[PATCH v4 0/2] drm/msm/dp: Rework the eDP/DP modes and add support for X1E80100

[Abel Vesa <abel.vesa@linaro.org>]

Since this new platform supports both DP and eDP, it's the perfect time
to drop the dual compatible (eDP and DP) and figure out a different way
to specify the mode. After some off-list discussion, one suggested way
was to add a 'is-edp' property to the controller node, but that approach
has been dropped due to bindings concerns. So now we lookup the panel
node in DT and based on it's presence we can safely say if it is eDP or not.

The PHY counterpart patchset is here:
https://lore.kernel.org/all/20240324-x1e80100-phy-edp-compatible-refactor-v5-0-a0db5f3150bc@linaro.org

This patchset cannot be applied without the one mentioned above because
it relies on PHY_SUBMODE_EDP and PHY_SUBMODE_DP.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
Changes in v4:
- Reworked the dp_display_get_connector_type to be more readable, like
  Bjorn suggested.
- Dropped the unrelated change w.r.t. dp_aux_get call, reported by
  Dmitry.
- Re-worded the commit message for the first patch, to align with
  Dmitry's suggestion.
- Added Dmitry's R-b tag to the X1E80100 specific patch
- Link to v3: https://lore.kernel.org/r/20240322-x1e80100-display-refactor-connector-v3-0-af14c29af665@linaro.org

Changes in v3:
- Dropped the bindings patch as this new solution doesn't involve
  bindings update.
- Dropped R-b tags as this has been entirely reworked
- Reworked to lookup the panel node in DT and set the is_edp and
  connector type based on panel node presence
- Link to v2: https://lore.kernel.org/r/20240222-x1e80100-display-refactor-connector-v2-0-bd4197dfceab@linaro.org

Changes in v2:
- Added Dmitry's R-b tag to both driver patches
- Dropped the if statement around assigning the is_edp in
  dp_display_probe, and fixed said assignment by using the connector
  type from match data instead.
- Moved the qcom,x1e80100-dp compatible where it belongs
- Re-worded the bindings commit message to follow Bjorn's suggestion
- Dropped the RFC tag as the approach doesn't seem to be questioned
  anymore 
- Link to v1: https://lore.kernel.org/r/20240221-x1e80100-display-refactor-connector-v1-0-86c0e1ebd5ec@linaro.org

---
Abel Vesa (2):
      drm/msm/dp: Add support for determining the eDP/DP mode from DT
      drm/msm/dp: Add support for the X1E80100

 drivers/gpu/drm/msm/dp/dp_display.c | 38 ++++++++++++++++++++++++++++++++++++-
 1 file changed, 37 insertions(+), 1 deletion(-)
---
base-commit: 13ee4a7161b6fd938aef6688ff43b163f6d83e37
change-id: 20231219-x1e80100-display-refactor-connector-e1c66548cae3

Best regards,
-- 
Abel Vesa <abel.vesa@linaro.org>