From: Stefan Eichenberger <eichest@gmail.com>
To: nm@ti.com, vigneshr@ti.com, kristo@kernel.org,
robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
conor+dt@kernel.org
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, francesco.dolcini@toradex.com,
Stefan Eichenberger <stefan.eichenberger@toradex.com>
Subject: [PATCH v1 0/2] arm64: dts: ti: k3-am62-verdin: add sleep-moci support
Date: Fri, 1 Mar 2024 09:48:59 +0100 [thread overview]
Message-ID: <20240301084901.16656-1-eichest@gmail.com> (raw)
From: Stefan Eichenberger <stefan.eichenberger@toradex.com>
This patch series adds support for sleep-moci to the Verdin AM62 in
combination with the Dahlia carrier board. sleep-moci is a GPIO that
allows the system on module to turn off regulators that are not needed
in suspend mode on the carrier board.
Commit ba9d3cd71f15 ("dt-bindings: usb: microchip,usb5744: Remove
peer-hub as requirement") from linux-next is needed to make DTB_CHECK
pass without peer-hub set for the hub on the usb1 interface.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Stefan Eichenberger (2):
arm64: dts: ti: k3-am62-verdin: replace sleep-moci hog with regulator
arm64: dts: ti: k3-am62-verdin-dahlia: support sleep-moci
.../boot/dts/ti/k3-am62-verdin-dahlia.dtsi | 22 +++++++++++++++++
arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi | 24 ++++++++++++-------
2 files changed, 38 insertions(+), 8 deletions(-)
--
2.40.1
next reply other threads:[~2024-03-01 8:49 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-01 8:48 Stefan Eichenberger [this message]
2024-03-01 8:49 ` [PATCH v1 1/2] arm64: dts: ti: k3-am62-verdin: replace sleep-moci hog with regulator Stefan Eichenberger
2024-03-01 9:00 ` Francesco Dolcini
2024-03-01 8:49 ` [PATCH v1 2/2] arm64: dts: ti: k3-am62-verdin-dahlia: support sleep-moci Stefan Eichenberger
2024-03-01 9:00 ` Francesco Dolcini
2024-04-17 7:53 ` [PATCH v1 0/2] arm64: dts: ti: k3-am62-verdin: add sleep-moci support Francesco Dolcini
2024-04-26 22:42 ` Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240301084901.16656-1-eichest@gmail.com \
--to=eichest@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=francesco.dolcini@toradex.com \
--cc=kristo@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=stefan.eichenberger@toradex.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).