[PATCH v3 4/4] arm64: dts: qcom: x1e80100-qcp: Add repeater nodes

[Abel Vesa <abel.vesa@linaro.org>]

Include the PMIC dedicated file and add regulators to each one of
those 3 eUSB2 repeaters. Tie up the repeaters to their corresponding
USB HS PHY.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
 arch/arm64/boot/dts/qcom/x1e80100-qcp.dts | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
index e76d29053d79..35580ac3430d 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
@@ -9,6 +9,7 @@
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 
 #include "x1e80100.dtsi"
+#include "x1e80100-pmics.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. X1E80100 QCP";
@@ -491,6 +492,21 @@ &remoteproc_cdsp {
 	status = "okay";
 };
 
+&smb2360_0_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l2b_3p0>;
+};
+
+&smb2360_1_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l14b_3p0>;
+};
+
+&smb2360_2_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l8b_3p0>;
+};
+
 &tlmm {
 	gpio-reserved-ranges = <33 3>, /* Unused */
 			       <44 4>, /* SPI (TPM) */
@@ -513,6 +529,8 @@ &usb_1_ss0_hsphy {
 	vdd-supply = <&vreg_l2e_0p8>;
 	vdda12-supply = <&vreg_l3e_1p2>;
 
+	phys = <&smb2360_0_eusb2_repeater>;
+
 	status = "okay";
 };
 
@@ -533,6 +551,8 @@ &usb_1_ss1_hsphy {
 	vdd-supply = <&vreg_l2e_0p8>;
 	vdda12-supply = <&vreg_l3e_1p2>;
 
+	phys = <&smb2360_1_eusb2_repeater>;
+
 	status = "okay";
 };
 
@@ -553,6 +573,8 @@ &usb_1_ss2_hsphy {
 	vdd-supply = <&vreg_l2e_0p8>;
 	vdda12-supply = <&vreg_l3e_1p2>;
 
+	phys = <&smb2360_2_eusb2_repeater>;
+
 	status = "okay";
 };
 

-- 
2.34.1