From: Lee Jones <lee@kernel.org>
To: James Ogletree <jogletre@opensource.cirrus.com>
Cc: dmitry.torokhov@gmail.com, robh+dt@kernel.org,
krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org,
broonie@kernel.org, jeff@labundy.com,
patches@opensource.cirrus.com, linux-sound@vger.kernel.org,
linux-input@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH v8 3/5] mfd: cs40l50: Add support for CS40L50 core driver
Date: Fri, 1 Mar 2024 09:17:16 +0000 [thread overview]
Message-ID: <20240301091716.GA1688857@google.com> (raw)
In-Reply-To: <20240221003630.2535938-4-jogletre@opensource.cirrus.com>
On Wed, 21 Feb 2024, James Ogletree wrote:
> Introduce support for Cirrus Logic Device CS40L50: a
> haptic driver with waveform memory, integrated DSP,
> and closed-loop algorithms.
>
> The MFD component registers and initializes the device.
>
> Signed-off-by: James Ogletree <jogletre@opensource.cirrus.com>
> ---
> MAINTAINERS | 2 +
> drivers/mfd/Kconfig | 30 ++
> drivers/mfd/Makefile | 4 +
> drivers/mfd/cs40l50-core.c | 531 ++++++++++++++++++++++++++++++++++++
> drivers/mfd/cs40l50-i2c.c | 69 +++++
> drivers/mfd/cs40l50-spi.c | 69 +++++
> include/linux/mfd/cs40l50.h | 142 ++++++++++
> 7 files changed, 847 insertions(+)
> create mode 100644 drivers/mfd/cs40l50-core.c
> create mode 100644 drivers/mfd/cs40l50-i2c.c
> create mode 100644 drivers/mfd/cs40l50-spi.c
> create mode 100644 include/linux/mfd/cs40l50.h
Mostly fine, just a few nits.
Assumingly this needs to go in via one tree (usually MFD).
I can't do so until the other maintainers have provided Acks.
[...]
> +static struct regmap_irq_chip cs40l50_irq_chip = {
> + .name = "CS40L50 IRQ Controller",
> +
> + .status_base = CS40L50_IRQ1_INT_1,
> + .mask_base = CS40L50_IRQ1_MASK_1,
> + .ack_base = CS40L50_IRQ1_INT_1,
> + .num_regs = 22,
> +
> + .irqs = cs40l50_reg_irqs,
> + .num_irqs = ARRAY_SIZE(cs40l50_reg_irqs),
> +
> + .runtime_pm = true,
> +};
> +
> +int cs40l50_dsp_write(struct device *dev, struct regmap *regmap, u32 val)
> +{
> + int err, i;
> + u32 ack;
> +
> + /* Device NAKs if exiting hibernation, so optionally retry here */
> + for (i = 0; i < CS40L50_DSP_TIMEOUT_COUNT; i++) {
> + err = regmap_write(regmap, CS40L50_DSP_QUEUE, val);
> + if (!err)
> + break;
> +
> + usleep_range(CS40L50_DSP_POLL_US, CS40L50_DSP_POLL_US + 100);
> + }
> +
> + /* If we never wrote, don't bother checking for ACK */
"If the write never took place, no need to check for the ACK"
> + if (i == CS40L50_DSP_TIMEOUT_COUNT) {
> + dev_err(dev, "Timed out writing %#X to DSP: %d\n", val, err);
> + return err;
> + }
> +
> + err = regmap_read_poll_timeout(regmap, CS40L50_DSP_QUEUE, ack, !ack,
> + CS40L50_DSP_POLL_US,
> + CS40L50_DSP_POLL_US * CS40L50_DSP_TIMEOUT_COUNT);
> + if (err)
> + dev_err(dev, "DSP did not ack %#X: %d\n", val, err);
> +
> + return err;
> +}
> +EXPORT_SYMBOL_GPL(cs40l50_dsp_write);
> +
> +static const struct cs_dsp_region cs40l50_dsp_regions[] = {
> + { .type = WMFW_HALO_PM_PACKED, .base = CS40L50_PMEM_0 },
> + { .type = WMFW_HALO_XM_PACKED, .base = CS40L50_XMEM_PACKED_0 },
> + { .type = WMFW_HALO_YM_PACKED, .base = CS40L50_YMEM_PACKED_0 },
> + { .type = WMFW_ADSP2_XM, .base = CS40L50_XMEM_UNPACKED24_0 },
> + { .type = WMFW_ADSP2_YM, .base = CS40L50_YMEM_UNPACKED24_0 },
> +};
> +
> +static void cs40l50_dsp_remove(void *data)
> +{
> + cs_dsp_remove((struct cs_dsp *)data);
Is the cast required?
Where is this function?
> +}
> +
> +static const struct cs_dsp_client_ops cs40l50_client_ops;
What's this for? Where is it used?
In general, I'm not a fan of empty struct definitions like this.
> +static int cs40l50_dsp_init(struct cs40l50 *cs40l50)
> +{
> + int err;
> +
> + cs40l50->dsp.num = 1;
> + cs40l50->dsp.type = WMFW_HALO;
> + cs40l50->dsp.dev = cs40l50->dev;
> + cs40l50->dsp.regmap = cs40l50->regmap;
> + cs40l50->dsp.base = CS40L50_CORE_BASE;
> + cs40l50->dsp.base_sysinfo = CS40L50_SYS_INFO_ID;
> + cs40l50->dsp.mem = cs40l50_dsp_regions;
> + cs40l50->dsp.num_mems = ARRAY_SIZE(cs40l50_dsp_regions);
> + cs40l50->dsp.no_core_startstop = true;
> + cs40l50->dsp.client_ops = &cs40l50_client_ops;
> +
> + err = cs_dsp_halo_init(&cs40l50->dsp);
> + if (err)
> + return err;
> +
> + return devm_add_action_or_reset(cs40l50->dev, cs40l50_dsp_remove,
> + &cs40l50->dsp);
> +}
[...]
> +++ b/drivers/mfd/cs40l50-i2c.c
> @@ -0,0 +1,69 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * CS40L50 Advanced Haptic Driver with waveform memory,
> + * integrated DSP, and closed-loop algorithms
> + *
> + * Copyright 2024 Cirrus Logic, Inc.
> + *
> + * Author: James Ogletree <james.ogletree@cirrus.com>
> + */
> +
> +#include <linux/i2c.h>
> +#include <linux/mfd/cs40l50.h>
> +
> +static int cs40l50_i2c_probe(struct i2c_client *client)
> +{
> + struct device *dev = &client->dev;
> + struct cs40l50 *cs40l50;
> +
> + cs40l50 = devm_kzalloc(dev, sizeof(*cs40l50), GFP_KERNEL);
> + if (!cs40l50)
> + return -ENOMEM;
> +
> + i2c_set_clientdata(client, cs40l50);
> +
> + cs40l50->regmap = devm_regmap_init_i2c(client, &cs40l50_regmap);
> + if (IS_ERR(cs40l50->regmap))
> + return dev_err_probe(cs40l50->dev, PTR_ERR(cs40l50->regmap),
> + "Failed to initialize register map\n");
> +
> + cs40l50->dev = dev;
> + cs40l50->irq = client->irq;
> +
> + return cs40l50_probe(cs40l50);
> +}
> +
> +static void cs40l50_i2c_remove(struct i2c_client *client)
> +{
> + struct cs40l50 *cs40l50 = i2c_get_clientdata(client);
> +
> + cs40l50_remove(cs40l50);
> +}
> +
> +static const struct i2c_device_id cs40l50_id_i2c[] = {
> + {"cs40l50"},
Spaces either side of the "s
> + {}
> +};
> +MODULE_DEVICE_TABLE(i2c, cs40l50_id_i2c);
> +
> +static const struct of_device_id cs40l50_of_match[] = {
> + { .compatible = "cirrus,cs40l50" },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, cs40l50_of_match);
> +
> +static struct i2c_driver cs40l50_i2c_driver = {
> + .driver = {
> + .name = "cs40l50",
> + .of_match_table = cs40l50_of_match,
> + .pm = pm_ptr(&cs40l50_pm_ops),
> + },
> + .id_table = cs40l50_id_i2c,
> + .probe = cs40l50_i2c_probe,
> + .remove = cs40l50_i2c_remove,
> +};
> +module_i2c_driver(cs40l50_i2c_driver);
> +
> +MODULE_DESCRIPTION("CS40L50 I2C Driver");
> +MODULE_AUTHOR("James Ogletree, Cirrus Logic Inc. <james.ogletree@cirrus.com>");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/mfd/cs40l50-spi.c b/drivers/mfd/cs40l50-spi.c
> new file mode 100644
> index 000000000000..9e18bb74eae0
> --- /dev/null
> +++ b/drivers/mfd/cs40l50-spi.c
> @@ -0,0 +1,69 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * CS40L50 Advanced Haptic Driver with waveform memory,
> + * integrated DSP, and closed-loop algorithms
> + *
> + * Copyright 2024 Cirrus Logic, Inc.
> + *
> + * Author: James Ogletree <james.ogletree@cirrus.com>
> + */
> +
> +#include <linux/mfd/cs40l50.h>
> +#include <linux/spi/spi.h>
> +
> +static int cs40l50_spi_probe(struct spi_device *spi)
> +{
> + struct cs40l50 *cs40l50;
> + struct device *dev = &spi->dev;
> +
> + cs40l50 = devm_kzalloc(dev, sizeof(*cs40l50), GFP_KERNEL);
> + if (!cs40l50)
> + return -ENOMEM;
> +
> + spi_set_drvdata(spi, cs40l50);
> +
> + cs40l50->regmap = devm_regmap_init_spi(spi, &cs40l50_regmap);
> + if (IS_ERR(cs40l50->regmap))
> + return dev_err_probe(cs40l50->dev, PTR_ERR(cs40l50->regmap),
> + "Failed to initialize register map\n");
> +
> + cs40l50->dev = dev;
> + cs40l50->irq = spi->irq;
> +
> + return cs40l50_probe(cs40l50);
> +}
> +
> +static void cs40l50_spi_remove(struct spi_device *spi)
> +{
> + struct cs40l50 *cs40l50 = spi_get_drvdata(spi);
> +
> + cs40l50_remove(cs40l50);
> +}
> +
> +static const struct spi_device_id cs40l50_id_spi[] = {
> + {"cs40l50"},
As above.
> + {}
> +};
> +MODULE_DEVICE_TABLE(spi, cs40l50_id_spi);
> +
> +static const struct of_device_id cs40l50_of_match[] = {
> + { .compatible = "cirrus,cs40l50" },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, cs40l50_of_match);
> +
> +static struct spi_driver cs40l50_spi_driver = {
> + .driver = {
> + .name = "cs40l50",
> + .of_match_table = cs40l50_of_match,
> + .pm = pm_ptr(&cs40l50_pm_ops),
> + },
> + .id_table = cs40l50_id_spi,
> + .probe = cs40l50_spi_probe,
> + .remove = cs40l50_spi_remove,
> +};
> +module_spi_driver(cs40l50_spi_driver);
> +
> +MODULE_DESCRIPTION("CS40L50 SPI Driver");
> +MODULE_AUTHOR("James Ogletree, Cirrus Logic Inc. <james.ogletree@cirrus.com>");
> +MODULE_LICENSE("GPL");
> diff --git a/include/linux/mfd/cs40l50.h b/include/linux/mfd/cs40l50.h
> new file mode 100644
> index 000000000000..d855784a88a9
> --- /dev/null
> +++ b/include/linux/mfd/cs40l50.h
> @@ -0,0 +1,142 @@
> +/* SPDX-License-Identifier: GPL-2.0
> + *
> + * CS40L50 Advanced Haptic Driver with waveform memory,
> + * integrated DSP, and closed-loop algorithms
> + *
> + * Copyright 2024 Cirrus Logic, Inc.
> + *
> + * Author: James Ogletree <james.ogletree@cirrus.com>
> + */
> +
> +#ifndef __CS40L50_H__
> +#define __CS40L50_H__
MFD_
And at the bottom of this file.
[...]
> +int cs40l50_dsp_write(struct device *dev, struct regmap *regmap, u32 val);
> +int cs40l50_probe(struct cs40l50 *cs40l50);
> +int cs40l50_remove(struct cs40l50 *cs40l50);
> +
> +extern const struct regmap_config cs40l50_regmap;
> +extern const struct dev_pm_ops cs40l50_pm_ops;
> +
> +#endif /* __CS40L50_H__ */
Here.
--
Lee Jones [李琼斯]
next prev parent reply other threads:[~2024-03-01 9:17 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-21 0:36 [PATCH v8 0/5] Add support for CS40L50 James Ogletree
2024-02-21 0:36 ` [PATCH v8 1/5] firmware: cs_dsp: Add write sequencer interface James Ogletree
2024-02-21 9:22 ` Charles Keepax
2024-02-21 0:36 ` [PATCH v8 2/5] dt-bindings: input: cirrus,cs40l50: Add initial DT binding James Ogletree
2024-02-21 0:36 ` [PATCH v8 3/5] mfd: cs40l50: Add support for CS40L50 core driver James Ogletree
2024-03-01 9:17 ` Lee Jones [this message]
2024-03-01 16:36 ` James Ogletree
2024-03-05 9:58 ` Lee Jones
2024-03-05 10:20 ` Charles Keepax
2024-03-05 20:55 ` James Ogletree
2024-02-21 0:36 ` [PATCH v8 4/5] Input: cs40l50 - Add support for the CS40L50 haptic driver James Ogletree
2024-02-21 0:36 ` [PATCH v8 5/5] ASoC: cs40l50: Support I2S streaming to CS40L50 James Ogletree
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240301091716.GA1688857@google.com \
--to=lee@kernel.org \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=jeff@labundy.com \
--cc=jogletre@opensource.cirrus.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=patches@opensource.cirrus.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).