From: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Will Deacon <will@kernel.org>,
Robin Murphy <robin.murphy@arm.com>,
Joerg Roedel <joro@8bytes.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>, Rob Clark <robdclark@gmail.com>,
Abhinav Kumar <quic_abhinavk@quicinc.com>,
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
Sean Paul <sean@poorly.run>, David Airlie <airlied@gmail.com>,
Daniel Vetter <daniel@ffwll.ch>
Cc: Marijn Suijten <marijn.suijten@somainline.org>,
linux-arm-kernel@lists.infradead.org, iommu@lists.linux.dev,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Konrad Dybcio <konradybcio@kernel.org>,
linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
dri-devel@lists.freedesktop.org,
freedreno@lists.freedesktop.org,
Konrad Dybcio <konrad.dybcio@linaro.org>
Subject: [PATCH 4/8] clk: qcom: Add QCM2290 GPU clock controller driver
Date: Mon, 19 Feb 2024 14:35:49 +0100 [thread overview]
Message-ID: <20240219-topic-rb1_gpu-v1-4-d260fa854707@linaro.org> (raw)
In-Reply-To: <20240219-topic-rb1_gpu-v1-0-d260fa854707@linaro.org>
Add a driver for the GPU clock controller block found on the QCM2290 SoC.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
drivers/clk/qcom/Kconfig | 9 +
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/gpucc-qcm2290.c | 423 +++++++++++++++++++++++++++++++++++++++
3 files changed, 433 insertions(+)
diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 4580edbd13ea..d70ea4548755 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -65,6 +65,15 @@ config CLK_X1E80100_TCSRCC
Support for the TCSR clock controller on X1E80100 devices.
Say Y if you want to use peripheral devices such as SD/UFS.
+config CLK_QCM2290_GPUCC
+ tristate "QCM2290 Graphics Clock Controller"
+ depends on ARM64 || COMPILE_TEST
+ select CLK_QCM2290_GCC
+ help
+ Support for the graphics clock controller on QCM2290 devices.
+ Say Y if you want to support graphics controller devices and
+ functionality such as 3D graphics.
+
config QCOM_A53PLL
tristate "MSM8916 A53 PLL"
help
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 1da65ca78e24..b8d49c054558 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_CLK_X1E80100_DISPCC) += dispcc-x1e80100.o
obj-$(CONFIG_CLK_X1E80100_GCC) += gcc-x1e80100.o
obj-$(CONFIG_CLK_X1E80100_GPUCC) += gpucc-x1e80100.o
obj-$(CONFIG_CLK_X1E80100_TCSRCC) += tcsrcc-x1e80100.o
+obj-$(CONFIG_CLK_QCM2290_GPUCC) += gpucc-qcm2290.o
obj-$(CONFIG_IPQ_APSS_PLL) += apss-ipq-pll.o
obj-$(CONFIG_IPQ_APSS_6018) += apss-ipq6018.o
obj-$(CONFIG_IPQ_GCC_4019) += gcc-ipq4019.o
diff --git a/drivers/clk/qcom/gpucc-qcm2290.c b/drivers/clk/qcom/gpucc-qcm2290.c
new file mode 100644
index 000000000000..b6e20d63ac85
--- /dev/null
+++ b/drivers/clk/qcom/gpucc-qcm2290.c
@@ -0,0 +1,423 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2024, Linaro Limited
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_clock.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/qcom,qcm2290-gpucc.h>
+
+#include "clk-alpha-pll.h"
+#include "clk-branch.h"
+#include "clk-rcg.h"
+#include "clk-regmap.h"
+#include "clk-regmap-divider.h"
+#include "clk-regmap-mux.h"
+#include "clk-regmap-phy-mux.h"
+#include "gdsc.h"
+#include "reset.h"
+
+enum {
+ DT_GCC_AHB_CLK,
+ DT_BI_TCXO,
+ DT_GCC_GPU_GPLL0_CLK_SRC,
+ DT_GCC_GPU_GPLL0_DIV_CLK_SRC,
+};
+
+enum {
+ P_BI_TCXO,
+ P_GPLL0_OUT_MAIN,
+ P_GPLL0_OUT_MAIN_DIV,
+ P_GPU_CC_PLL0_2X_DIV_CLK_SRC,
+ P_GPU_CC_PLL0_OUT_AUX,
+ P_GPU_CC_PLL0_OUT_AUX2,
+ P_GPU_CC_PLL0_OUT_MAIN,
+};
+
+static const struct pll_vco huayra_vco[] = {
+ { 600000000, 3300000000, 0 },
+ { 600000000, 2200000000, 1 },
+};
+
+static const struct alpha_pll_config gpu_cc_pll0_config = {
+ .l = 0x25,
+ .config_ctl_val = 0x200d4828,
+ .config_ctl_hi_val = 0x6,
+ .test_ctl_val = GENMASK(28, 26),
+ .test_ctl_hi_val = BIT(14),
+ .user_ctl_val = 0xf,
+};
+
+static struct clk_alpha_pll gpu_cc_pll0 = {
+ .offset = 0x0,
+ .vco_table = huayra_vco,
+ .num_vco = ARRAY_SIZE(huayra_vco),
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_HUAYRA_2290],
+ .clkr = {
+ .hw.init = &(struct clk_init_data){
+ .name = "gpu_cc_pll0",
+ .parent_data = &(const struct clk_parent_data) {
+ .index = DT_BI_TCXO,
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_huayra_ops,
+ },
+ },
+};
+
+static const struct parent_map gpu_cc_parent_map_0[] = {
+ { P_BI_TCXO, 0 },
+ { P_GPU_CC_PLL0_OUT_MAIN, 1 },
+ { P_GPLL0_OUT_MAIN, 5 },
+ { P_GPLL0_OUT_MAIN_DIV, 6 },
+};
+
+static const struct clk_parent_data gpu_cc_parent_data_0[] = {
+ { .index = DT_BI_TCXO, },
+ { .hw = &gpu_cc_pll0.clkr.hw, },
+ { .index = DT_GCC_GPU_GPLL0_CLK_SRC, },
+ { .index = DT_GCC_GPU_GPLL0_DIV_CLK_SRC, },
+};
+
+static const struct parent_map gpu_cc_parent_map_1[] = {
+ { P_BI_TCXO, 0 },
+ { P_GPU_CC_PLL0_2X_DIV_CLK_SRC, 1 },
+ { P_GPU_CC_PLL0_OUT_AUX2, 2 },
+ { P_GPU_CC_PLL0_OUT_AUX, 3 },
+ { P_GPLL0_OUT_MAIN, 5 },
+};
+
+static const struct clk_parent_data gpu_cc_parent_data_1[] = {
+ { .index = DT_BI_TCXO, },
+ { .hw = &gpu_cc_pll0.clkr.hw, },
+ { .hw = &gpu_cc_pll0.clkr.hw, },
+ { .hw = &gpu_cc_pll0.clkr.hw, },
+ { .index = DT_GCC_GPU_GPLL0_CLK_SRC, },
+};
+
+static const struct freq_tbl ftbl_gpu_cc_gmu_clk_src[] = {
+ F(200000000, P_GPLL0_OUT_MAIN, 3, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 gpu_cc_gmu_clk_src = {
+ .cmd_rcgr = 0x1120,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = gpu_cc_parent_map_0,
+ .freq_tbl = ftbl_gpu_cc_gmu_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gpu_cc_gmu_clk_src",
+ .parent_data = gpu_cc_parent_data_0,
+ .num_parents = ARRAY_SIZE(gpu_cc_parent_data_0),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_gpu_cc_gx_gfx3d_clk_src[] = {
+ F(355200000, P_GPU_CC_PLL0_OUT_AUX, 2, 0, 0),
+ F(537600000, P_GPU_CC_PLL0_OUT_AUX2, 2, 0, 0),
+ F(672000000, P_GPU_CC_PLL0_OUT_AUX2, 2, 0, 0),
+ F(844800000, P_GPU_CC_PLL0_OUT_AUX2, 2, 0, 0),
+ F(921600000, P_GPU_CC_PLL0_OUT_AUX2, 2, 0, 0),
+ F(1017600000, P_GPU_CC_PLL0_OUT_AUX2, 2, 0, 0),
+ F(1123200000, P_GPU_CC_PLL0_OUT_AUX2, 2, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 gpu_cc_gx_gfx3d_clk_src = {
+ .cmd_rcgr = 0x101c,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = gpu_cc_parent_map_1,
+ .freq_tbl = ftbl_gpu_cc_gx_gfx3d_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gpu_cc_gx_gfx3d_clk_src",
+ .parent_data = gpu_cc_parent_data_1,
+ .num_parents = ARRAY_SIZE(gpu_cc_parent_data_1),
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_branch gpu_cc_ahb_clk = {
+ .halt_reg = 0x1078,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x1078,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpu_cc_ahb_clk",
+ .flags = CLK_IS_CRITICAL,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gpu_cc_crc_ahb_clk = {
+ .halt_reg = 0x107c,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x107c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpu_cc_crc_ahb_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gpu_cc_cx_gfx3d_clk = {
+ .halt_reg = 0x10a4,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x10a4,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpu_cc_cx_gfx3d_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &gpu_cc_gx_gfx3d_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gpu_cc_cx_gmu_clk = {
+ .halt_reg = 0x1098,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x1098,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpu_cc_cx_gmu_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &gpu_cc_gmu_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gpu_cc_cx_snoc_dvm_clk = {
+ .halt_reg = 0x108c,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x108c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpu_cc_cx_snoc_dvm_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gpu_cc_cxo_aon_clk = {
+ .halt_reg = 0x1004,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x1004,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpu_cc_cxo_aon_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gpu_cc_cxo_clk = {
+ .halt_reg = 0x109c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x109c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpu_cc_cxo_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gpu_cc_gx_gfx3d_clk = {
+ .halt_reg = 0x1054,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x1054,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpu_cc_gx_gfx3d_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &gpu_cc_gx_gfx3d_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gpu_cc_sleep_clk = {
+ .halt_reg = 0x1090,
+ .halt_check = BRANCH_VOTED,
+ .clkr = {
+ .enable_reg = 0x1090,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpu_cc_sleep_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gpu_cc_hlos1_vote_gpu_smmu_clk = {
+ .halt_reg = 0x5000,
+ .halt_check = BRANCH_VOTED,
+ .clkr = {
+ .enable_reg = 0x5000,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpu_cc_hlos1_vote_gpu_smmu_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct gdsc gpu_cx_gdsc = {
+ .gdscr = 0x106c,
+ .gds_hw_ctrl = 0x1540,
+ .pd = {
+ .name = "gpu_cx_gdsc",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+ .flags = VOTABLE,
+};
+
+static struct gdsc gpu_gx_gdsc = {
+ .gdscr = 0x100c,
+ .clamp_io_ctrl = 0x1508,
+ .resets = (unsigned int []){ GPU_GX_BCR },
+ .reset_count = 1,
+ .pd = {
+ .name = "gpu_gx_gdsc",
+ },
+ .parent = &gpu_cx_gdsc.pd,
+ .pwrsts = PWRSTS_OFF_ON,
+ .flags = CLAMP_IO | AON_RESET | SW_RESET,
+};
+
+static struct clk_regmap *gpu_cc_qcm2290_clocks[] = {
+ [GPU_CC_AHB_CLK] = &gpu_cc_ahb_clk.clkr,
+ [GPU_CC_CRC_AHB_CLK] = &gpu_cc_crc_ahb_clk.clkr,
+ [GPU_CC_CX_GFX3D_CLK] = &gpu_cc_cx_gfx3d_clk.clkr,
+ [GPU_CC_CX_GMU_CLK] = &gpu_cc_cx_gmu_clk.clkr,
+ [GPU_CC_CX_SNOC_DVM_CLK] = &gpu_cc_cx_snoc_dvm_clk.clkr,
+ [GPU_CC_CXO_AON_CLK] = &gpu_cc_cxo_aon_clk.clkr,
+ [GPU_CC_CXO_CLK] = &gpu_cc_cxo_clk.clkr,
+ [GPU_CC_GMU_CLK_SRC] = &gpu_cc_gmu_clk_src.clkr,
+ [GPU_CC_GX_GFX3D_CLK] = &gpu_cc_gx_gfx3d_clk.clkr,
+ [GPU_CC_GX_GFX3D_CLK_SRC] = &gpu_cc_gx_gfx3d_clk_src.clkr,
+ [GPU_CC_PLL0] = &gpu_cc_pll0.clkr,
+ [GPU_CC_SLEEP_CLK] = &gpu_cc_sleep_clk.clkr,
+ [GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK] = &gpu_cc_hlos1_vote_gpu_smmu_clk.clkr,
+};
+
+static const struct qcom_reset_map gpu_cc_qcm2290_resets[] = {
+ [GPU_GX_BCR] = { 0x1008 },
+};
+
+static struct gdsc *gpu_cc_qcm2290_gdscs[] = {
+ [GPU_CX_GDSC] = &gpu_cx_gdsc,
+ [GPU_GX_GDSC] = &gpu_gx_gdsc,
+};
+
+static const struct regmap_config gpu_cc_qcm2290_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .max_register = 0x9000,
+ .fast_io = true,
+};
+
+
+static const struct qcom_cc_desc gpu_cc_qcm2290_desc = {
+ .config = &gpu_cc_qcm2290_regmap_config,
+ .clks = gpu_cc_qcm2290_clocks,
+ .num_clks = ARRAY_SIZE(gpu_cc_qcm2290_clocks),
+ .resets = gpu_cc_qcm2290_resets,
+ .num_resets = ARRAY_SIZE(gpu_cc_qcm2290_resets),
+ .gdscs = gpu_cc_qcm2290_gdscs,
+ .num_gdscs = ARRAY_SIZE(gpu_cc_qcm2290_gdscs),
+};
+
+static const struct of_device_id gpu_cc_qcm2290_match_table[] = {
+ { .compatible = "qcom,qcm2290-gpucc" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, gpu_cc_qcm2290_match_table);
+
+static int gpu_cc_qcm2290_probe(struct platform_device *pdev)
+{
+ struct regmap *regmap;
+ int ret;
+
+ regmap = qcom_cc_map(pdev, &gpu_cc_qcm2290_desc);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ ret = devm_pm_runtime_enable(&pdev->dev);
+ if (ret)
+ return ret;
+
+ ret = devm_pm_clk_create(&pdev->dev);
+ if (ret)
+ return ret;
+
+ ret = pm_clk_add(&pdev->dev, NULL);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to acquire ahb clock\n");
+ return ret;
+ }
+
+ ret = pm_runtime_resume_and_get(&pdev->dev);
+ if (ret)
+ return ret;
+
+ clk_huayra_2290_pll_configure(&gpu_cc_pll0, regmap, &gpu_cc_pll0_config);
+
+ regmap_update_bits(regmap, 0x1060, BIT(0), BIT(0)); /* GPU_CC_GX_CXO_CLK */
+
+ ret = qcom_cc_really_probe(pdev, &gpu_cc_qcm2290_desc, regmap);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to register display clock controller\n");
+ goto out_pm_runtime_put;
+ }
+
+out_pm_runtime_put:
+ pm_runtime_put_sync(&pdev->dev);
+
+ return 0;
+}
+
+static struct platform_driver gpu_cc_qcm2290_driver = {
+ .probe = gpu_cc_qcm2290_probe,
+ .driver = {
+ .name = "gpucc-qcm2290",
+ .of_match_table = gpu_cc_qcm2290_match_table,
+ },
+};
+module_platform_driver(gpu_cc_qcm2290_driver);
+
+MODULE_DESCRIPTION("QTI QCM2290 GPU clock controller driver");
+MODULE_LICENSE("GPL");
--
2.43.2
next prev parent reply other threads:[~2024-02-19 13:36 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-19 13:35 [PATCH 0/8] A702 support Konrad Dybcio
2024-02-19 13:35 ` [PATCH 1/8] dt-bindings: arm-smmu: Add QCM2290 GPU SMMU Konrad Dybcio
2024-02-23 0:14 ` Rob Herring
2024-02-19 13:35 ` [PATCH 2/8] dt-bindings: clock: Add Qcom QCM2290 GPUCC Konrad Dybcio
2024-02-19 14:32 ` Rob Herring
2024-02-19 13:35 ` [PATCH 3/8] clk: qcom: clk-alpha-pll: Add HUAYRA_2290 support Konrad Dybcio
2024-02-19 14:53 ` Dmitry Baryshkov
2024-02-19 16:19 ` Konrad Dybcio
2024-02-19 14:54 ` Andrew Halaney
2024-02-19 15:01 ` Konrad Dybcio
2024-02-19 16:24 ` Dmitry Baryshkov
2024-02-19 13:35 ` Konrad Dybcio [this message]
2024-02-19 14:54 ` [PATCH 4/8] clk: qcom: Add QCM2290 GPU clock controller driver Dmitry Baryshkov
2024-02-19 13:35 ` [PATCH 5/8] drm/msm/adreno: Add missing defines for A702 Konrad Dybcio
2024-02-19 13:35 ` [PATCH 6/8] drm/msm/adreno: Add A702 support Konrad Dybcio
2024-02-19 13:35 ` [PATCH 7/8] arm64: dts: qcom: qcm2290: Add GPU nodes Konrad Dybcio
2024-02-19 14:57 ` Dmitry Baryshkov
2024-02-19 13:35 ` [PATCH 8/8] arm64: dts: qcom: qrb2210-rb1: Enable the GPU Konrad Dybcio
2024-02-19 14:49 ` Dmitry Baryshkov
2024-02-19 21:37 ` Konrad Dybcio
2024-02-19 22:16 ` Dmitry Baryshkov
2024-02-20 8:38 ` neil.armstrong
2024-02-22 18:06 ` [PATCH 0/8] A702 support Will Deacon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240219-topic-rb1_gpu-v1-4-d260fa854707@linaro.org \
--to=konrad.dybcio@linaro.org \
--cc=airlied@gmail.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=freedreno@lists.freedesktop.org \
--cc=iommu@lists.linux.dev \
--cc=joro@8bytes.org \
--cc=konradybcio@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marijn.suijten@somainline.org \
--cc=mturquette@baylibre.com \
--cc=quic_abhinavk@quicinc.com \
--cc=robdclark@gmail.com \
--cc=robh@kernel.org \
--cc=robin.murphy@arm.com \
--cc=sboyd@kernel.org \
--cc=sean@poorly.run \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).