From: Frank Li <Frank.Li@nxp.com>
To: lpieralisi@kernel.org
Cc: Frank.li@nxp.com, bhelgaas@google.com, cassel@kernel.org,
conor+dt@kernel.org, devicetree@vger.kernel.org,
festevam@gmail.com, helgaas@kernel.org, hongxing.zhu@nxp.com,
imx@lists.linux.dev, kernel@pengutronix.de,
krzysztof.kozlowski+dt@linaro.org,
krzysztof.kozlowski@linaro.org, kw@linux.com,
l.stach@pengutronix.de, linux-arm-kernel@lists.infradead.org,
linux-imx@nxp.com, linux-kernel@vger.kernel.org,
linux-pci@vger.kernel.org, manivannan.sadhasivam@linaro.org,
robh@kernel.org, s.hauer@pengutronix.de, shawnguo@kernel.org
Subject: [PATCH v11 06/14] PCI: imx6: Simplify switch-case logic by involve init_phy callback
Date: Tue, 20 Feb 2024 11:19:16 -0500 [thread overview]
Message-ID: <20240220161924.3871774-7-Frank.Li@nxp.com> (raw)
In-Reply-To: <20240220161924.3871774-1-Frank.Li@nxp.com>
Instead of using the switch case statement to initialize the PHY handled by
this driver itself, let's introduce a new callback init_phy() and define it
for platforms that require it. This simplifies the code.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
Notes:
Change from v7 to v8:
- rework commit message
- wrap comments to 100 chars
- return 0 at imx7d_pcie_init_phy()
change from v1 to v4:
- none
drivers/pci/controller/dwc/pci-imx6.c | 134 +++++++++++++-------------
1 file changed, 69 insertions(+), 65 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 6dcff345939e9..71ce6b7ac1de0 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -69,6 +69,9 @@ enum imx6_pcie_variants {
#define IMX6_PCIE_MAX_CLKS 6
#define IMX6_PCIE_MAX_INSTANCES 2
+
+struct imx6_pcie;
+
struct imx6_pcie_drvdata {
enum imx6_pcie_variants variant;
enum dw_pcie_device_mode mode;
@@ -81,6 +84,7 @@ struct imx6_pcie_drvdata {
const u32 ltssm_mask;
const u32 mode_off[IMX6_PCIE_MAX_INSTANCES];
const u32 mode_mask[IMX6_PCIE_MAX_INSTANCES];
+ int (*init_phy)(struct imx6_pcie *pcie);
};
struct imx6_pcie {
@@ -322,76 +326,66 @@ static int pcie_phy_write(struct imx6_pcie *imx6_pcie, int addr, u16 data)
return 0;
}
-static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie)
+static int imx8mq_pcie_init_phy(struct imx6_pcie *imx6_pcie)
{
- switch (imx6_pcie->drvdata->variant) {
- case IMX8MM:
- case IMX8MM_EP:
- case IMX8MP:
- case IMX8MP_EP:
- /*
- * The PHY initialization had been done in the PHY
- * driver, break here directly.
- */
- break;
- case IMX8MQ:
- case IMX8MQ_EP:
- /*
- * TODO: Currently this code assumes external
- * oscillator is being used
- */
+ /* TODO: Currently this code assumes external oscillator is being used */
+ regmap_update_bits(imx6_pcie->iomuxc_gpr,
+ imx6_pcie_grp_offset(imx6_pcie),
+ IMX8MQ_GPR_PCIE_REF_USE_PAD,
+ IMX8MQ_GPR_PCIE_REF_USE_PAD);
+ /*
+ * Regarding the datasheet, the PCIE_VPH is suggested to be 1.8V. If the PCIE_VPH is
+ * supplied by 3.3V, the VREG_BYPASS should be cleared to zero.
+ */
+ if (imx6_pcie->vph && regulator_get_voltage(imx6_pcie->vph) > 3000000)
regmap_update_bits(imx6_pcie->iomuxc_gpr,
imx6_pcie_grp_offset(imx6_pcie),
- IMX8MQ_GPR_PCIE_REF_USE_PAD,
- IMX8MQ_GPR_PCIE_REF_USE_PAD);
- /*
- * Regarding the datasheet, the PCIE_VPH is suggested
- * to be 1.8V. If the PCIE_VPH is supplied by 3.3V, the
- * VREG_BYPASS should be cleared to zero.
- */
- if (imx6_pcie->vph &&
- regulator_get_voltage(imx6_pcie->vph) > 3000000)
- regmap_update_bits(imx6_pcie->iomuxc_gpr,
- imx6_pcie_grp_offset(imx6_pcie),
- IMX8MQ_GPR_PCIE_VREG_BYPASS,
- 0);
- break;
- case IMX7D:
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
- IMX7D_GPR12_PCIE_PHY_REFCLK_SEL, 0);
- break;
- case IMX6SX:
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
- IMX6SX_GPR12_PCIE_RX_EQ_MASK,
- IMX6SX_GPR12_PCIE_RX_EQ_2);
- fallthrough;
- default:
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+ IMX8MQ_GPR_PCIE_VREG_BYPASS,
+ 0);
+
+ return 0;
+}
+
+static int imx7d_pcie_init_phy(struct imx6_pcie *imx6_pcie)
+{
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, IMX7D_GPR12_PCIE_PHY_REFCLK_SEL, 0);
+
+ return 0;
+}
+
+static int imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie)
+{
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
IMX6Q_GPR12_PCIE_CTL_2, 0 << 10);
- /* configure constant input signal to the pcie ctrl and phy */
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
- IMX6Q_GPR12_LOS_LEVEL, 9 << 4);
-
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
- IMX6Q_GPR8_TX_DEEMPH_GEN1,
- imx6_pcie->tx_deemph_gen1 << 0);
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
- IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB,
- imx6_pcie->tx_deemph_gen2_3p5db << 6);
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
- IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB,
- imx6_pcie->tx_deemph_gen2_6db << 12);
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
- IMX6Q_GPR8_TX_SWING_FULL,
- imx6_pcie->tx_swing_full << 18);
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
- IMX6Q_GPR8_TX_SWING_LOW,
- imx6_pcie->tx_swing_low << 25);
- break;
- }
+ /* configure constant input signal to the pcie ctrl and phy */
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+ IMX6Q_GPR12_LOS_LEVEL, 9 << 4);
+
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
+ IMX6Q_GPR8_TX_DEEMPH_GEN1,
+ imx6_pcie->tx_deemph_gen1 << 0);
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
+ IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB,
+ imx6_pcie->tx_deemph_gen2_3p5db << 6);
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
+ IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB,
+ imx6_pcie->tx_deemph_gen2_6db << 12);
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
+ IMX6Q_GPR8_TX_SWING_FULL,
+ imx6_pcie->tx_swing_full << 18);
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
+ IMX6Q_GPR8_TX_SWING_LOW,
+ imx6_pcie->tx_swing_low << 25);
+ return 0;
+}
- imx6_pcie_configure_type(imx6_pcie);
+static int imx6sx_pcie_init_phy(struct imx6_pcie *imx6_pcie)
+{
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+ IMX6SX_GPR12_PCIE_RX_EQ_MASK, IMX6SX_GPR12_PCIE_RX_EQ_2);
+
+ return imx6_pcie_init_phy(imx6_pcie);
}
static void imx7d_pcie_wait_for_phy_pll_lock(struct imx6_pcie *imx6_pcie)
@@ -902,7 +896,11 @@ static int imx6_pcie_host_init(struct dw_pcie_rp *pp)
}
imx6_pcie_assert_core_reset(imx6_pcie);
- imx6_pcie_init_phy(imx6_pcie);
+
+ if (imx6_pcie->drvdata->init_phy)
+ imx6_pcie->drvdata->init_phy(imx6_pcie);
+
+ imx6_pcie_configure_type(imx6_pcie);
ret = imx6_pcie_clk_enable(imx6_pcie);
if (ret) {
@@ -1381,6 +1379,7 @@ static const struct imx6_pcie_drvdata drvdata[] = {
.ltssm_mask = IMX6Q_GPR12_PCIE_CTL_2,
.mode_off[0] = IOMUXC_GPR12,
.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
+ .init_phy = imx6_pcie_init_phy,
},
[IMX6SX] = {
.variant = IMX6SX,
@@ -1394,6 +1393,7 @@ static const struct imx6_pcie_drvdata drvdata[] = {
.ltssm_mask = IMX6Q_GPR12_PCIE_CTL_2,
.mode_off[0] = IOMUXC_GPR12,
.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
+ .init_phy = imx6sx_pcie_init_phy,
},
[IMX6QP] = {
.variant = IMX6QP,
@@ -1408,6 +1408,7 @@ static const struct imx6_pcie_drvdata drvdata[] = {
.ltssm_mask = IMX6Q_GPR12_PCIE_CTL_2,
.mode_off[0] = IOMUXC_GPR12,
.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
+ .init_phy = imx6_pcie_init_phy,
},
[IMX7D] = {
.variant = IMX7D,
@@ -1419,6 +1420,7 @@ static const struct imx6_pcie_drvdata drvdata[] = {
.clks_cnt = ARRAY_SIZE(imx6q_clks),
.mode_off[0] = IOMUXC_GPR12,
.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
+ .init_phy = imx7d_pcie_init_phy,
},
[IMX8MQ] = {
.variant = IMX8MQ,
@@ -1431,6 +1433,7 @@ static const struct imx6_pcie_drvdata drvdata[] = {
.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
.mode_off[1] = IOMUXC_GPR12,
.mode_mask[1] = IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE,
+ .init_phy = imx8mq_pcie_init_phy,
},
[IMX8MM] = {
.variant = IMX8MM,
@@ -1466,6 +1469,7 @@ static const struct imx6_pcie_drvdata drvdata[] = {
.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
.mode_off[1] = IOMUXC_GPR12,
.mode_mask[1] = IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE,
+ .init_phy = imx8mq_pcie_init_phy,
},
[IMX8MM_EP] = {
.variant = IMX8MM_EP,
--
2.34.1
next prev parent reply other threads:[~2024-02-20 16:20 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-20 16:19 [PATCH v11 00/14] PCI: imx6: Clean up and add imx95 pci support Frank Li
2024-02-20 16:19 ` [PATCH v11 01/14] PCI: imx6: Simplify clock handling by using clk_bulk*() function Frank Li
2024-02-20 16:19 ` [PATCH v11 02/14] PCI: imx6: Simplify phy handling by using IMX6_PCIE_FLAG_HAS_PHYDRV Frank Li
2024-02-20 16:19 ` [PATCH v11 03/14] PCI: imx6: Simplify reset handling by using by using *_FLAG_HAS_*_RESET Frank Li
2024-02-20 16:19 ` [PATCH v11 04/14] PCI: imx6: Simplify ltssm_enable() by using ltssm_off and ltssm_mask Frank Li
2024-02-20 16:19 ` [PATCH v11 05/14] PCI: imx6: Simplify configure_type() by using mode_off and mode_mask Frank Li
2024-02-20 16:19 ` Frank Li [this message]
2024-02-20 16:19 ` [PATCH v11 07/14] dt-bindings: imx6q-pcie: Clean up irrationality clocks check Frank Li
2024-02-21 10:49 ` Lorenzo Pieralisi
2024-02-21 15:33 ` Frank Li
2024-02-20 16:19 ` [PATCH v11 08/14] dt-bindings: imx6q-pcie: Restruct reg and reg-name Frank Li
2024-02-20 16:19 ` [PATCH v11 09/14] dt-bindings: imx6q-pcie: Add imx95 pcie compatible string Frank Li
2024-02-20 16:19 ` [PATCH v11 10/14] PCI: imx6: Add iMX95 PCIe Root Complex support Frank Li
2024-02-21 10:42 ` Lorenzo Pieralisi
2024-02-21 15:36 ` Frank Li
2024-02-20 16:19 ` [PATCH v11 11/14] PCI: imx6: Clean up get addr_space code Frank Li
2024-02-20 16:19 ` [PATCH v11 12/14] PCI: imx6: Add epc_features in imx6_pcie_drvdata Frank Li
2024-02-20 16:19 ` [PATCH v11 13/14] dt-bindings: imx6q-pcie: Add iMX95 pcie endpoint compatible string Frank Li
2024-02-20 16:19 ` [PATCH v11 14/14] PCI: imx6: Add iMX95 Endpoint (EP) support Frank Li
2024-02-23 15:23 ` [PATCH v11 00/14] PCI: imx6: Clean up and add imx95 pci support Lorenzo Pieralisi
2024-02-23 15:30 ` Lorenzo Pieralisi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240220161924.3871774-7-Frank.Li@nxp.com \
--to=frank.li@nxp.com \
--cc=bhelgaas@google.com \
--cc=cassel@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=helgaas@kernel.org \
--cc=hongxing.zhu@nxp.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=kw@linux.com \
--cc=l.stach@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).