Re: [PATCH RFC 4/4] dt-binding: clock: hisilicon,clock-reset-controller: add Hi3798MV200 SoC support

[Rob Herring <robh@kernel.org>]

On Fri, Feb 16, 2024 at 07:37:54PM +0800, Yang Xiwen wrote:
> This SoC is similar to Hi3798CV200.
> 
> Also document the specific DLL regs and add an example for it.
> 
> Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
> ---
>  .../clock/hisilicon,clock-reset-generator.yaml     | 36 ++++++++++++++++++++++
>  1 file changed, 36 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/clock/hisilicon,clock-reset-generator.yaml b/Documentation/devicetree/bindings/clock/hisilicon,clock-reset-generator.yaml
> index d37cd892473e..8ee844574eda 100644
> --- a/Documentation/devicetree/bindings/clock/hisilicon,clock-reset-generator.yaml
> +++ b/Documentation/devicetree/bindings/clock/hisilicon,clock-reset-generator.yaml
> @@ -44,12 +44,17 @@ properties:
>            - hisilicon,hi3519-crg
>            - hisilicon,hi3798cv200-crg
>            - hisilicon,hi3798cv200-sysctrl
> +          - hisilicon,hi3798mv200-crg
> +          - hisilicon,hi3798mv200-sysctrl
>        - const: syscon
>        - const: simple-mfd
>  
>    reg:
>      maxItems: 1
>  
> +  ranges:
> +    maxItems: 1
> +
>    '#clock-cells':
>      const: 1
>  
> @@ -87,6 +92,12 @@ properties:
>      description: |
>        Reset controller for Hi3798CV200 GMAC module
>  
> +patternProperties:
> +  '.*-dll@[0-9a-f]+':
> +    type: object
> +    description: |
> +      eMMC/SD delay-locked-loop (DLL) register subnode
> +
>  required:
>    - compatible
>    - '#clock-cells'
> @@ -137,3 +148,28 @@ examples:
>              #clock-cells = <1>;
>          };
>      };
> +  - |
> +    crg: clock-reset-controller@8a22000 {
> +        compatible = "hisilicon,hi3798mv200-crg", "syscon", "simple-mfd";
> +        reg = <0x8a22000 0x1000>;
> +        ranges = <0x0 0x8a22000 0x1000>;
> +        #address-cells = <1>;
> +        #size-cells = <1>;
> +        #clock-cells = <1>;
> +        #reset-cells = <2>;
> +
> +        emmc_sap_dll: sap-dll@39c {
> +            compatible = "hisilicon,sdmmc-sap-dll", "syscon", "simple-mfd";

No child nodes, not a simple-mfd.

> +            reg = <0x39c 0x8>;

I imagine you are linking to this node from the SD host controller node 
with some custom property. Instead of defining the register address 
here, link to the parent node (&crg) instead and make the offset the 2nd 
cell.

> +        };
> +
> +        sdio0_sap_dll: sap-dll@3a4 {
> +            compatible = "hisilicon,sdmmc-sap-dll", "syscon", "simple-mfd";
> +            reg = <0x3a4 0x8>;
> +        };
> +
> +        sdio1_sap_dll: sap-dll@3ac {
> +            compatible = "hisilicon,sdmmc-sap-dll", "syscon", "simple-mfd";
> +            reg = <0x3ac 0x8>;
> +        };
> +    };
> 
> -- 
> 2.43.0
>