From: Gregory CLEMENT <gregory.clement@bootlin.com>
To: Paul Burton <paulburton@kernel.org>,
Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
linux-mips@vger.kernel.org, Jiaxun Yang <jiaxun.yang@flygoat.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: "Vladimir Kondratiev" <vladimir.kondratiev@mobileye.com>,
"Tawfik Bayouk" <tawfik.bayouk@mobileye.com>,
"Alexandre Belloni" <alexandre.belloni@bootlin.com>,
"Théo Lebrun" <theo.lebrun@bootlin.com>,
"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
"Gregory CLEMENT" <gregory.clement@bootlin.com>
Subject: [PATCH v8 10/14] MIPS: mobileye: Add EyeQ5 dtsi
Date: Fri, 16 Feb 2024 18:42:19 +0100 [thread overview]
Message-ID: <20240216174227.409400-11-gregory.clement@bootlin.com> (raw)
In-Reply-To: <20240216174227.409400-1-gregory.clement@bootlin.com>
Add a device tree include file for the Mobileye EyeQ5 SoC.
Based on the work of Slava Samsonov <stanislav.samsonov@intel.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
arch/mips/boot/dts/Makefile | 1 +
.../boot/dts/mobileye/eyeq5-fixed-clocks.dtsi | 292 ++++++++++++++++++
arch/mips/boot/dts/mobileye/eyeq5.dtsi | 124 ++++++++
3 files changed, 417 insertions(+)
create mode 100644 arch/mips/boot/dts/mobileye/eyeq5-fixed-clocks.dtsi
create mode 100644 arch/mips/boot/dts/mobileye/eyeq5.dtsi
diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile
index 928f38a79dff9..efff87cb33a9e 100644
--- a/arch/mips/boot/dts/Makefile
+++ b/arch/mips/boot/dts/Makefile
@@ -8,6 +8,7 @@ subdir-$(CONFIG_LANTIQ) += lantiq
subdir-$(CONFIG_MACH_LOONGSON64) += loongson
subdir-$(CONFIG_SOC_VCOREIII) += mscc
subdir-$(CONFIG_MIPS_MALTA) += mti
+subdir-$(CONFIG_MACH_EYEQ5) += mobileye
subdir-$(CONFIG_LEGACY_BOARD_SEAD3) += mti
subdir-$(CONFIG_FIT_IMAGE_FDT_NI169445) += ni
subdir-$(CONFIG_MACH_PIC32) += pic32
diff --git a/arch/mips/boot/dts/mobileye/eyeq5-fixed-clocks.dtsi b/arch/mips/boot/dts/mobileye/eyeq5-fixed-clocks.dtsi
new file mode 100644
index 0000000000000..78f5533a95c67
--- /dev/null
+++ b/arch/mips/boot/dts/mobileye/eyeq5-fixed-clocks.dtsi
@@ -0,0 +1,292 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright 2023 Mobileye Vision Technologies Ltd.
+ */
+
+/ {
+ /* Fixed clock */
+ pll_cpu: pll-cpu {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1500000000>;
+ };
+
+ pll_vdi: pll-vdi {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1280000000>;
+ };
+
+ pll_per: pll-per {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <2000000000>;
+ };
+
+ pll_ddr0: pll-ddr0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1857210000>;
+ };
+
+ pll_ddr1: pll-ddr1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1857210000>;
+ };
+
+/* PLL_CPU derivatives */
+ occ_cpu: occ-cpu {
+ compatible = "fixed-factor-clock";
+ clocks = <&pll_cpu>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ };
+ si_css0_ref_clk: si-css0-ref-clk { /* gate ClkRstGen_si_css0_ref */
+ compatible = "fixed-factor-clock";
+ clocks = <&occ_cpu>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ };
+ cpc_clk: cpc-clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&si_css0_ref_clk>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ };
+ core0_clk: core0-clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&si_css0_ref_clk>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ };
+ core1_clk: core1-clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&si_css0_ref_clk>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ };
+ core2_clk: core2-clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&si_css0_ref_clk>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ };
+ core3_clk: core3-clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&si_css0_ref_clk>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ };
+ cm_clk: cm-clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&si_css0_ref_clk>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ };
+ mem_clk: mem-clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&si_css0_ref_clk>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ };
+ occ_isram: occ-isram {
+ compatible = "fixed-factor-clock";
+ clocks = <&pll_cpu>;
+ #clock-cells = <0>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+ isram_clk: isram-clk { /* gate ClkRstGen_isram */
+ compatible = "fixed-factor-clock";
+ clocks = <&occ_isram>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ };
+ occ_dbu: occ-dbu {
+ compatible = "fixed-factor-clock";
+ clocks = <&pll_cpu>;
+ #clock-cells = <0>;
+ clock-div = <10>;
+ clock-mult = <1>;
+ };
+ si_dbu_tp_pclk: si-dbu-tp-pclk { /* gate ClkRstGen_dbu */
+ compatible = "fixed-factor-clock";
+ clocks = <&occ_dbu>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ };
+/* PLL_VDI derivatives */
+ occ_vdi: occ-vdi {
+ compatible = "fixed-factor-clock";
+ clocks = <&pll_vdi>;
+ #clock-cells = <0>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+ vdi_clk: vdi-clk { /* gate ClkRstGen_vdi */
+ compatible = "fixed-factor-clock";
+ clocks = <&occ_vdi>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ };
+ occ_can_ser: occ-can-ser {
+ compatible = "fixed-factor-clock";
+ clocks = <&pll_vdi>;
+ #clock-cells = <0>;
+ clock-div = <16>;
+ clock-mult = <1>;
+ };
+ can_ser_clk: can-ser-clk { /* gate ClkRstGen_can_ser */
+ compatible = "fixed-factor-clock";
+ clocks = <&occ_can_ser>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ };
+ i2c_ser_clk: i2c-ser-clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&pll_vdi>;
+ #clock-cells = <0>;
+ clock-div = <20>;
+ clock-mult = <1>;
+ };
+/* PLL_PER derivatives */
+ occ_periph: occ-periph {
+ compatible = "fixed-factor-clock";
+ clocks = <&pll_per>;
+ #clock-cells = <0>;
+ clock-div = <16>;
+ clock-mult = <1>;
+ };
+ periph_clk: periph-clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&occ_periph>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ };
+ can_clk: can-clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&occ_periph>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ };
+ spi_clk: spi-clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&occ_periph>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ };
+ uart_clk: uart-clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&occ_periph>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ };
+ i2c_clk: i2c-clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&occ_periph>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ clock-output-names = "i2c_clk";
+ };
+ timer_clk: timer-clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&occ_periph>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ clock-output-names = "timer_clk";
+ };
+ gpio_clk: gpio-clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&occ_periph>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ clock-output-names = "gpio_clk";
+ };
+ emmc_sys_clk: emmc-sys-clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&pll_per>;
+ #clock-cells = <0>;
+ clock-div = <10>;
+ clock-mult = <1>;
+ clock-output-names = "emmc_sys_clk";
+ };
+ ccf_ctrl_clk: ccf-ctrl-clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&pll_per>;
+ #clock-cells = <0>;
+ clock-div = <4>;
+ clock-mult = <1>;
+ clock-output-names = "ccf_ctrl_clk";
+ };
+ occ_mjpeg_core: occ-mjpeg-core {
+ compatible = "fixed-factor-clock";
+ clocks = <&pll_per>;
+ #clock-cells = <0>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ clock-output-names = "occ_mjpeg_core";
+ };
+ hsm_clk: hsm-clk { /* gate ClkRstGen_hsm */
+ compatible = "fixed-factor-clock";
+ clocks = <&occ_mjpeg_core>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ clock-output-names = "hsm_clk";
+ };
+ mjpeg_core_clk: mjpeg-core-clk { /* gate ClkRstGen_mjpeg_gen */
+ compatible = "fixed-factor-clock";
+ clocks = <&occ_mjpeg_core>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ clock-output-names = "mjpeg_core_clk";
+ };
+ fcmu_a_clk: fcmu-a-clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&pll_per>;
+ #clock-cells = <0>;
+ clock-div = <20>;
+ clock-mult = <1>;
+ clock-output-names = "fcmu_a_clk";
+ };
+ occ_pci_sys: occ-pci-sys {
+ compatible = "fixed-factor-clock";
+ clocks = <&pll_per>;
+ #clock-cells = <0>;
+ clock-div = <8>;
+ clock-mult = <1>;
+ clock-output-names = "occ_pci_sys";
+ };
+ pclk: pclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <250000000>; /* 250MHz */
+ };
+ tsu_clk: tsu-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>; /* 125MHz */
+ };
+};
diff --git a/arch/mips/boot/dts/mobileye/eyeq5.dtsi b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
new file mode 100644
index 0000000000000..6cc5980e2fa17
--- /dev/null
+++ b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+/*
+* Copyright 2023 Mobileye Vision Technologies Ltd.
+*/
+
+#include <dt-bindings/interrupt-controller/mips-gic.h>
+
+#include "eyeq5-fixed-clocks.dtsi"
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "img,i6500";
+ reg = <0>;
+ clocks = <&core0_clk>;
+ };
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* These reserved memory regions are also defined in bootmanager
+ * for configuring inbound translation for BARS, don't change
+ * these without syncing with bootmanager
+ */
+ shmem0_reserved: shmem@804000000 {
+ reg = <0x8 0x04000000 0x0 0x1000000>;
+ };
+ shmem1_reserved: shmem@805000000 {
+ reg = <0x8 0x05000000 0x0 0x1000000>;
+ };
+ pci0_msi_reserved: pci0-msi@806000000 {
+ reg = <0x8 0x06000000 0x0 0x100000>;
+ };
+ pci1_msi_reserved: pci1-msi@806100000 {
+ reg = <0x8 0x06100000 0x0 0x100000>;
+ };
+
+ mini_coredump0_reserved: mini-coredump0@806200000 {
+ reg = <0x8 0x06200000 0x0 0x100000>;
+ };
+ mhm_reserved_0: the-mhm-reserved-0@0 {
+ reg = <0x8 0x00000000 0x0 0x0000800>;
+ };
+ };
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ };
+
+ cpu_intc: interrupt-controller {
+ compatible = "mti,cpu-interrupt-controller";
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+
+ soc: soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ compatible = "simple-bus";
+
+ uart0: serial@800000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0 0x800000 0x0 0x1000>;
+ reg-io-width = <4>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 6 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart_clk>, <&occ_periph>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ uart1: serial@900000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0 0x900000 0x0 0x1000>;
+ reg-io-width = <4>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 6 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart_clk>, <&occ_periph>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ uart2: serial@a00000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0 0xa00000 0x0 0x1000>;
+ reg-io-width = <4>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 6 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart_clk>, <&occ_periph>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ gic: interrupt-controller@140000 {
+ compatible = "mti,gic";
+ reg = <0x0 0x140000 0x0 0x20000>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+
+ /*
+ * Declare the interrupt-parent even though the mti,gic
+ * binding doesn't require it, such that the kernel can
+ * figure out that cpu_intc is the root interrupt
+ * controller & should be probed first.
+ */
+ interrupt-parent = <&cpu_intc>;
+
+ timer {
+ compatible = "mti,gic-timer";
+ interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
+ clocks = <&core0_clk>;
+ };
+ };
+ };
+};
--
2.43.0
next prev parent reply other threads:[~2024-02-16 17:42 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-16 17:42 [PATCH v8 00/14] Add support for the Mobileye EyeQ5 SoC Gregory CLEMENT
2024-02-16 17:42 ` [PATCH v8 01/14] MIPS: spaces: Define a couple of handy macros Gregory CLEMENT
2024-02-16 17:42 ` [PATCH v8 02/14] MIPS: Fix set_uncached_handler for ebase in XKPHYS Gregory CLEMENT
2024-02-16 17:42 ` [PATCH v8 03/14] MIPS: Allows relocation exception vectors everywhere Gregory CLEMENT
2024-02-16 17:42 ` [PATCH v8 04/14] MIPS: traps: Give more explanations if ebase doesn't belong to KSEG0 Gregory CLEMENT
2024-02-16 17:42 ` [PATCH v8 05/14] MIPS: cps-vec: Use macros for 64bits access Gregory CLEMENT
2024-02-16 17:42 ` [PATCH v8 06/14] dt-bindings: Add vendor prefix for Mobileye Vision Technologies Ltd Gregory CLEMENT
2024-02-16 17:42 ` [PATCH v8 07/14] dt-bindings: mips: cpus: Sort the entries Gregory CLEMENT
2024-02-16 17:42 ` [PATCH v8 08/14] dt-bindings: mips: cpu: Add I-Class I6500 Multiprocessor Core Gregory CLEMENT
2024-02-16 17:42 ` [PATCH v8 09/14] dt-bindings: mips: Add bindings for Mobileye SoCs Gregory CLEMENT
2024-02-16 17:42 ` Gregory CLEMENT [this message]
2024-02-16 17:42 ` [PATCH v8 11/14] MIPS: mobileye: Add EPM5 device tree Gregory CLEMENT
2024-02-16 17:42 ` [PATCH v8 12/14] MIPS: Share generic kernel code with other architecture Gregory CLEMENT
2024-02-16 17:42 ` [PATCH v8 13/14] MIPS: Add support for Mobileye EyeQ5 Gregory CLEMENT
2024-02-16 17:42 ` [PATCH v8 14/14] MAINTAINERS: Add entry for Mobileye MIPS SoCs Gregory CLEMENT
2024-02-20 13:44 ` [PATCH v8 00/14] Add support for the Mobileye EyeQ5 SoC Thomas Bogendoerfer
2024-02-28 11:44 ` Théo Lebrun
2024-03-01 9:39 ` Thomas Bogendoerfer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240216174227.409400-11-gregory.clement@bootlin.com \
--to=gregory.clement@bootlin.com \
--cc=alexandre.belloni@bootlin.com \
--cc=devicetree@vger.kernel.org \
--cc=jiaxun.yang@flygoat.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=paulburton@kernel.org \
--cc=robh+dt@kernel.org \
--cc=tawfik.bayouk@mobileye.com \
--cc=theo.lebrun@bootlin.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=tsbogend@alpha.franken.de \
--cc=vladimir.kondratiev@mobileye.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).