Re: [PATCH v2 4/6] net: phy: DP83640: Add EDPD management

[Maxime Chevallier <maxime.chevallier@bootlin.com>]

Hello Bastien,

On Tue, 27 Feb 2024 10:39:43 +0100
Bastien Curutchet <bastien.curutchet@bootlin.com> wrote:

> The driver does not support enabling/disabling Energy Detect Power Down
> (EDPD).
> The PHY itself support EDPD.
> 
> Add missing part in the driver in order to have this support based on
> ethtool {set,get}_phy_tunable functions.
> 
> Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
> ---
>  drivers/net/phy/dp83640.c     | 62 +++++++++++++++++++++++++++++++++++
>  drivers/net/phy/dp83640_reg.h |  4 +++
>  2 files changed, 66 insertions(+)
> 
> diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c
> index c46c81ef0ad0..16c9fda50b19 100644
> --- a/drivers/net/phy/dp83640.c
> +++ b/drivers/net/phy/dp83640.c
> @@ -1531,6 +1531,66 @@ static void dp83640_remove(struct phy_device *phydev)
>  	kfree(dp83640);
>  }
>  
> +static int dp83640_get_edpd(struct phy_device *phydev, u16 *edpd)
> +{
> +	int val;
> +
> +	phy_write(phydev, PAGESEL, 0);

Same comment as the previous patch on paged accesses

> +	val = phy_read(phydev, EDCR);
> +	if (val & ED_EN)
> +		*edpd = 2000; /* 2 seconds */
> +	else
> +		*edpd = ETHTOOL_PHY_EDPD_DISABLE;
> +
> +	return 0;
> +}
> +
> +static int dp83640_set_edpd(struct phy_device *phydev, u16 edpd)
> +{
> +	int val;
> +
> +	phy_write(phydev, PAGESEL, 0);

ditto

> +	val = phy_read(phydev, EDCR);
> +
> +	switch (edpd) {
> +	case ETHTOOL_PHY_EDPD_DFLT_TX_MSECS:
> +	case 2000: /* 2 seconds */
> +		val |= ED_EN;
> +		break;
> +	case ETHTOOL_PHY_EDPD_DISABLE:
> +		val &= ~ED_EN;
> +		break;
> +	default:
> +		return -EINVAL;
> +	}
> +
> +	phy_write(phydev, EDCR, val);

Here you could use phy_clear_bits / phy_set_bits, which are flavors of
the phy_modify accessors.

> +
> +	return 0;
> +}
> +
> +static int dp83640_get_tunable(struct phy_device *phydev,
> +			       struct ethtool_tunable *tuna, void *data)
> +{
> +	switch (tuna->id) {
> +	case ETHTOOL_PHY_EDPD:
> +		return dp83640_get_edpd(phydev, data);
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +}
> +
> +static int dp83640_set_tunable(struct phy_device *phydev,
> +			       struct ethtool_tunable *tuna, const void *data)
> +{
> +	switch (tuna->id) {
> +	case ETHTOOL_PHY_EDPD:
> +		return dp83640_set_edpd(phydev, *(u16 *)data);
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +}
> +
>  static int dp83640_led_brightness_set(struct phy_device *phydev, u8 index,
>  				      enum led_brightness brightness)
>  {
> @@ -1692,6 +1752,8 @@ static struct phy_driver dp83640_driver = {
>  	.name		= "NatSemi DP83640",
>  	/* PHY_BASIC_FEATURES */
>  	.probe		= dp83640_probe,
> +	.get_tunable    = dp83640_get_tunable,
> +	.set_tunable    = dp83640_set_tunable,
>  	.remove		= dp83640_remove,
>  	.soft_reset	= dp83640_soft_reset,
>  	.config_init	= dp83640_config_init,
> diff --git a/drivers/net/phy/dp83640_reg.h b/drivers/net/phy/dp83640_reg.h
> index 09dd2d2527c7..bf34d422d91e 100644
> --- a/drivers/net/phy/dp83640_reg.h
> +++ b/drivers/net/phy/dp83640_reg.h
> @@ -9,6 +9,7 @@
>  #define LEDCR                     0x0018 /* PHY Control Register */
>  #define PHYCR                     0x0019 /* PHY Control Register */
>  #define PHYCR2                    0x001c /* PHY Control Register 2 */
> +#define EDCR                      0x001D /* Energy Detect Control Register */
>  
>  #define PAGE4                     0x0004
>  #define PTP_CTL                   0x0014 /* PTP Control Register */
> @@ -64,6 +65,9 @@
>  /* Bit definitions for the PHYCR2 register */
>  #define BC_WRITE                  (1<<11) /* Broadcast Write Enable */
>  
> +/* Bit definitions for the EDCR register */
> +#define ED_EN		          BIT(15) /* Enable Energy Detect Mode */
> +
>  /* Bit definitions for the PTP_CTL register */
>  #define TRIG_SEL_SHIFT            (10)    /* PTP Trigger Select */
>  #define TRIG_SEL_MASK             (0x7)

Thanks,

Maxime