devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Eddie James <eajames@linux.ibm.com>
To: linux-fsi@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org, linux-i2c@vger.kernel.org,
	linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
	andi.shyti@kernel.org, eajames@linux.ibm.com,
	alistair@popple.id.au, joel@jms.id.au, jk@ozlabs.org,
	sboyd@kernel.org, mturquette@baylibre.com, robh@kernel.org,
	krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org
Subject: [PATCH 12/33] fsi: core: Allow cfam device type aliases
Date: Thu, 15 Feb 2024 16:07:38 -0600	[thread overview]
Message-ID: <20240215220759.976998-13-eajames@linux.ibm.com> (raw)
In-Reply-To: <20240215220759.976998-1-eajames@linux.ibm.com>

Other FSI devices can uses aliases for the device numbering, so
modify the function to get a new minor to allow the cfam type
to use aliases too.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
 drivers/fsi/fsi-core.c | 59 +++++++++++++++++++++---------------------
 1 file changed, 29 insertions(+), 30 deletions(-)

diff --git a/drivers/fsi/fsi-core.c b/drivers/fsi/fsi-core.c
index eb15e5f5a2ee..95f6ce81f8f4 100644
--- a/drivers/fsi/fsi-core.c
+++ b/drivers/fsi/fsi-core.c
@@ -884,12 +884,37 @@ static int fsi_adjust_index(int index)
 #endif
 }
 
-static int __fsi_get_new_minor(struct fsi_slave *slave, enum fsi_dev_type type,
-			       dev_t *out_dev, int *out_index)
+static const char *const fsi_dev_type_names[] = {
+	"cfam",
+	"sbefifo",
+	"scom",
+	"occ",
+};
+
+static int __fsi_get_new_minor(struct fsi_slave *slave, struct device_node *np,
+			       enum fsi_dev_type type, dev_t *out_dev, int *out_index)
 {
 	int cid = slave->chip_id;
 	int id;
 
+	if (np) {
+		int aid = of_alias_get_id(np, fsi_dev_type_names[type]);
+
+		if (aid >= 0) {
+			/* Use the same scheme as the legacy numbers. */
+			id = (aid << 2) | type;
+			id = ida_alloc_range(&fsi_minor_ida, id, id, GFP_KERNEL);
+			if (id >= 0) {
+				*out_index = aid;
+				*out_dev = fsi_base_dev + id;
+				return 0;
+			}
+
+			if (id != -ENOSPC)
+				return id;
+		}
+	}
+
 	/* Check if we qualify for legacy numbering */
 	if (cid >= 0 && cid < 16 && type < 4) {
 		/*
@@ -918,36 +943,10 @@ static int __fsi_get_new_minor(struct fsi_slave *slave, enum fsi_dev_type type,
 	return 0;
 }
 
-static const char *const fsi_dev_type_names[] = {
-	"cfam",
-	"sbefifo",
-	"scom",
-	"occ",
-};
-
 int fsi_get_new_minor(struct fsi_device *fdev, enum fsi_dev_type type,
 		      dev_t *out_dev, int *out_index)
 {
-	if (fdev->dev.of_node) {
-		int aid = of_alias_get_id(fdev->dev.of_node, fsi_dev_type_names[type]);
-
-		if (aid >= 0) {
-			/* Use the same scheme as the legacy numbers. */
-			int id = (aid << 2) | type;
-
-			id = ida_alloc_range(&fsi_minor_ida, id, id, GFP_KERNEL);
-			if (id >= 0) {
-				*out_index = aid;
-				*out_dev = fsi_base_dev + id;
-				return 0;
-			}
-
-			if (id != -ENOSPC)
-				return id;
-		}
-	}
-
-	return __fsi_get_new_minor(fdev->slave, type, out_dev, out_index);
+	return __fsi_get_new_minor(fdev->slave, fdev->dev.of_node, type, out_dev, out_index);
 }
 EXPORT_SYMBOL_GPL(fsi_get_new_minor);
 
@@ -1052,7 +1051,7 @@ static int fsi_slave_init(struct fsi_master *master, int link, uint8_t id)
 	}
 
 	/* Allocate a minor in the FSI space */
-	rc = __fsi_get_new_minor(slave, fsi_dev_cfam, &slave->dev.devt,
+	rc = __fsi_get_new_minor(slave, slave->dev.of_node, fsi_dev_cfam, &slave->dev.devt,
 				 &slave->cdev_idx);
 	if (rc)
 		goto err_free;
-- 
2.39.3


  parent reply	other threads:[~2024-02-15 22:08 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-15 22:07 [PATCH 00/33] fsi: Interrupt support Eddie James
2024-02-15 22:07 ` [PATCH 01/33] dt-bindings: clock: ast2600: Add FSI clock Eddie James
2024-02-16  8:07   ` Krzysztof Kozlowski
2024-02-22  5:45   ` Stephen Boyd
2024-02-15 22:07 ` [PATCH 02/33] clk: ast2600: Add FSI parent clock with correct rate Eddie James
2024-02-22  5:46   ` Stephen Boyd
2024-02-15 22:07 ` [PATCH 03/33] fsi: Move slave definitions to fsi-slave.h Eddie James
2024-02-15 22:07 ` [PATCH 04/33] fsi: Improve master indexing Eddie James
2024-02-15 22:07 ` [PATCH 05/33] fsi: Use a defined value for default echo delay Eddie James
2024-02-15 22:07 ` [PATCH 06/33] fsi: Expose master-specific local bus clock divider Eddie James
2024-02-15 22:07 ` [PATCH 07/33] ARM: dts: aspeed: p10 and tacoma: Set FSI clock frequency Eddie James
2024-02-16  8:08   ` Krzysztof Kozlowski
2024-02-16 19:14     ` Eddie James
2024-02-22 12:33       ` Joel Stanley
2024-02-15 22:07 ` [PATCH 08/33] fsi: core: Improve master read/write/error traces Eddie James
2024-02-15 22:07 ` [PATCH 09/33] fsi: core: Add slave error trace Eddie James
2024-02-15 22:07 ` [PATCH 10/33] fsi: aspeed: Add AST2700 support Eddie James
2024-02-16  8:09   ` Krzysztof Kozlowski
2024-02-16 19:18     ` Eddie James
2024-02-15 22:07 ` [PATCH 11/33] fsi: core: Add slave spinlock Eddie James
2024-02-15 22:07 ` Eddie James [this message]
2024-02-20  8:31   ` [PATCH 12/33] fsi: core: Allow cfam device type aliases Dan Carpenter
2024-02-15 22:07 ` [PATCH 13/33] fsi: core: Add common regmap master functions Eddie James
2024-02-15 22:07 ` [PATCH 14/33] fsi: hub: Use common initialization and link enable Eddie James
2024-02-15 22:07 ` [PATCH 15/33] fsi: aspeed: " Eddie James
2024-02-15 22:07 ` [PATCH 16/33] fsi: aspeed: Remove cfam reset sysfs file in error path and remove Eddie James
2024-02-15 22:07 ` [PATCH 17/33] fsi: aspeed: Refactor trace functions Eddie James
2024-02-15 22:07 ` [PATCH 18/33] fsi: aspeed: Don't clear all IRQs during OPB transfers Eddie James
2024-02-15 22:07 ` [PATCH 19/33] fsi: aspeed: Only read result register for successful read Eddie James
2024-02-15 22:07 ` [PATCH 20/33] fsi: aspeed: Switch to spinlock Eddie James
2024-02-15 22:07 ` [PATCH 21/33] fsi: aspeed: Disable relative addressing and IPOLL for cfam reset Eddie James
2024-02-15 22:07 ` [PATCH 22/33] fsi: aspeed: Use common master error handler Eddie James
2024-02-15 22:07 ` [PATCH 23/33] fsi: core: Add interrupt support Eddie James
2024-02-15 22:07 ` [PATCH 24/33] fsi: aspeed: " Eddie James
2024-02-15 22:07 ` [PATCH 25/33] fsi: hub: " Eddie James
2024-02-15 22:07 ` [PATCH 26/33] ARM: dts: aspeed: FSI " Eddie James
2024-02-16  8:11   ` Krzysztof Kozlowski
2024-02-15 22:07 ` [PATCH 27/33] i2c: fsi: Calculate clock divider from local bus frequency Eddie James
2024-02-15 22:07 ` [PATCH 28/33] i2c: fsi: Improve formatting Eddie James
2024-02-15 22:07 ` [PATCH 29/33] i2c: fsi: Change fsi_i2c_write_reg to accept data instead of a pointer Eddie James
2024-02-15 22:07 ` [PATCH 30/33] i2c: fsi: Remove list structure of ports Eddie James
2024-02-15 22:07 ` [PATCH 31/33] i2c: fsi: Define a function to check status error bits Eddie James
2024-02-15 22:07 ` [PATCH 32/33] i2c: fsi: Add boolean for skip stop command on abort Eddie James
2024-02-15 22:07 ` [PATCH 33/33] i2c: fsi: Add interrupt support Eddie James

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240215220759.976998-13-eajames@linux.ibm.com \
    --to=eajames@linux.ibm.com \
    --cc=alistair@popple.id.au \
    --cc=andi.shyti@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jk@ozlabs.org \
    --cc=joel@jms.id.au \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-fsi@lists.ozlabs.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=robh@kernel.org \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).