From: Eddie James <eajames@linux.ibm.com>
To: linux-fsi@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org, linux-i2c@vger.kernel.org,
linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
andi.shyti@kernel.org, eajames@linux.ibm.com,
alistair@popple.id.au, joel@jms.id.au, jk@ozlabs.org,
sboyd@kernel.org, mturquette@baylibre.com, robh@kernel.org,
krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org
Subject: [PATCH 17/33] fsi: aspeed: Refactor trace functions
Date: Thu, 15 Feb 2024 16:07:43 -0600 [thread overview]
Message-ID: <20240215220759.976998-18-eajames@linux.ibm.com> (raw)
In-Reply-To: <20240215220759.976998-1-eajames@linux.ibm.com>
Remove the opb error trace, add a timeout trace, and combine the
read/write traces.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
drivers/fsi/fsi-master-aspeed.c | 29 +++------
include/trace/events/fsi_master_aspeed.h | 80 ++++++++----------------
2 files changed, 34 insertions(+), 75 deletions(-)
diff --git a/drivers/fsi/fsi-master-aspeed.c b/drivers/fsi/fsi-master-aspeed.c
index c36e7e49e965..1a91f3acdfcc 100644
--- a/drivers/fsi/fsi-master-aspeed.c
+++ b/drivers/fsi/fsi-master-aspeed.c
@@ -116,16 +116,17 @@ static int __opb_write(struct fsi_master_aspeed *aspeed, u32 addr,
status = readl(base + OPB0_STATUS);
- trace_fsi_master_aspeed_opb_write(addr, val, transfer_size, status, reg);
-
/* Return error when poll timed out */
- if (ret)
+ if (ret) {
+ trace_fsi_master_aspeed_timeout(reg, status, false);
return ret;
+ }
/* Command failed, master will reset */
if (status & STATUS_ERR_ACK)
return -EIO;
+ trace_fsi_master_aspeed_opb_xfer(addr, transfer_size + 1, val, false);
return 0;
}
@@ -169,13 +170,11 @@ static int __opb_read(struct fsi_master_aspeed *aspeed, uint32_t addr,
result = readl(base + OPB0_FSI_DATA_R);
- trace_fsi_master_aspeed_opb_read(addr, transfer_size, result,
- readl(base + OPB0_STATUS),
- reg);
-
/* Return error when poll timed out */
- if (ret)
+ if (ret) {
+ trace_fsi_master_aspeed_timeout(reg, status, true);
return ret;
+ }
/* Command failed, master will reset */
if (status & STATUS_ERR_ACK)
@@ -198,6 +197,7 @@ static int __opb_read(struct fsi_master_aspeed *aspeed, uint32_t addr,
}
+ trace_fsi_master_aspeed_opb_xfer(addr, transfer_size + 1, result, true);
return 0;
}
@@ -220,19 +220,6 @@ static int check_errors(struct fsi_master_aspeed *aspeed, int err)
{
int ret;
- if (trace_fsi_master_aspeed_opb_error_enabled()) {
- __be32 mresp0, mstap0, mesrb0;
-
- opb_readl(aspeed, ctrl_base + FSI_MRESP0, &mresp0);
- opb_readl(aspeed, ctrl_base + FSI_MSTAP0, &mstap0);
- opb_readl(aspeed, ctrl_base + FSI_MESRB0, &mesrb0);
-
- trace_fsi_master_aspeed_opb_error(
- be32_to_cpu(mresp0),
- be32_to_cpu(mstap0),
- be32_to_cpu(mesrb0));
- }
-
if (err == -EIO) {
/* Check MAEB (0x70) ? */
diff --git a/include/trace/events/fsi_master_aspeed.h b/include/trace/events/fsi_master_aspeed.h
index 0fff873775f1..7eeecbfec7f0 100644
--- a/include/trace/events/fsi_master_aspeed.h
+++ b/include/trace/events/fsi_master_aspeed.h
@@ -8,69 +8,41 @@
#include <linux/tracepoint.h>
-TRACE_EVENT(fsi_master_aspeed_opb_read,
- TP_PROTO(uint32_t addr, size_t size, uint32_t result, uint32_t status, uint32_t irq_status),
- TP_ARGS(addr, size, result, status, irq_status),
+TRACE_EVENT(fsi_master_aspeed_opb_xfer,
+ TP_PROTO(uint32_t addr, uint32_t size, uint32_t data, bool read),
+ TP_ARGS(addr, size, data, read),
TP_STRUCT__entry(
- __field(uint32_t, addr)
- __field(size_t, size)
- __field(uint32_t, result)
- __field(uint32_t, status)
- __field(uint32_t, irq_status)
- ),
+ __field(uint32_t, addr)
+ __field(uint32_t, size)
+ __field(uint32_t, data)
+ __field(bool, read)
+ ),
TP_fast_assign(
__entry->addr = addr;
__entry->size = size;
- __entry->result = result;
- __entry->status = status;
- __entry->irq_status = irq_status;
- ),
- TP_printk("addr %08x size %zu: result %08x sts: %08x irq_sts: %08x",
- __entry->addr, __entry->size, __entry->result,
- __entry->status, __entry->irq_status
- )
+ __entry->data = data;
+ __entry->read = read;
+ ),
+ TP_printk("%s addr %08x size %u data %08x", __entry->read ? "read" : "write",
+ __entry->addr, __entry->size, __entry->data)
);
-TRACE_EVENT(fsi_master_aspeed_opb_write,
- TP_PROTO(uint32_t addr, uint32_t val, size_t size, uint32_t status, uint32_t irq_status),
- TP_ARGS(addr, val, size, status, irq_status),
+TRACE_EVENT(fsi_master_aspeed_timeout,
+ TP_PROTO(uint32_t irq, uint32_t status, bool read),
+ TP_ARGS(irq, status, read),
TP_STRUCT__entry(
- __field(uint32_t, addr)
- __field(uint32_t, val)
- __field(size_t, size)
- __field(uint32_t, status)
- __field(uint32_t, irq_status)
- ),
+ __field(uint32_t, irq)
+ __field(uint32_t, status)
+ __field(bool, read)
+ ),
TP_fast_assign(
- __entry->addr = addr;
- __entry->val = val;
- __entry->size = size;
+ __entry->irq = irq;
__entry->status = status;
- __entry->irq_status = irq_status;
- ),
- TP_printk("addr %08x val %08x size %zu status: %08x irq_sts: %08x",
- __entry->addr, __entry->val, __entry->size,
- __entry->status, __entry->irq_status
- )
- );
-
-TRACE_EVENT(fsi_master_aspeed_opb_error,
- TP_PROTO(uint32_t mresp0, uint32_t mstap0, uint32_t mesrb0),
- TP_ARGS(mresp0, mstap0, mesrb0),
- TP_STRUCT__entry(
- __field(uint32_t, mresp0)
- __field(uint32_t, mstap0)
- __field(uint32_t, mesrb0)
- ),
- TP_fast_assign(
- __entry->mresp0 = mresp0;
- __entry->mstap0 = mstap0;
- __entry->mesrb0 = mesrb0;
- ),
- TP_printk("mresp0 %08x mstap0 %08x mesrb0 %08x",
- __entry->mresp0, __entry->mstap0, __entry->mesrb0
- )
- );
+ __entry->read = read;
+ ),
+ TP_printk("%s irq %08x status %08x", __entry->read ? "read" : "write", __entry->irq,
+ __entry->status)
+);
TRACE_EVENT(fsi_master_aspeed_cfam_reset,
TP_PROTO(bool start),
--
2.39.3
next prev parent reply other threads:[~2024-02-15 22:08 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-15 22:07 [PATCH 00/33] fsi: Interrupt support Eddie James
2024-02-15 22:07 ` [PATCH 01/33] dt-bindings: clock: ast2600: Add FSI clock Eddie James
2024-02-16 8:07 ` Krzysztof Kozlowski
2024-02-22 5:45 ` Stephen Boyd
2024-02-15 22:07 ` [PATCH 02/33] clk: ast2600: Add FSI parent clock with correct rate Eddie James
2024-02-22 5:46 ` Stephen Boyd
2024-02-15 22:07 ` [PATCH 03/33] fsi: Move slave definitions to fsi-slave.h Eddie James
2024-02-15 22:07 ` [PATCH 04/33] fsi: Improve master indexing Eddie James
2024-02-15 22:07 ` [PATCH 05/33] fsi: Use a defined value for default echo delay Eddie James
2024-02-15 22:07 ` [PATCH 06/33] fsi: Expose master-specific local bus clock divider Eddie James
2024-02-15 22:07 ` [PATCH 07/33] ARM: dts: aspeed: p10 and tacoma: Set FSI clock frequency Eddie James
2024-02-16 8:08 ` Krzysztof Kozlowski
2024-02-16 19:14 ` Eddie James
2024-02-22 12:33 ` Joel Stanley
2024-02-15 22:07 ` [PATCH 08/33] fsi: core: Improve master read/write/error traces Eddie James
2024-02-15 22:07 ` [PATCH 09/33] fsi: core: Add slave error trace Eddie James
2024-02-15 22:07 ` [PATCH 10/33] fsi: aspeed: Add AST2700 support Eddie James
2024-02-16 8:09 ` Krzysztof Kozlowski
2024-02-16 19:18 ` Eddie James
2024-02-15 22:07 ` [PATCH 11/33] fsi: core: Add slave spinlock Eddie James
2024-02-15 22:07 ` [PATCH 12/33] fsi: core: Allow cfam device type aliases Eddie James
2024-02-20 8:31 ` Dan Carpenter
2024-02-15 22:07 ` [PATCH 13/33] fsi: core: Add common regmap master functions Eddie James
2024-02-15 22:07 ` [PATCH 14/33] fsi: hub: Use common initialization and link enable Eddie James
2024-02-15 22:07 ` [PATCH 15/33] fsi: aspeed: " Eddie James
2024-02-15 22:07 ` [PATCH 16/33] fsi: aspeed: Remove cfam reset sysfs file in error path and remove Eddie James
2024-02-15 22:07 ` Eddie James [this message]
2024-02-15 22:07 ` [PATCH 18/33] fsi: aspeed: Don't clear all IRQs during OPB transfers Eddie James
2024-02-15 22:07 ` [PATCH 19/33] fsi: aspeed: Only read result register for successful read Eddie James
2024-02-15 22:07 ` [PATCH 20/33] fsi: aspeed: Switch to spinlock Eddie James
2024-02-15 22:07 ` [PATCH 21/33] fsi: aspeed: Disable relative addressing and IPOLL for cfam reset Eddie James
2024-02-15 22:07 ` [PATCH 22/33] fsi: aspeed: Use common master error handler Eddie James
2024-02-15 22:07 ` [PATCH 23/33] fsi: core: Add interrupt support Eddie James
2024-02-15 22:07 ` [PATCH 24/33] fsi: aspeed: " Eddie James
2024-02-15 22:07 ` [PATCH 25/33] fsi: hub: " Eddie James
2024-02-15 22:07 ` [PATCH 26/33] ARM: dts: aspeed: FSI " Eddie James
2024-02-16 8:11 ` Krzysztof Kozlowski
2024-02-15 22:07 ` [PATCH 27/33] i2c: fsi: Calculate clock divider from local bus frequency Eddie James
2024-02-15 22:07 ` [PATCH 28/33] i2c: fsi: Improve formatting Eddie James
2024-02-15 22:07 ` [PATCH 29/33] i2c: fsi: Change fsi_i2c_write_reg to accept data instead of a pointer Eddie James
2024-02-15 22:07 ` [PATCH 30/33] i2c: fsi: Remove list structure of ports Eddie James
2024-02-15 22:07 ` [PATCH 31/33] i2c: fsi: Define a function to check status error bits Eddie James
2024-02-15 22:07 ` [PATCH 32/33] i2c: fsi: Add boolean for skip stop command on abort Eddie James
2024-02-15 22:07 ` [PATCH 33/33] i2c: fsi: Add interrupt support Eddie James
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240215220759.976998-18-eajames@linux.ibm.com \
--to=eajames@linux.ibm.com \
--cc=alistair@popple.id.au \
--cc=andi.shyti@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jk@ozlabs.org \
--cc=joel@jms.id.au \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-fsi@lists.ozlabs.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).