[PATCH] ARM: dts: stm32: move can3 node from stm32f746 to stm32f769

[Dario Binacchi <dario.binacchi@amarulasolutions.com>]

According to documents [1], [2] and [3], we have 2 CAN devices on the
stm32f746 platform and 3 on the stm32f769 platform. So let's move the
can3 node from stm32f746.dtsi to stm32f769.dtsi.

[1] https://www.st.com/en/microcontrollers-microprocessors/stm32f7-series.html
[2] RM0385: STM32F75xxx and STM32F74xxx advanced Arm®-based 32-bit MCUs
[3] RM0410: STM32F76xxx and STM32F77xxx advanced Arm®-based 32-bit MCUs
Fixes: df362914eead ("ARM: dts: stm32: re-add CAN support on stm32f746")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>

---

 arch/arm/boot/dts/st/stm32f746.dtsi | 17 -----------------
 arch/arm/boot/dts/st/stm32f769.dtsi | 17 +++++++++++++++++
 2 files changed, 17 insertions(+), 17 deletions(-)

diff --git a/arch/arm/boot/dts/st/stm32f746.dtsi b/arch/arm/boot/dts/st/stm32f746.dtsi
index 65c72b6fcc83..2537b3d47e6f 100644
--- a/arch/arm/boot/dts/st/stm32f746.dtsi
+++ b/arch/arm/boot/dts/st/stm32f746.dtsi
@@ -257,23 +257,6 @@ rtc: rtc@40002800 {
 			status = "disabled";
 		};
 
-		can3: can@40003400 {
-			compatible = "st,stm32f4-bxcan";
-			reg = <0x40003400 0x200>;
-			interrupts = <104>, <105>, <106>, <107>;
-			interrupt-names = "tx", "rx0", "rx1", "sce";
-			resets = <&rcc STM32F7_APB1_RESET(CAN3)>;
-			clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN3)>;
-			st,gcan = <&gcan3>;
-			status = "disabled";
-		};
-
-		gcan3: gcan@40003600 {
-			compatible = "st,stm32f4-gcan", "syscon";
-			reg = <0x40003600 0x200>;
-			clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN3)>;
-		};
-
 		spi2: spi@40003800 {
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm/boot/dts/st/stm32f769.dtsi b/arch/arm/boot/dts/st/stm32f769.dtsi
index 4e7d9032149c..e8cbb99e81a6 100644
--- a/arch/arm/boot/dts/st/stm32f769.dtsi
+++ b/arch/arm/boot/dts/st/stm32f769.dtsi
@@ -7,6 +7,23 @@
 
 / {
 	soc {
+		can3: can@40003400 {
+			compatible = "st,stm32f4-bxcan";
+			reg = <0x40003400 0x200>;
+			interrupts = <104>, <105>, <106>, <107>;
+			interrupt-names = "tx", "rx0", "rx1", "sce";
+			resets = <&rcc STM32F7_APB1_RESET(CAN3)>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN3)>;
+			st,gcan = <&gcan3>;
+			status = "disabled";
+		};
+
+		gcan3: gcan@40003600 {
+			compatible = "st,stm32f4-gcan", "syscon";
+			reg = <0x40003600 0x200>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN3)>;
+		};
+
 		dsi: dsi@40016c00 {
 			compatible = "st,stm32-dsi";
 			reg = <0x40016c00 0x800>;
-- 
2.43.0