00000 {
ti,itap-del-sel-sd-hs = <0x1>;
ti,itap-del-sel-sdr12 = <0xa>;
ti,itap-del-sel-sdr25 = <0x1>;
- ti,clkbuf-sel = <0x7>;
bus-width = <4>;
status = "disabled";
};
@@ -602,6 +602,7 @@ sdhci2: mmc@fa20000 {
power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 184 5>, <&k3_clks 184 6>;
clock-names = "clk_ahb", "clk_xin";
+ ti,clkbuf-sel = <0x7>;
ti,otap-del-sel-legacy = <0x8>;
ti,otap-del-sel-sd-hs = <0x0>;
ti,otap-del-sel-sdr12 = <0x0>;
@@ -613,7 +614,6 @@ sdhci2: mmc@fa20000 {
ti,itap-del-sel-sd-hs = <0xa>;
ti,itap-del-sel-sdr12 = <0xa>;
ti,itap-del-sel-sdr25 = <0x1>;
- ti,clkbuf-sel = <0x7>;
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
index f283777d54b4..ddb76cd66f88 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
@@ -561,6 +561,7 @@ sdhci1: mmc@fa00000 {
power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 58 5>, <&k3_clks 58 6>;
clock-names = "clk_ahb", "clk_xin";
+ ti,clkbuf-sel = <0x7>;
ti,otap-del-sel-legacy = <0x0>;
ti,otap-del-sel-sd-hs = <0x0>;
ti,otap-del-sel-sdr12 = <0xf>;
@@ -572,7 +573,6 @@ sdhci1: mmc@fa00000 {
ti,itap-del-sel-sd-hs = <0x0>;
ti,itap-del-sel-sdr12 = <0x0>;
ti,itap-del-sel-sdr25 = <0x0>;
- ti,clkbuf-sel = <0x7>;
bus-width = <4>;
no-1-8-v;
status = "disabled";
diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
index a29847735c6e..bea05be7cb48 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
@@ -628,6 +628,7 @@ sdhci0: mmc@fa10000 {
clock-names = "clk_ahb", "clk_xin";
mmc-ddr-1_8v;
mmc-hs200-1_8v;
+ ti,clkbuf-sel = <0x7>;
ti,trm-icp = <0x2>;
ti,otap-del-sel-legacy = <0x0>;
ti,otap-del-sel-mmc-hs = <0x0>;
@@ -646,6 +647,7 @@ sdhci1: mmc@fa00000 {
power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 58 3>, <&k3_clks 58 4>;
clock-names = "clk_ahb", "clk_xin";
+ ti,clkbuf-sel = <0x7>;
ti,otap-del-sel-legacy = <0x0>;
ti,otap-del-sel-sd-hs = <0x0>;
ti,otap-del-sel-sdr12 = <0xf>;
@@ -657,7 +659,6 @@ sdhci1: mmc@fa00000 {
ti,itap-del-sel-sd-hs = <0x0>;
ti,itap-del-sel-sdr12 = <0x0>;
ti,itap-del-sel-sdr25 = <0x0>;
- ti,clkbuf-sel = <0x7>;
status = "disabled";
};
--
2.43.0
next prev parent reply other threads:[~2024-02-13 23:57 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-13 23:56 [PATCH v3 0/9] Fix MMC properties on Sitara K3 devices Judith Mendez
2024-02-13 23:56 ` [PATCH v3 1/9] arm64: dts: ti: k3-am62a-main: Add sdhci0 instance Judith Mendez
2024-02-13 23:56 ` [PATCH v3 2/9] arm64: dts: ti: k3-am62a-main: Add sdhci2 instance Judith Mendez
2024-02-13 23:56 ` [PATCH v3 3/9] arm64: dts: ti: k3-am62a7-sk: Enable eMMC support Judith Mendez
2024-02-13 23:56 ` [PATCH v3 4/9] arm64: dts: ti: k3-am64-main: Fix ITAP/OTAP values for MMC Judith Mendez
2024-02-13 23:56 ` [PATCH v3 5/9] arm64: dts: ti: k3-am62p: Add " Judith Mendez
2024-02-13 23:56 ` [PATCH v3 6/9] arm64: dts: ti: k3-am6*: Remove DLL properties for soft PHYs Judith Mendez
2024-02-13 23:56 ` Judith Mendez [this message]
2024-02-13 23:57 ` [PATCH v3 8/9] arm64: dts: ti: k3-am6*: Fix bus-width property in MMC nodes Judith Mendez
2024-02-13 23:57 ` [PATCH v3 9/9] arm64: dts: ti: k3-am6*: Add bootph-all property in MMC node Judith Mendez
2024-02-14 10:26 ` [PATCH v3 0/9] Fix MMC properties on Sitara K3 devices Wadim Egorov
2024-02-20 4:03 ` Vignesh Raghavendra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240213235701.2438513-8-jm@ti.com \
--to=jm@ti.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=francesco.dolcini@toradex.com \
--cc=kristo@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=vigneshr@ti.com \
--cc=w.egorov@phytec.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).