devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Eddie James <eajames@linux.ibm.com>
To: linux-fsi@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org, linux-i2c@vger.kernel.org,
	devicetree@vger.kernel.org, andi.shyti@kernel.org,
	eajames@linux.ibm.com, alistair@popple.id.au, joel@jms.id.au,
	jk@ozlabs.org, robh@kernel.org,
	krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org,
	lakshmiy@us.ibmcom
Subject: [PATCH v2 19/31] fsi: aspeed: Switch to spinlock
Date: Mon, 26 Feb 2024 10:53:09 -0600	[thread overview]
Message-ID: <20240226165321.91976-20-eajames@linux.ibm.com> (raw)
In-Reply-To: <20240226165321.91976-1-eajames@linux.ibm.com>

In preparation for interrupt support, switch to a spinlock rather
than a mutex.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
 drivers/fsi/fsi-master-aspeed.c | 25 ++++++++++++++-----------
 1 file changed, 14 insertions(+), 11 deletions(-)

diff --git a/drivers/fsi/fsi-master-aspeed.c b/drivers/fsi/fsi-master-aspeed.c
index 83f84ee6d6f4..1cb5bf6c05d2 100644
--- a/drivers/fsi/fsi-master-aspeed.c
+++ b/drivers/fsi/fsi-master-aspeed.c
@@ -8,11 +8,11 @@
 #include <linux/io.h>
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
-#include <linux/mutex.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
+#include <linux/spinlock.h>
 #include <linux/iopoll.h>
 #include <linux/gpio/consumer.h>
 
@@ -24,7 +24,7 @@ struct fsi_master_aspeed_data {
 
 struct fsi_master_aspeed {
 	struct fsi_master	master;
-	struct mutex		lock;	/* protect HW access */
+	spinlock_t		lock;	/* protect HW access */
 	struct device		*dev;
 	void __iomem		*base;
 	struct clk		*clk;
@@ -245,6 +245,7 @@ static int aspeed_master_read(struct fsi_master *master, int link,
 			uint8_t id, uint32_t addr, void *val, size_t size)
 {
 	struct fsi_master_aspeed *aspeed = to_fsi_master_aspeed(master);
+	unsigned long flags;
 	int ret;
 
 	if (id > 0x3)
@@ -253,7 +254,7 @@ static int aspeed_master_read(struct fsi_master *master, int link,
 	addr |= id << 21;
 	addr += link * FSI_HUB_LINK_SIZE;
 
-	mutex_lock(&aspeed->lock);
+	spin_lock_irqsave(&aspeed->lock, flags);
 
 	switch (size) {
 	case 1:
@@ -272,7 +273,7 @@ static int aspeed_master_read(struct fsi_master *master, int link,
 
 	ret = check_errors(aspeed, ret);
 done:
-	mutex_unlock(&aspeed->lock);
+	spin_unlock_irqrestore(&aspeed->lock, flags);
 	return ret;
 }
 
@@ -280,6 +281,7 @@ static int aspeed_master_write(struct fsi_master *master, int link,
 			uint8_t id, uint32_t addr, const void *val, size_t size)
 {
 	struct fsi_master_aspeed *aspeed = to_fsi_master_aspeed(master);
+	unsigned long flags;
 	int ret;
 
 	if (id > 0x3)
@@ -288,7 +290,7 @@ static int aspeed_master_write(struct fsi_master *master, int link,
 	addr |= id << 21;
 	addr += link * FSI_HUB_LINK_SIZE;
 
-	mutex_lock(&aspeed->lock);
+	spin_lock_irqsave(&aspeed->lock, flags);
 
 	switch (size) {
 	case 1:
@@ -307,7 +309,7 @@ static int aspeed_master_write(struct fsi_master *master, int link,
 
 	ret = check_errors(aspeed, ret);
 done:
-	mutex_unlock(&aspeed->lock);
+	spin_unlock_irqrestore(&aspeed->lock, flags);
 	return ret;
 }
 
@@ -369,15 +371,16 @@ static ssize_t cfam_reset_store(struct device *dev, struct device_attribute *att
 				const char *buf, size_t count)
 {
 	struct fsi_master_aspeed *aspeed = dev_get_drvdata(dev);
+	unsigned long flags;
 
 	trace_fsi_master_aspeed_cfam_reset(true);
-	mutex_lock(&aspeed->lock);
+	spin_lock_irqsave(&aspeed->lock, flags);
 	gpiod_set_value(aspeed->cfam_reset_gpio, 1);
-	usleep_range(900, 1000);
+	udelay(900);
 	gpiod_set_value(aspeed->cfam_reset_gpio, 0);
-	usleep_range(900, 1000);
+	udelay(900);
 	opb_writel(aspeed, ctrl_base + FSI_MRESP0, cpu_to_be32(FSI_MRESP_RST_ALL_MASTER));
-	mutex_unlock(&aspeed->lock);
+	spin_unlock_irqrestore(&aspeed->lock, flags);
 	trace_fsi_master_aspeed_cfam_reset(false);
 
 	return count;
@@ -468,6 +471,7 @@ static int fsi_master_aspeed_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	aspeed->dev = &pdev->dev;
+	spin_lock_init(&aspeed->lock);
 
 	aspeed->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(aspeed->base)) {
@@ -543,7 +547,6 @@ static int fsi_master_aspeed_probe(struct platform_device *pdev)
 
 	dev_set_drvdata(&pdev->dev, aspeed);
 
-	mutex_init(&aspeed->lock);
 	rc = fsi_master_init(&aspeed->master, clk_get_rate(aspeed->clk));
 	if (rc)
 		goto err_regmap;
-- 
2.39.3


  parent reply	other threads:[~2024-02-26 16:53 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-26 16:52 [PATCH v2 00/31] fsi: Interrupt support Eddie James
2024-02-26 16:52 ` [PATCH v2 01/31] fsi: Move slave definitions to fsi-slave.h Eddie James
2024-02-26 16:52 ` [PATCH v2 02/31] fsi: Improve master indexing Eddie James
2024-02-26 16:52 ` [PATCH v2 03/31] fsi: Use a defined value for default echo delay Eddie James
2024-02-26 16:52 ` [PATCH v2 04/31] fsi: Expose master-specific local bus clock divider Eddie James
2024-02-26 16:52 ` [PATCH v2 05/31] ARM: dts: aspeed: p10 and tacoma: Set FSI clock frequency Eddie James
2024-02-26 16:52 ` [PATCH v2 06/31] fsi: core: Improve master read/write/error traces Eddie James
2024-02-26 16:52 ` [PATCH v2 07/31] fsi: core: Add slave error trace Eddie James
2024-02-26 16:52 ` [PATCH v2 08/31] dt-bindings: fsi: Add AST2700 compatible Eddie James
2024-02-27  7:14   ` Krzysztof Kozlowski
2024-02-28 15:47   ` Rob Herring
2024-02-26 16:52 ` [PATCH v2 09/31] fsi: aspeed: Add AST2700 support Eddie James
2024-02-26 16:53 ` [PATCH v2 10/31] fsi: core: Add slave spinlock Eddie James
2024-02-26 16:53 ` [PATCH v2 11/31] fsi: core: Allow cfam device type aliases Eddie James
2024-02-26 16:53 ` [PATCH v2 12/31] fsi: core: Add common regmap master functions Eddie James
2024-02-26 16:53 ` [PATCH v2 13/31] fsi: hub: Use common initialization and link enable Eddie James
2024-02-26 16:53 ` [PATCH v2 14/31] fsi: aspeed: " Eddie James
2024-02-26 16:53 ` [PATCH v2 15/31] fsi: aspeed: Remove cfam reset sysfs file in error path and remove Eddie James
2024-02-26 16:53 ` [PATCH v2 16/31] fsi: aspeed: Refactor trace functions Eddie James
2024-02-26 16:53 ` [PATCH v2 17/31] fsi: aspeed: Don't clear all IRQs during OPB transfers Eddie James
2024-02-26 16:53 ` [PATCH v2 18/31] fsi: aspeed: Only read result register for successful read Eddie James
2024-02-26 16:53 ` Eddie James [this message]
2024-02-26 16:53 ` [PATCH v2 20/31] fsi: aspeed: Disable relative addressing and IPOLL for cfam reset Eddie James
2024-02-26 16:53 ` [PATCH v2 21/31] fsi: aspeed: Use common master error handler Eddie James
2024-02-26 16:53 ` [PATCH v2 22/31] fsi: core: Add interrupt support Eddie James
2024-02-26 16:53 ` [PATCH v2 23/31] fsi: aspeed: " Eddie James
2024-02-26 16:53 ` [PATCH v2 24/31] fsi: hub: " Eddie James
2024-02-26 16:53 ` [PATCH v2 25/31] i2c: fsi: Calculate clock divider from local bus frequency Eddie James
2024-04-15 22:11   ` Andi Shyti
2024-04-16 18:09     ` Eddie James
2024-04-16 21:20       ` Guenter Roeck
2024-04-17 13:50         ` Eddie James
2024-02-26 16:53 ` [PATCH v2 26/31] i2c: fsi: Improve formatting Eddie James
2024-04-15 22:13   ` Andi Shyti
2024-02-26 16:53 ` [PATCH v2 27/31] i2c: fsi: Change fsi_i2c_write_reg to accept data instead of a pointer Eddie James
2024-02-26 16:53 ` [PATCH v2 28/31] i2c: fsi: Remove list structure of ports Eddie James
2024-02-26 16:53 ` [PATCH v2 29/31] i2c: fsi: Define a function to check status error bits Eddie James
2024-02-26 16:53 ` [PATCH v2 30/31] i2c: fsi: Add boolean for skip stop command on abort Eddie James
2024-02-26 16:53 ` [PATCH v2 31/31] i2c: fsi: Add interrupt support Eddie James
2024-02-27 13:44 ` [PATCH v2 00/31] fsi: Interrupt support Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240226165321.91976-20-eajames@linux.ibm.com \
    --to=eajames@linux.ibm.com \
    --cc=alistair@popple.id.au \
    --cc=andi.shyti@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jk@ozlabs.org \
    --cc=joel@jms.id.au \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=lakshmiy@us.ibmcom \
    --cc=linux-fsi@lists.ozlabs.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).