[PATCH v4 01/10] ARM: dts: aspeed: Harma: Revise SGPIO line name.

[Peter Yin <peteryin.openbmc@gmail.com>]

The same name as reset-control-smb-e1s
change to reset-control-smb-e1s-0 and reset-control-smb-e1s-0.

Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
---

Summary:
Revise linux device tree entry related to Meta(Facebook) Harma
specific devices connected to BMC(AST2600) SoC.

Base on : https://lore.kernel.org/all/CACPK8XePx+PvDKzPMjPRn_g9z8yrtAmLvP8Qbepm1AVjuCbaKw@mail.gmail.com/

Change log:

v3 -> v4
  - Patch 0010 - Revise node name
  - fixed PDB temperature node name in Patch 0006

v2 -> v3
  - Patch 0007 - Revise max31790 address
  - Patch 0008 - Harma: Add NIC Fru device
  - Patch 0009 - Add ltc4286 device

v1 -> v2
  - Add infineon,slb9670 information for tpm.
  - Patch 0006 - Add PDB temperature.

v1
  - Patch 0001 - Revise SGPIO line name.
  - Patch 0002 - Mapping ttyS2 to UART4.
  - Patch 0003 - Remove Vuart.
  - Patch 0004 - Add cpu power good line name.
  - Patch 0005 - Add spi-gpio.

---
 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
index 7db3f9eb0016..8a173863ef24 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
@@ -505,9 +505,9 @@ &sgpiom0 {
 	"","reset-control-cpu0-p1-mux",
 	"","reset-control-e1s-mux",
 	"power-host-good","reset-control-mb-mux",
-	"","reset-control-smb-e1s",
+	"","reset-control-smb-e1s-0",
 	/*E0-E3 line 64-71*/
-	"","reset-control-smb-e1s",
+	"","reset-control-smb-e1s-1",
 	"host-ready-n","reset-control-srst",
 	"presence-e1s-0","reset-control-usb-hub",
 	"","reset-control",
-- 
2.25.1