From: Eddie James <eajames@linux.ibm.com>
To: linux-fsi@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org, linux-i2c@vger.kernel.org,
linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
andi.shyti@kernel.org, eajames@linux.ibm.com,
alistair@popple.id.au, joel@jms.id.au, jk@ozlabs.org,
sboyd@kernel.org, mturquette@baylibre.com, robh@kernel.org,
krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org
Subject: [PATCH 32/33] i2c: fsi: Add boolean for skip stop command on abort
Date: Thu, 15 Feb 2024 16:07:58 -0600 [thread overview]
Message-ID: <20240215220759.976998-33-eajames@linux.ibm.com> (raw)
In-Reply-To: <20240215220759.976998-1-eajames@linux.ibm.com>
In preparation for interrupt support, store whether to skip the
final stop command during the abort procedure instead of checking
the previously read status register in the abort function.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
drivers/i2c/busses/i2c-fsi.c | 18 +++++++++++-------
1 file changed, 11 insertions(+), 7 deletions(-)
diff --git a/drivers/i2c/busses/i2c-fsi.c b/drivers/i2c/busses/i2c-fsi.c
index 5f524fb6f0f8..33f4e64cb60b 100644
--- a/drivers/i2c/busses/i2c-fsi.c
+++ b/drivers/i2c/busses/i2c-fsi.c
@@ -116,6 +116,9 @@
#define I2C_STAT_ANY_RESP (I2C_STAT_ERR | \
I2C_STAT_DAT_REQ | \
I2C_STAT_CMD_COMP)
+#define I2C_STAT_SKIP_STOP (I2C_STAT_PARITY | \
+ I2C_STAT_LOST_ARB | \
+ I2C_STAT_STOP_ERR)
/* extended status register */
#define I2C_ESTAT_FIFO_SZ GENMASK(31, 24)
@@ -150,6 +153,7 @@ struct fsi_i2c_master {
struct mutex lock;
u32 clock_div;
u8 fifo_size;
+ bool skip_stop;
};
struct fsi_i2c_port {
@@ -459,31 +463,30 @@ static int fsi_i2c_reset_engine(struct fsi_i2c_master *i2c, u16 port)
return 0;
}
-static int fsi_i2c_abort(struct fsi_i2c_port *port, u32 status)
+static int fsi_i2c_abort(struct fsi_i2c_port *port)
{
struct fsi_i2c_master *i2c = port->master;
u32 cmd = I2C_CMD_WITH_STOP;
unsigned long start;
- u32 stat;
+ u32 status;
int rc;
rc = fsi_i2c_reset_engine(i2c, port->port);
if (rc)
return rc;
- rc = fsi_i2c_read_reg(i2c->fsi, I2C_FSI_STAT, &stat);
+ rc = fsi_i2c_read_reg(i2c->fsi, I2C_FSI_STAT, &status);
if (rc)
return rc;
/* if sda is low, peform full bus reset */
- if (!(stat & I2C_STAT_SDA_IN)) {
+ if (!(status & I2C_STAT_SDA_IN)) {
rc = fsi_i2c_reset_bus(i2c, port);
if (rc)
return rc;
}
- /* skip final stop command for these errors */
- if (status & (I2C_STAT_PARITY | I2C_STAT_LOST_ARB | I2C_STAT_STOP_ERR))
+ if (i2c->skip_stop)
return 0;
/* write stop command */
@@ -534,7 +537,8 @@ static int fsi_i2c_handle_status(struct fsi_i2c_port *port,
int rc;
if (status & I2C_STAT_ERR) {
- rc = fsi_i2c_abort(port, status);
+ port->master->skip_stop = status & I2C_STAT_SKIP_STOP;
+ rc = fsi_i2c_abort(port);
if (rc)
return rc;
--
2.39.3
next prev parent reply other threads:[~2024-02-15 22:08 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-15 22:07 [PATCH 00/33] fsi: Interrupt support Eddie James
2024-02-15 22:07 ` [PATCH 01/33] dt-bindings: clock: ast2600: Add FSI clock Eddie James
2024-02-16 8:07 ` Krzysztof Kozlowski
2024-02-22 5:45 ` Stephen Boyd
2024-02-15 22:07 ` [PATCH 02/33] clk: ast2600: Add FSI parent clock with correct rate Eddie James
2024-02-22 5:46 ` Stephen Boyd
2024-02-15 22:07 ` [PATCH 03/33] fsi: Move slave definitions to fsi-slave.h Eddie James
2024-02-15 22:07 ` [PATCH 04/33] fsi: Improve master indexing Eddie James
2024-02-15 22:07 ` [PATCH 05/33] fsi: Use a defined value for default echo delay Eddie James
2024-02-15 22:07 ` [PATCH 06/33] fsi: Expose master-specific local bus clock divider Eddie James
2024-02-15 22:07 ` [PATCH 07/33] ARM: dts: aspeed: p10 and tacoma: Set FSI clock frequency Eddie James
2024-02-16 8:08 ` Krzysztof Kozlowski
2024-02-16 19:14 ` Eddie James
2024-02-22 12:33 ` Joel Stanley
2024-02-15 22:07 ` [PATCH 08/33] fsi: core: Improve master read/write/error traces Eddie James
2024-02-15 22:07 ` [PATCH 09/33] fsi: core: Add slave error trace Eddie James
2024-02-15 22:07 ` [PATCH 10/33] fsi: aspeed: Add AST2700 support Eddie James
2024-02-16 8:09 ` Krzysztof Kozlowski
2024-02-16 19:18 ` Eddie James
2024-02-15 22:07 ` [PATCH 11/33] fsi: core: Add slave spinlock Eddie James
2024-02-15 22:07 ` [PATCH 12/33] fsi: core: Allow cfam device type aliases Eddie James
2024-02-20 8:31 ` Dan Carpenter
2024-02-15 22:07 ` [PATCH 13/33] fsi: core: Add common regmap master functions Eddie James
2024-02-15 22:07 ` [PATCH 14/33] fsi: hub: Use common initialization and link enable Eddie James
2024-02-15 22:07 ` [PATCH 15/33] fsi: aspeed: " Eddie James
2024-02-15 22:07 ` [PATCH 16/33] fsi: aspeed: Remove cfam reset sysfs file in error path and remove Eddie James
2024-02-15 22:07 ` [PATCH 17/33] fsi: aspeed: Refactor trace functions Eddie James
2024-02-15 22:07 ` [PATCH 18/33] fsi: aspeed: Don't clear all IRQs during OPB transfers Eddie James
2024-02-15 22:07 ` [PATCH 19/33] fsi: aspeed: Only read result register for successful read Eddie James
2024-02-15 22:07 ` [PATCH 20/33] fsi: aspeed: Switch to spinlock Eddie James
2024-02-15 22:07 ` [PATCH 21/33] fsi: aspeed: Disable relative addressing and IPOLL for cfam reset Eddie James
2024-02-15 22:07 ` [PATCH 22/33] fsi: aspeed: Use common master error handler Eddie James
2024-02-15 22:07 ` [PATCH 23/33] fsi: core: Add interrupt support Eddie James
2024-02-15 22:07 ` [PATCH 24/33] fsi: aspeed: " Eddie James
2024-02-15 22:07 ` [PATCH 25/33] fsi: hub: " Eddie James
2024-02-15 22:07 ` [PATCH 26/33] ARM: dts: aspeed: FSI " Eddie James
2024-02-16 8:11 ` Krzysztof Kozlowski
2024-02-15 22:07 ` [PATCH 27/33] i2c: fsi: Calculate clock divider from local bus frequency Eddie James
2024-02-15 22:07 ` [PATCH 28/33] i2c: fsi: Improve formatting Eddie James
2024-02-15 22:07 ` [PATCH 29/33] i2c: fsi: Change fsi_i2c_write_reg to accept data instead of a pointer Eddie James
2024-02-15 22:07 ` [PATCH 30/33] i2c: fsi: Remove list structure of ports Eddie James
2024-02-15 22:07 ` [PATCH 31/33] i2c: fsi: Define a function to check status error bits Eddie James
2024-02-15 22:07 ` Eddie James [this message]
2024-02-15 22:07 ` [PATCH 33/33] i2c: fsi: Add interrupt support Eddie James
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240215220759.976998-33-eajames@linux.ibm.com \
--to=eajames@linux.ibm.com \
--cc=alistair@popple.id.au \
--cc=andi.shyti@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jk@ozlabs.org \
--cc=joel@jms.id.au \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-fsi@lists.ozlabs.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).