devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	Geert Uytterhoeven <geert@linux-m68k.org>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Andy Shevchenko <andy@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Robin van der Gracht <robin@protonic.nl>,
	Paul Burton <paulburton@kernel.org>
Subject: [PATCH v3 9/9] auxdisplay: Add driver for MAX695x 7-segment LED controllers
Date: Mon, 19 Feb 2024 18:58:08 +0200	[thread overview]
Message-ID: <20240219170337.2161754-10-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <20240219170337.2161754-1-andriy.shevchenko@linux.intel.com>

Add initial driver for the MAX6958 and MAX6959 7-segment LED
controllers.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/auxdisplay/Kconfig   |  14 +++
 drivers/auxdisplay/Makefile  |   1 +
 drivers/auxdisplay/max6959.c | 194 +++++++++++++++++++++++++++++++++++
 3 files changed, 209 insertions(+)
 create mode 100644 drivers/auxdisplay/max6959.c

diff --git a/drivers/auxdisplay/Kconfig b/drivers/auxdisplay/Kconfig
index 109ac253d160..bc295ede3c2c 100644
--- a/drivers/auxdisplay/Kconfig
+++ b/drivers/auxdisplay/Kconfig
@@ -59,6 +59,20 @@ config LCD2S
 	  is a simple single color character display. You have to connect it
 	  to an I2C bus.
 
+config MAX6959
+	tristate "Maxim MAX6958/6959 7-segment LED controller"
+	depends on I2C
+	select REGMAP_I2C
+	select LINEDISP
+	help
+	  If you say yes here you get support for the following Maxim chips
+	  (I2C 7-segment LED display controller):
+	  - MAX6958
+	  - MAX6959 (input support)
+
+	  This driver can also be built as a module. If so, the module
+	  will be called max6959.
+
 menuconfig PARPORT_PANEL
 	tristate "Parallel port LCD/Keypad Panel support"
 	depends on PARPORT
diff --git a/drivers/auxdisplay/Makefile b/drivers/auxdisplay/Makefile
index 9197ea34e2d6..9718aedf6ee2 100644
--- a/drivers/auxdisplay/Makefile
+++ b/drivers/auxdisplay/Makefile
@@ -15,5 +15,6 @@ obj-$(CONFIG_CFAG12864B)	+= cfag12864b.o cfag12864bfb.o
 obj-$(CONFIG_LINEDISP)		+= line-display.o
 obj-$(CONFIG_IMG_ASCII_LCD)	+= img-ascii-lcd.o
 obj-$(CONFIG_HT16K33)		+= ht16k33.o
+obj-$(CONFIG_MAX6959)		+= max6959.o
 
 obj-$(CONFIG_ARM_CHARLCD)	+= arm-charlcd.o
diff --git a/drivers/auxdisplay/max6959.c b/drivers/auxdisplay/max6959.c
new file mode 100644
index 000000000000..5519c014bd29
--- /dev/null
+++ b/drivers/auxdisplay/max6959.c
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * MAX6958/6959 7-segment LED display controller
+ * Datasheet:
+ * https://www.analog.com/media/en/technical-documentation/data-sheets/MAX6958-MAX6959.pdf
+ *
+ * Copyright (c) 2024, Intel Corporation.
+ * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+ */
+#include <linux/array_size.h>
+#include <linux/bitrev.h>
+#include <linux/bits.h>
+#include <linux/container_of.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/workqueue.h>
+
+#include <linux/map_to_7segment.h>
+
+#include "line-display.h"
+
+/* Registers */
+#define REG_DECODE_MODE			0x01
+#define REG_INTENSITY			0x02
+#define REG_SCAN_LIMIT			0x03
+#define REG_CONFIGURATION		0x04
+#define REG_CONFIGURATION_S_BIT		BIT(0)
+
+#define REG_DIGIT(x)			(0x20 + (x))
+#define REG_DIGIT0			0x20
+#define REG_DIGIT1			0x21
+#define REG_DIGIT2			0x22
+#define REG_DIGIT3			0x23
+
+#define REG_SEGMENTS			0x24
+#define REG_MAX				REG_SEGMENTS
+
+struct max6959_priv {
+	struct linedisp linedisp;
+	struct delayed_work work;
+	struct regmap *regmap;
+};
+
+static void max6959_disp_update(struct work_struct *work)
+{
+	struct max6959_priv *priv = container_of(work, struct max6959_priv, work.work);
+	struct linedisp *linedisp = &priv->linedisp;
+	struct linedisp_map *map = linedisp->map;
+	char *s = linedisp->buf;
+	u8 buf[4];
+
+	/* Map segments according to datasheet */
+	buf[0] = bitrev8(map_to_seg7(&map->map.seg7, *s++)) >> 1;
+	buf[1] = bitrev8(map_to_seg7(&map->map.seg7, *s++)) >> 1;
+	buf[2] = bitrev8(map_to_seg7(&map->map.seg7, *s++)) >> 1;
+	buf[3] = bitrev8(map_to_seg7(&map->map.seg7, *s++)) >> 1;
+
+	regmap_bulk_write(priv->regmap, REG_DIGIT(0), buf, ARRAY_SIZE(buf));
+}
+
+static int max6959_linedisp_get_map_type(struct linedisp *linedisp)
+{
+	struct max6959_priv *priv = container_of(linedisp, struct max6959_priv, linedisp);
+
+	INIT_DELAYED_WORK(&priv->work, max6959_disp_update);
+	return LINEDISP_MAP_SEG7;
+}
+
+static void max6959_linedisp_update(struct linedisp *linedisp)
+{
+	struct max6959_priv *priv = container_of(linedisp, struct max6959_priv, linedisp);
+
+	schedule_delayed_work(&priv->work, 0);
+}
+
+static const struct linedisp_ops max6959_linedisp_ops = {
+	.get_map_type = max6959_linedisp_get_map_type,
+	.update = max6959_linedisp_update,
+};
+
+static int max6959_enable(struct max6959_priv *priv, bool enable)
+{
+	u8 mask = REG_CONFIGURATION_S_BIT;
+	u8 value = enable ? mask : 0;
+
+	return regmap_update_bits(priv->regmap, REG_CONFIGURATION, mask, value);
+}
+
+static void max6959_power_off(void *priv)
+{
+	max6959_enable(priv, false);
+}
+
+static int max6959_power_on(struct max6959_priv *priv)
+{
+	struct device *dev = regmap_get_device(priv->regmap);
+	int ret;
+
+	ret = max6959_enable(priv, true);
+	if (ret)
+		return ret;
+
+	return devm_add_action_or_reset(dev, max6959_power_off, priv);
+}
+
+static const struct regmap_config max6959_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = REG_MAX,
+	.cache_type = REGCACHE_MAPLE,
+};
+
+static int max6959_i2c_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct max6959_priv *priv;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->regmap = devm_regmap_init_i2c(client, &max6959_regmap_config);
+	if (IS_ERR(priv->regmap))
+		return PTR_ERR(priv->regmap);
+
+	ret = max6959_power_on(priv);
+	if (ret)
+		return ret;
+
+	ret = linedisp_register(&priv->linedisp, dev, 4, &max6959_linedisp_ops);
+	if (ret)
+		return ret;
+
+	i2c_set_clientdata(client, priv);
+
+	return 0;
+}
+
+static void max6959_i2c_remove(struct i2c_client *client)
+{
+	struct max6959_priv *priv = i2c_get_clientdata(client);
+
+	cancel_delayed_work_sync(&priv->work);
+	linedisp_unregister(&priv->linedisp);
+}
+
+static int max6959_suspend(struct device *dev)
+{
+	return max6959_enable(dev_get_drvdata(dev), false);
+}
+
+static int max6959_resume(struct device *dev)
+{
+	return max6959_enable(dev_get_drvdata(dev), true);
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(max6959_pm_ops, max6959_suspend, max6959_resume);
+
+static const struct i2c_device_id max6959_i2c_id[] = {
+	{ "max6959" },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, max6959_i2c_id);
+
+static const struct of_device_id max6959_of_table[] = {
+	{ .compatible = "maxim,max6959" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, max6959_of_table);
+
+static struct i2c_driver max6959_i2c_driver = {
+	.driver = {
+		.name = "max6959",
+		.pm = pm_sleep_ptr(&max6959_pm_ops),
+		.of_match_table = max6959_of_table,
+	},
+	.probe = max6959_i2c_probe,
+	.remove = max6959_i2c_remove,
+	.id_table = max6959_i2c_id,
+};
+module_i2c_driver(max6959_i2c_driver);
+
+MODULE_DESCRIPTION("MAX6958/6959 7-segment LED controller");
+MODULE_AUTHOR("Andy Shevchenko <andriy.shevchenko@linux.intel.com>");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(LINEDISP);
-- 
2.43.0.rc1.1.gbec44491f096


  parent reply	other threads:[~2024-02-19 17:03 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-19 16:57 [PATCH v3 0/9] auxdisplay: linedisp: Clean up and add new driver Andy Shevchenko
2024-02-19 16:58 ` [PATCH v3 1/9] auxdisplay: linedisp: Group display drivers together Andy Shevchenko
2024-02-26 15:28   ` Geert Uytterhoeven
2024-02-26 16:00     ` Andy Shevchenko
2024-02-26 16:03       ` Geert Uytterhoeven
2024-02-26 16:15         ` Andy Shevchenko
2024-02-19 16:58 ` [PATCH v3 2/9] auxdisplay: linedisp: Allocate buffer for the string Andy Shevchenko
2024-02-26 15:36   ` Geert Uytterhoeven
2024-02-19 16:58 ` [PATCH v3 3/9] auxdisplay: ht16k33: Add default to switch-cases Andy Shevchenko
2024-02-26 15:38   ` Geert Uytterhoeven
2024-02-19 16:58 ` [PATCH v3 4/9] auxdisplay: ht16k33: Move ht16k33_linedisp_ops down Andy Shevchenko
2024-02-19 16:58 ` [PATCH v3 5/9] auxdisplay: ht16k33: Define a few helper macros Andy Shevchenko
2024-02-20 18:05   ` Andy Shevchenko
2024-02-26 15:40     ` Geert Uytterhoeven
2024-02-19 16:58 ` [PATCH v3 6/9] auxdisplay: ht16k33: Switch to use line display character mapping Andy Shevchenko
2024-02-19 16:58 ` [PATCH v3 7/9] auxdisplay: ht16k33: Drop struct ht16k33_seg Andy Shevchenko
2024-02-26 15:44   ` Geert Uytterhoeven
2024-02-19 16:58 ` [PATCH v3 8/9] dt-bindings: auxdisplay: Add Maxim MAX6958/6959 Andy Shevchenko
2024-02-26 15:52   ` Geert Uytterhoeven
2024-02-26 17:03     ` Andy Shevchenko
2024-02-19 16:58 ` Andy Shevchenko [this message]
2024-02-26 16:01   ` [PATCH v3 9/9] auxdisplay: Add driver for MAX695x 7-segment LED controllers Geert Uytterhoeven
2024-02-26 16:17     ` Andy Shevchenko
2024-02-26 16:58       ` Geert Uytterhoeven
2024-02-26 17:04     ` Andy Shevchenko
2024-02-22 13:51 ` [PATCH v3 0/9] auxdisplay: linedisp: Clean up and add new driver Andy Shevchenko
2024-02-22 13:56   ` Geert Uytterhoeven
2024-02-26 14:30     ` Andy Shevchenko
2024-02-26 16:24     ` Andy Shevchenko
2024-02-26 18:00       ` Andy Shevchenko
2024-02-26 18:13         ` Geert Uytterhoeven

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240219170337.2161754-10-andriy.shevchenko@linux.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=andy@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=geert@linux-m68k.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=krzysztof.kozlowski@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=paulburton@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=robin@protonic.nl \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).