Re: [PATCH 0/4] regulator: Add X-Powers AXP717 PMIC support

[Lee Jones <lee@kernel.org>]

On Thu, 21 Mar 2024, Lee Jones wrote:

> On Sun, 10 Mar 2024, Andre Przywara wrote:
> 
> > This patch series adds support for the X-Powers AXP717 PMIC, which is 
> > used recently on new boards with Allwinner SoCs.
> > Allwinner's BSP code often speaks of the AXP2202, this seems to be the
> > same chip, at least a boot0 AXP2202 driver happily drove a chip labelled
> > AXP717.
> > 
> > Patch 1 fixes a typo in some macro names for the AXP313a PMIC, I just
> > realised that during some copy&paste action. It's just an identifier
> > rename, so not a backport candidate, I'd say.
> > Patch 2 adds the compatible string to the binding document.
> > Patch 3 is the MFD part, describing the regmap and all the interrupts.
> > So far we support the regulator and power key devices, the USB and
> > charging devices will follow later.
> > Patch 4 adds the voltage regulator rails, this part is crucial to enable
> > any board using this PMIC, as we depend on those rails even for basic
> > devices.
> > 
> > Please note that I could not test this driver myself, but had success
> > messages from others. It would be good to hear from Ryan and Chris
> > here on the list, with a Tested-by: tag.
> > 
> > This series is based on next-20240308 for now. I will send a rebased
> > update after the merge window, but wanted to start discussion and review
> > now.
> > 
> > Please have a look!
> > 
> > Cheers,
> > Andre
> > 
> > Andre Przywara (4):
> >   regulator: axp20x: fix typo-ed identifier
> >   dt-bindings: mfd: x-powers,axp152: document AXP717
> >   mfd: axp20x: add support for AXP717 PMIC
> >   regulator: axp20x: add support for the AXP717
> > 
> >  .../bindings/mfd/x-powers,axp152.yaml         |  2 +
> >  drivers/mfd/axp20x-i2c.c                      |  2 +
> >  drivers/mfd/axp20x-rsb.c                      |  1 +
> >  drivers/mfd/axp20x.c                          | 90 +++++++++++++++++
> >  drivers/regulator/axp20x-regulator.c          | 94 +++++++++++++++++-
> >  include/linux/mfd/axp20x.h                    | 98 ++++++++++++++++++-
> >  6 files changed, 277 insertions(+), 10 deletions(-)
> 
> All applied and sent for build testing.  If everything works out, I'll
> send out a pull-request to an immutable branch shortly.

Okay, these are building okay based on v6.8.

I'll send out a PR once I can rebase tem onto v6.9-rc1.

Note to self: ib-mfd-regulator-6.9

-- 
Lee Jones [李琼斯]