Re: [PATCH 4/5] riscv: dts: add initial canmv-k230 and k230-evb dts

[Conor Dooley <conor@kernel.org>]

[-- Attachment #1: Type: text/plain, Size: 4127 bytes --]

Hey,

Meant to reply here earlier but I got distracted.

On Sun, Mar 03, 2024 at 09:26:26PM +0800, Yangyu Chen wrote:
> Add initial dts for CanMV-K230 and K230-EVB powered by Canaan Kendryte
> K230 SoC [1].
> 
> Some key considerations:
> - Only enable BigCore which is 1.6GHz RV64GCBV
> 
> Since is there cache coherence between two cores remains a mystery since
> they have a dedicated L2 Cache. And the factory SDK uses it for other OS
> by default.
> 
> Meanwhile, although docs from Canaan said 1.6GHz Core with Vector is
> CPU1, the csr.mhartid of this core is 0.
> 
> - Support for "zba" "zbb" "zbc" "zbs" are tested by hand
> 
> The user manual of C908 from T-Head does not document it specifically.
> It just said it supports B extension V1.0-rc1. [2]
> 
> - Support for "zicbom" is tested by hand
> 
> Have tested with some out-of-tree drivers that need DMA and they do not
> come to the dts currently.
> 
> - Cache parameters are inferred from T-Head docs [2] and Cannan docs [1]
> 
> L1i: 32KB, VIPT 4-Way set-associative, 64B Cacheline
> L1d: 32KB, VIPT 4-Way set-associative, 64B Cacheline
> L2: 256KB, PIPI 16-way set-associative, 64B Cacheline
> 
> The numbers of cache sets are calculated from these parameters.
> 
> - MMU only supports Sv39
> 
> Since T-Head docs [2] says C908 should support sv48. However, it will fail
> during the kernel probe. I also tested it by hand on M-Mode software,
> writing sv48 to satp.mode will not trap but will leave the csr unchanged.
> 
> [1] https://developer.canaan-creative.com/k230/dev/zh/00_hardware/K230_datasheet.html#chapter-1-introduction
> [2] https://occ-intl-prod.oss-ap-southeast-1.aliyuncs.com/resource//1699268369347/XuanTie-C908-UserManual.pdf
> 
> Signed-off-by: Yangyu Chen <cyy@cyyself.name>
> ---
>  arch/riscv/boot/dts/canaan/Makefile       |   2 +
>  arch/riscv/boot/dts/canaan/canmv-k230.dts |  23 ++++

Could you name this file "k230-canmv.dts" please, so that the soc comes
first?

>  arch/riscv/boot/dts/canaan/k230-evb.dts   |  23 ++++
>  arch/riscv/boot/dts/canaan/k230.dtsi      | 146 ++++++++++++++++++++++
>  4 files changed, 194 insertions(+)
>  create mode 100644 arch/riscv/boot/dts/canaan/canmv-k230.dts
>  create mode 100644 arch/riscv/boot/dts/canaan/k230-evb.dts
>  create mode 100644 arch/riscv/boot/dts/canaan/k230.dtsi
> 
> diff --git a/arch/riscv/boot/dts/canaan/Makefile b/arch/riscv/boot/dts/canaan/Makefile
> index 987d1f0c41f0..b4a0ec668f9a 100644
> --- a/arch/riscv/boot/dts/canaan/Makefile
> +++ b/arch/riscv/boot/dts/canaan/Makefile
> @@ -5,3 +5,5 @@ dtb-$(CONFIG_ARCH_CANAAN) += sipeed_maix_bit.dtb
>  dtb-$(CONFIG_ARCH_CANAAN) += sipeed_maix_dock.dtb
>  dtb-$(CONFIG_ARCH_CANAAN) += sipeed_maix_go.dtb
>  dtb-$(CONFIG_ARCH_CANAAN) += sipeed_maixduino.dtb
> +dtb-$(CONFIG_ARCH_CANAAN) += k230-evb.dtb
> +dtb-$(CONFIG_ARCH_CANAAN) += canmv-k230.dtb
> \ No newline at end of file
> diff --git a/arch/riscv/boot/dts/canaan/canmv-k230.dts b/arch/riscv/boot/dts/canaan/canmv-k230.dts
> new file mode 100644
> index 000000000000..09777616d30e
> --- /dev/null
> +++ b/arch/riscv/boot/dts/canaan/canmv-k230.dts
> @@ -0,0 +1,23 @@
> +// SPDX-License-Identifier: GPL-2.0+

Is there a reason that you only put these under GPL-2.0+?
The usual license for DT stuff is (GPL-2.0 OR BSD-2-Clause), dual
licensing makes it easier for other projects to use the devicetrees.

> +
> +		plic: interrupt-controller@f00000000 {
> +			compatible = "thead,c900-plic";
> +			reg = <0xf 0x00000000 0x0 0x04000000>;
> +			interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>;
> +			interrupt-controller;
> +			reg-names = "control";
> +			#address-cells = <0>;
> +			#interrupt-cells = <2>;
> +			riscv,ndev = <208>;
> +		};
> +
> +		clint: timer@f04000000 {
> +			compatible = "thead,c900-clint";
> +			reg = <0xf 0x04000000 0x0 0x04000000>;
> +			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>;
> +		};

Both of these should have SoC-specific compatibles. Without them, this
should not pass dtbs_check. Did you run it?

Cheers,
Conor.


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]