From: "Rafał Miłecki" <zajec5@gmail.com>
To: Matthias Brugger <matthias.bgg@gmail.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org,
"Rafał Miłecki" <rafal@milecki.pl>
Subject: [PATCH] arm64: dts: mediatek: mt7981: add watchdog & WiFi controllers
Date: Wed, 21 Feb 2024 09:55:47 +0100 [thread overview]
Message-ID: <20240221085547.27840-1-zajec5@gmail.com> (raw)
From: Rafał Miłecki <rafal@milecki.pl>
MT7981 (Filogic 820) is a low cost version of MT7986 (Filogic 830) with
the same watchdog controller. It also comes with on-SoC 802.11ax
wireless.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
arch/arm64/boot/dts/mediatek/mt7981b.dtsi | 26 ++++++++++++++++++++++-
1 file changed, 25 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt7981b.dtsi b/arch/arm64/boot/dts/mediatek/mt7981b.dtsi
index 2f89b18bab17..0dc49c47dfc2 100644
--- a/arch/arm64/boot/dts/mediatek/mt7981b.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7981b.dtsi
@@ -2,6 +2,7 @@
#include <dt-bindings/clock/mediatek,mt7981-clk.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/mt7986-resets.h>
/ {
compatible = "mediatek,mt7981b";
@@ -62,12 +63,19 @@ infracfg: clock-controller@10001000 {
#clock-cells = <1>;
};
- clock-controller@1001b000 {
+ topckgen: clock-controller@1001b000 {
compatible = "mediatek,mt7981-topckgen", "syscon";
reg = <0 0x1001b000 0 0x1000>;
#clock-cells = <1>;
};
+ watchdog: watchdog@1001c000 {
+ compatible = "mediatek,mt7986-wdt";
+ reg = <0 0x1001c000 0 0x1000>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ #reset-cells = <1>;
+ };
+
clock-controller@1001e000 {
compatible = "mediatek,mt7981-apmixedsys";
reg = <0 0x1001e000 0 0x1000>;
@@ -142,6 +150,22 @@ clock-controller@15000000 {
#clock-cells = <1>;
#reset-cells = <1>;
};
+
+ wifi@18000000 {
+ compatible = "mediatek,mt7981-wmac";
+ reg = <0 0x18000000 0 0x1000000>,
+ <0 0x10003000 0 0x1000>,
+ <0 0x11d10000 0 0x1000>;
+ interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&topckgen CLK_TOP_NETSYS_MCU_SEL>,
+ <&topckgen CLK_TOP_AP2CNN_HOST_SEL>;
+ clock-names = "mcu", "ap2conn";
+ resets = <&watchdog MT7986_TOPRGU_CONSYS_SW_RST>;
+ reset-names = "consys";
+ };
};
timer {
--
2.35.3
next reply other threads:[~2024-02-21 8:55 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-21 8:55 Rafał Miłecki [this message]
2024-02-21 10:15 ` [PATCH] arm64: dts: mediatek: mt7981: add watchdog & WiFi controllers AngeloGioacchino Del Regno
2024-04-05 8:02 ` AngeloGioacchino Del Regno
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240221085547.27840-1-zajec5@gmail.com \
--to=zajec5@gmail.com \
--cc=angelogioacchino.delregno@collabora.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=rafal@milecki.pl \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox