[PATCH 1/2] dt-bindings: hwmon: lm87: convert to dtschema

[Javier Carrasco <javier.carrasco.cruz@gmail.com>]

Convert existing bindings to dtschema to support validation.

This is a straightforward conversion with no new properties.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
---
 Documentation/devicetree/bindings/hwmon/lm87.txt   | 30 ----------
 .../devicetree/bindings/hwmon/ti,lm87.yaml         | 69 ++++++++++++++++++++++
 2 files changed, 69 insertions(+), 30 deletions(-)

diff --git a/Documentation/devicetree/bindings/hwmon/lm87.txt b/Documentation/devicetree/bindings/hwmon/lm87.txt
deleted file mode 100644
index 758ff398b67b..000000000000
--- a/Documentation/devicetree/bindings/hwmon/lm87.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-*LM87 hwmon sensor.
-
-Required properties:
-- compatible: Should be
-	"ti,lm87"
-
-- reg: I2C address
-
-optional properties:
-- has-temp3: This configures pins 18 and 19 to be used as a second
-             remote temperature sensing channel. By default the pins
-             are configured as voltage input pins in0 and in5.
-
-- has-in6: When set, pin 5 is configured to be used as voltage input
-           in6. Otherwise the pin is set as FAN1 input.
-
-- has-in7: When set, pin 6 is configured to be used as voltage input
-           in7. Otherwise the pin is set as FAN2 input.
-
-- vcc-supply: a Phandle for the regulator supplying power, can be
-              configured to measure 5.0V power supply. Default is 3.3V.
-
-Example:
-
-lm87@2e {
-	compatible = "ti,lm87";
-	reg = <0x2e>;
-	has-temp3;
-	vcc-supply = <&reg_5v0>;
-};
diff --git a/Documentation/devicetree/bindings/hwmon/ti,lm87.yaml b/Documentation/devicetree/bindings/hwmon/ti,lm87.yaml
new file mode 100644
index 000000000000..f553235a7321
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ti,lm87.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/ti,lm87.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments LM87 Hardware Monitor
+
+maintainers:
+  - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+description: |
+  The LM87 is a serial interface system hardware monitor
+  with remote diode temperature sensing.
+
+  Datasheets:
+    https://www.ti.com/product/LM87
+
+properties:
+  compatible:
+    const: ti,lm87
+
+  reg:
+    maxItems: 1
+
+  has-temp3:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      This configures pins 18 and 19 to be used as a second
+      remote temperature sensing channel. By default the pins
+      are configured as voltage input pins in0 and in5.
+
+  has-in6:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      When set, pin 5 is configured to be used as voltage input
+      in6. Otherwise the pin is set as FAN1 input.
+
+  has-in7:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      When set, pin 6 is configured to be used as voltage input
+      in7. Otherwise the pin is set as FAN2 input.
+
+  vcc-supply:
+    description:
+      Regulator supplying power, can be configured to measure
+      5.0V power supply. Default is 3.3V.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hwmon@2e {
+            compatible = "ti,lm87";
+            reg = <0x2e>;
+            has-temp3;
+            vcc-supply = <&reg_5v0>;
+        };
+    };

-- 
2.40.1