From: Antonio Borneo <antonio.borneo@foss.st.com>
To: Thomas Gleixner <tglx@linutronix.de>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will@kernel.org>
Cc: Antonio Borneo <antonio.borneo@foss.st.com>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-stm32@st-md-mailman.stormreply.com>,
<linux-arm-kernel@lists.infradead.org>
Subject: [PATCH 04/12] irqchip/stm32-exti: Convert driver to standard PM
Date: Fri, 16 Feb 2024 10:47:49 +0100 [thread overview]
Message-ID: <20240216094758.916722-5-antonio.borneo@foss.st.com> (raw)
In-Reply-To: <20240216094758.916722-1-antonio.borneo@foss.st.com>
All driver's dependencies for suspend/resume have been fixed long
ago. There are no more reasons to use syscore PM for the part of
this driver related to Cortex-A MPU.
Switch to standard PM using NOIRQ_SYSTEM_SLEEP_PM_OPS, so all the
registers of the interrupt controller get resumed before any irq
gets enabled.
A side effect of this change is to drop the only global variable
'stm32_host_data', used to keep the driver's data for syscore_ops.
This makes the driver ready to support multiple EXTI instances.
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
---
drivers/irqchip/irq-stm32-exti.c | 58 ++++++++++----------------------
1 file changed, 17 insertions(+), 41 deletions(-)
diff --git a/drivers/irqchip/irq-stm32-exti.c b/drivers/irqchip/irq-stm32-exti.c
index 95bb3dd10b2c..de18cddf6b88 100644
--- a/drivers/irqchip/irq-stm32-exti.c
+++ b/drivers/irqchip/irq-stm32-exti.c
@@ -19,7 +19,7 @@
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/platform_device.h>
-#include <linux/syscore_ops.h>
+#include <linux/pm.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -64,8 +64,6 @@ struct stm32_exti_host_data {
struct device_node *irq_map_node;
};
-static struct stm32_exti_host_data *stm32_host_data;
-
static const struct stm32_exti_bank stm32f4xx_exti_b1 = {
.imr_ofst = 0x00,
.emr_ofst = 0x04,
@@ -622,50 +620,32 @@ static int stm32_exti_h_set_affinity(struct irq_data *d,
return IRQ_SET_MASK_OK_DONE;
}
-static int __maybe_unused stm32_exti_h_suspend(void)
+static int stm32_exti_h_suspend(struct device *dev)
{
+ struct stm32_exti_host_data *host_data = dev_get_drvdata(dev);
struct stm32_exti_chip_data *chip_data;
int i;
- for (i = 0; i < stm32_host_data->drv_data->bank_nr; i++) {
- chip_data = &stm32_host_data->chips_data[i];
- raw_spin_lock(&chip_data->rlock);
+ for (i = 0; i < host_data->drv_data->bank_nr; i++) {
+ chip_data = &host_data->chips_data[i];
stm32_chip_suspend(chip_data, chip_data->wake_active);
- raw_spin_unlock(&chip_data->rlock);
}
return 0;
}
-static void __maybe_unused stm32_exti_h_resume(void)
+static int stm32_exti_h_resume(struct device *dev)
{
+ struct stm32_exti_host_data *host_data = dev_get_drvdata(dev);
struct stm32_exti_chip_data *chip_data;
int i;
- for (i = 0; i < stm32_host_data->drv_data->bank_nr; i++) {
- chip_data = &stm32_host_data->chips_data[i];
- raw_spin_lock(&chip_data->rlock);
+ for (i = 0; i < host_data->drv_data->bank_nr; i++) {
+ chip_data = &host_data->chips_data[i];
stm32_chip_resume(chip_data, chip_data->mask_cache);
- raw_spin_unlock(&chip_data->rlock);
}
-}
-static struct syscore_ops stm32_exti_h_syscore_ops = {
-#ifdef CONFIG_PM_SLEEP
- .suspend = stm32_exti_h_suspend,
- .resume = stm32_exti_h_resume,
-#endif
-};
-
-static void stm32_exti_h_syscore_init(struct stm32_exti_host_data *host_data)
-{
- stm32_host_data = host_data;
- register_syscore_ops(&stm32_exti_h_syscore_ops);
-}
-
-static void stm32_exti_h_syscore_deinit(void)
-{
- unregister_syscore_ops(&stm32_exti_h_syscore_ops);
+ return 0;
}
static int stm32_exti_h_retrigger(struct irq_data *d)
@@ -792,8 +772,6 @@ stm32_exti_host_data *stm32_exti_host_init(const struct stm32_exti_drv_data *dd,
goto free_chips_data;
}
- stm32_host_data = host_data;
-
return host_data;
free_chips_data:
@@ -919,12 +897,6 @@ static void stm32_exti_remove_irq(void *data)
irq_domain_remove(domain);
}
-static int stm32_exti_remove(struct platform_device *pdev)
-{
- stm32_exti_h_syscore_deinit();
- return 0;
-}
-
static int stm32_exti_probe(struct platform_device *pdev)
{
int ret, i;
@@ -938,6 +910,8 @@ static int stm32_exti_probe(struct platform_device *pdev)
if (!host_data)
return -ENOMEM;
+ dev_set_drvdata(dev, host_data);
+
/* check for optional hwspinlock which may be not available yet */
ret = of_hwspin_lock_get_id(np, 0);
if (ret == -EPROBE_DEFER)
@@ -1001,8 +975,6 @@ static int stm32_exti_probe(struct platform_device *pdev)
if (child && of_property_read_bool(child, "interrupt-map"))
host_data->irq_map_node = child;
- stm32_exti_h_syscore_init(host_data);
-
return 0;
}
@@ -1014,12 +986,16 @@ static const struct of_device_id stm32_exti_ids[] = {
};
MODULE_DEVICE_TABLE(of, stm32_exti_ids);
+static const struct dev_pm_ops stm32_exti_dev_pm_ops = {
+ NOIRQ_SYSTEM_SLEEP_PM_OPS(stm32_exti_h_suspend, stm32_exti_h_resume)
+};
+
static struct platform_driver stm32_exti_driver = {
.probe = stm32_exti_probe,
- .remove = stm32_exti_remove,
.driver = {
.name = "stm32_exti",
.of_match_table = stm32_exti_ids,
+ .pm = &stm32_exti_dev_pm_ops,
},
};
--
2.34.1
next prev parent reply other threads:[~2024-02-16 9:49 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-16 9:47 [PATCH 00/12] irqchip/stm32-exti: add irq-map and STM32MP25 support Antonio Borneo
2024-02-16 9:47 ` [PATCH 01/12] irqchip/stm32-exti: Fix minor indentation issue Antonio Borneo
2024-02-19 14:16 ` Thomas Gleixner
2024-02-16 9:47 ` [PATCH 02/12] dt-bindings: interrupt-controller: stm32-exti: Add irq nexus child node Antonio Borneo
2024-02-19 14:19 ` Thomas Gleixner
2024-04-15 13:37 ` Antonio Borneo
2024-02-22 23:43 ` Rob Herring
2024-02-23 13:39 ` Antonio Borneo
2024-02-16 9:47 ` [PATCH 03/12] irqchip/stm32-exti: Map interrupts through interrupt nexus node Antonio Borneo
2024-02-19 14:22 ` Thomas Gleixner
2024-02-16 9:47 ` Antonio Borneo [this message]
2024-02-16 9:47 ` [PATCH 05/12] irqchip/stm32-exti: Skip secure events Antonio Borneo
2024-02-16 9:47 ` [PATCH 06/12] irqchip/stm32-exti: Mark events reserved with RIF configuration check Antonio Borneo
2024-02-16 9:47 ` [PATCH 07/12] arm64: Kconfig.platforms: Enable STM32_EXTI for ARCH_STM32 Antonio Borneo
2024-02-16 9:47 ` [PATCH 08/12] ARM: dts: stm32: Use exti interrupt-map on stm32mp151 Antonio Borneo
2024-02-16 9:47 ` [PATCH 09/12] ARM: dts: stm32: Use exti interrupt-map on stm32mp131 Antonio Borneo
2024-02-16 9:47 ` [PATCH 10/12] arm64: dts: st: Add v2m to GIC node on stm32mp251 Antonio Borneo
2024-02-16 9:47 ` [PATCH 11/12] arm64: dts: st: Add exti1 and exti2 nodes " Antonio Borneo
2024-02-16 9:47 ` [PATCH 12/12] arm64: dts: st: Add interrupt parent to pinctrl " Antonio Borneo
2024-04-15 13:49 ` [PATCH v2 00/11] irqchip/stm32-exti: add irq map in DT and STM32MP25 support Antonio Borneo
2024-04-15 13:49 ` [PATCH v2 01/11] irqchip/stm32-exti: Fix minor indentation issue Antonio Borneo
2024-04-15 13:49 ` [PATCH v2 02/11] dt-bindings: interrupt-controller: stm32-exti: Add irq mapping to parent Antonio Borneo
2024-04-17 18:09 ` Rob Herring
2024-04-15 13:49 ` [PATCH v2 03/11] irqchip/stm32-exti: Map interrupts through interrupts-extended Antonio Borneo
2024-04-15 13:49 ` [PATCH v2 04/11] irqchip/stm32-exti: Convert driver to standard PM Antonio Borneo
2024-04-15 13:49 ` [PATCH v2 05/11] irqchip/stm32-exti: Skip secure events Antonio Borneo
2024-04-15 13:49 ` [PATCH v2 06/11] irqchip/stm32-exti: Mark events reserved with RIF configuration check Antonio Borneo
2024-04-15 13:49 ` [PATCH v2 07/11] arm64: Kconfig.platforms: Enable STM32_EXTI for ARCH_STM32 Antonio Borneo
2024-04-15 13:49 ` [PATCH v2 08/11] ARM: dts: stm32: List exti parent interrupts on stm32mp151 Antonio Borneo
2024-04-15 13:49 ` [PATCH v2 09/11] ARM: dts: stm32: List exti parent interrupts on stm32mp131 Antonio Borneo
2024-04-15 13:49 ` [PATCH v2 10/11] arm64: dts: st: Add exti1 and exti2 nodes on stm32mp251 Antonio Borneo
2024-04-15 13:49 ` [PATCH v2 11/11] arm64: dts: st: Add interrupt parent to pinctrl " Antonio Borneo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240216094758.916722-5-antonio.borneo@foss.st.com \
--to=antonio.borneo@foss.st.com \
--cc=alexandre.torgue@foss.st.com \
--cc=catalin.marinas@arm.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=robh+dt@kernel.org \
--cc=tglx@linutronix.de \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).