From: Sebastian Reichel <sre@kernel.org>
To: Sebastian Reichel <sre@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
NXP Linux Team <linux-imx@nxp.com>
Cc: Dong Aisheng <aisheng.dong@nxp.com>,
Linus Walleij <linus.walleij@linaro.org>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Mark Brown <broonie@kernel.org>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH v4 11/16] ARM: dts: nxp: imx6ul: xnur-gpio -> xnur-gpios
Date: Sat, 24 Feb 2024 22:29:43 +0100 [thread overview]
Message-ID: <20240224213240.1854709-12-sre@kernel.org> (raw)
In-Reply-To: <20240224213240.1854709-1-sre@kernel.org>
Replace all "xnur-gpio" with "xnur-gpios" in the i.MX6UL(L) Touchscreen
node, since the -gpio suffix is deprecated. All known implementations of
this binding can handle -gpio and -gpios since day 1, so this should be
fully backwards compatible.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
---
arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi | 2 +-
arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts | 2 +-
arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi | 2 +-
arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som.dtsi | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi
index 2ac40d69425b..f10f0525490b 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi
@@ -321,7 +321,7 @@ &snvs_pwrkey {
&tsc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tsc>;
- xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+ xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
measure-delay-time = <0xffff>;
pre-charge-time = <0xfff>;
status = "okay";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts
index 875ae699c5cb..2ca18f3dad0a 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts
@@ -203,7 +203,7 @@ &pwm8 {
&tsc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tsc>;
- xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+ xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
};
&sai2 {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi
index 18cac19aa9b0..af337f18a266 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi
@@ -156,7 +156,7 @@ &snvs_pwrkey {
&tsc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tsc>;
- xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+ xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
measure-delay-time = <0xffff>;
pre-charge-time = <0xffff>;
status = "okay";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som.dtsi
index 830b5a5064f2..6d2163250b5d 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som.dtsi
@@ -273,7 +273,7 @@ &tsc {
pinctrl-names = "default";
pre-charge-time = <0xfff>;
touchscreen-average-samples = <32>;
- xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+ xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
};
/* DHCOM UART1 */
--
2.43.0
next prev parent reply other threads:[~2024-02-24 21:33 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-24 21:29 [PATCH v4 00/16] UNI-T UTi260B support Sebastian Reichel
2024-02-24 21:29 ` [PATCH v4 01/16] dt-bindings: pinctrl: fsl,imx6ul-pinctrl: convert to YAML Sebastian Reichel
2024-02-24 21:29 ` [PATCH v4 02/16] dt-bindings: bus: imx-weim: " Sebastian Reichel
2024-02-26 7:25 ` (subset) " Krzysztof Kozlowski
2024-02-24 21:29 ` [PATCH v4 03/16] dt-bindings: input: touchscreen: fsl,imx6ul-tsc " Sebastian Reichel
2024-02-24 21:29 ` [PATCH v4 04/16] dt-bindings: soc: imx: fsl,imx-anatop: add binding Sebastian Reichel
2024-02-24 21:29 ` [PATCH v4 05/16] dt-bindings: soc: imx: fsl,imx-iomuxc-gpr: add imx6 Sebastian Reichel
2024-02-24 21:29 ` [PATCH v4 06/16] dt-bindings: lcdif: Do not require power-domains for i.MX6ULL Sebastian Reichel
2024-02-25 1:05 ` Fabio Estevam
2024-02-26 14:55 ` Rob Herring
2024-02-24 21:29 ` [PATCH v4 07/16] dt-bindings: fsl-imx-sdma: fix HDMI audio index Sebastian Reichel
2024-02-24 21:29 ` [PATCH v4 08/16] ARM: dts: imx6ull: fix pinctrl node name Sebastian Reichel
2024-02-25 13:54 ` Shawn Guo
2024-02-24 21:29 ` [PATCH v4 09/16] ARM: dts: imx6ul: Remove fsl,anatop from usbotg1 Sebastian Reichel
2024-02-25 13:55 ` Shawn Guo
2024-02-24 21:29 ` [PATCH v4 10/16] ARM: dts: imx6ul: add missing #thermal-sensor-cells Sebastian Reichel
2024-02-25 13:53 ` Shawn Guo
2024-02-24 21:29 ` Sebastian Reichel [this message]
2024-02-25 13:55 ` [PATCH v4 11/16] ARM: dts: nxp: imx6ul: xnur-gpio -> xnur-gpios Shawn Guo
2024-02-24 21:29 ` [PATCH v4 12/16] ARM: dts: nxp: imx6ul: fix touchscreen node name Sebastian Reichel
2024-02-25 13:56 ` Shawn Guo
2024-02-24 21:29 ` [PATCH v4 13/16] ARM: dts: nxp: imx: fix weim " Sebastian Reichel
2024-02-25 13:56 ` Shawn Guo
2024-02-24 21:29 ` [PATCH v4 14/16] dt-bindings: vendor-prefixes: add UNI-T Sebastian Reichel
2024-02-25 13:57 ` Shawn Guo
2024-02-24 21:29 ` [PATCH v4 15/16] dt-bindings: arm: add UNI-T UTi260B Sebastian Reichel
2024-02-25 13:57 ` Shawn Guo
2024-02-24 21:29 ` [PATCH v4 16/16] ARM: dts: imx6ull-uti260b: Add board Sebastian Reichel
2024-02-25 1:11 ` Fabio Estevam
2024-02-25 14:15 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240224213240.1854709-12-sre@kernel.org \
--to=sre@kernel.org \
--cc=aisheng.dong@nxp.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).