[PATCH v4 1/2] dt-bindings: backlight: Add Texas Instruments LM3509

[PATCH v4 1/2] dt-bindings: backlight: Add Texas Instruments LM3509

[Patrick Gansterer]

Add Device Tree bindings for Texas Instruments LM3509 - a
High Efficiency Boost for White LED's and/or OLED Displays

Signed-off-by: Patrick Gansterer <paroga@paroga.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
Changes in v4:
  Use backlight_*() to access backlight_device
  Do not set backlight_properties.power

v3: https://lore.kernel.org/all/20240309132521.1290173-1-paroga@paroga.com/

Changes in v3:
  Improved device tree bindings documentation

v2: https://lore.kernel.org/all/20240308215617.1729664-1-paroga@paroga.com/

Changes in v2:
  Add device tree nodes for each output
  Addressed multiple smaller review comments

v1: https://lore.kernel.org/all/20240302212757.1871164-1-paroga@paroga.com/

 .../bindings/leds/backlight/ti,lm3509.yaml    | 139 ++++++++++++++++++
 1 file changed, 139 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/backlight/ti,lm3509.yaml

diff --git a/Documentation/devicetree/bindings/leds/backlight/ti,lm3509.yaml b/Documentation/devicetree/bindings/leds/backlight/ti,lm3509.yaml
new file mode 100644
index 000000000000..b67f67648852
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/ti,lm3509.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/ti,lm3509.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI LM3509 High Efficiency Boost for White LED's and/or OLED Displays
+
+maintainers:
+  - Patrick Gansterer <paroga@paroga.com>
+
+description:
+  The LM3509 current mode boost converter offers two separate outputs.
+  https://www.ti.com/product/LM3509
+
+properties:
+  compatible:
+    const: ti,lm3509
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  reset-gpios:
+    maxItems: 1
+
+  ti,brightness-rate-of-change-us:
+    description: Brightness Rate of Change in microseconds.
+    enum: [51, 13000, 26000, 52000]
+
+  ti,oled-mode:
+    description: Enable OLED mode.
+    type: boolean
+
+patternProperties:
+  "^led@[01]$":
+    type: object
+    description: Properties for a string of connected LEDs.
+
+    allOf:
+      - $ref: common.yaml#
+
+    properties:
+      reg:
+        description:
+          The control register that is used to program the two current sinks.
+          The LM3509 has two registers (BMAIN and BSUB) and are represented
+          as 0 or 1 in this property. The two current sinks can be controlled
+          independently with both registers, or register BMAIN can be
+          configured to control both sinks with the led-sources property.
+        minimum: 0
+        maximum: 1
+
+      label: true
+
+      led-sources:
+        allOf:
+          - minItems: 1
+            maxItems: 2
+            items:
+              minimum: 0
+              maximum: 1
+
+      default-brightness:
+        minimum: 0
+        maximum: 31
+        default: 18
+
+      max-brightness:
+        minimum: 0
+        maximum: 31
+        default: 31
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        backlight@36 {
+            compatible = "ti,lm3509";
+            reg = <0x36>;
+            reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+
+            ti,oled-mode;
+            ti,brightness-rate-of-change-us = <52000>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            led@0 {
+                reg = <0>;
+                led-sources = <0 1>;
+                label = "lcd-backlight";
+                default-brightness = <12>;
+                max-brightness = <31>;
+            };
+        };
+    };
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        backlight@36 {
+            compatible = "ti,lm3509";
+            reg = <0x36>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            led@0 {
+                reg = <0>;
+                default-brightness = <12>;
+            };
+
+            led@1 {
+                reg = <1>;
+                default-brightness = <15>;
+            };
+        };
+    };
-- 
2.44.0

[PATCH v4 2/2] backlight: Add new lm3509 backlight driver

[Patrick Gansterer]

This is a general driver for LM3509 backlight chip of TI.
LM3509 is High Efficiency Boost for White LEDs and/or OLED Displays with
Dual Current Sinks. This driver supports OLED/White LED select, brightness
control and sub/main control.
The datasheet can be found at http://www.ti.com/product/lm3509.

Signed-off-by: Patrick Gansterer <paroga@paroga.com>
---
 drivers/video/backlight/Kconfig     |   7 +
 drivers/video/backlight/Makefile    |   1 +
 drivers/video/backlight/lm3509_bl.c | 338 ++++++++++++++++++++++++++++
 3 files changed, 346 insertions(+)
 create mode 100644 drivers/video/backlight/lm3509_bl.c

diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index ea2d0d69bd8c..96ad5dc584b6 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -366,6 +366,13 @@ config BACKLIGHT_AAT2870
 	  If you have a AnalogicTech AAT2870 say Y to enable the
 	  backlight driver.
 
+config BACKLIGHT_LM3509
+	tristate "Backlight Driver for LM3509"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  This supports TI LM3509 Backlight Driver
+
 config BACKLIGHT_LM3630A
 	tristate "Backlight Driver for LM3630A"
 	depends on I2C && PWM
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index 06966cb20459..51a4ac5d0530 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -35,6 +35,7 @@ obj-$(CONFIG_BACKLIGHT_HP700)		+= jornada720_bl.o
 obj-$(CONFIG_BACKLIGHT_IPAQ_MICRO)	+= ipaq_micro_bl.o
 obj-$(CONFIG_BACKLIGHT_KTD253)		+= ktd253-backlight.o
 obj-$(CONFIG_BACKLIGHT_KTZ8866)		+= ktz8866.o
+obj-$(CONFIG_BACKLIGHT_LM3509)		+= lm3509_bl.o
 obj-$(CONFIG_BACKLIGHT_LM3533)		+= lm3533_bl.o
 obj-$(CONFIG_BACKLIGHT_LM3630A)		+= lm3630a_bl.o
 obj-$(CONFIG_BACKLIGHT_LM3639)		+= lm3639_bl.o
diff --git a/drivers/video/backlight/lm3509_bl.c b/drivers/video/backlight/lm3509_bl.c
new file mode 100644
index 000000000000..696ec8aab6aa
--- /dev/null
+++ b/drivers/video/backlight/lm3509_bl.c
@@ -0,0 +1,338 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+#include <linux/backlight.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#define LM3509_NAME "lm3509_bl"
+
+#define LM3509_SINK_MAIN 0
+#define LM3509_SINK_SUB 1
+#define LM3509_NUM_SINKS 2
+
+#define LM3509_DEF_BRIGHTNESS 0x12
+#define LM3509_MAX_BRIGHTNESS 0x1F
+
+#define REG_GP 0x10
+#define REG_BMAIN 0xA0
+#define REG_BSUB 0xB0
+#define REG_MAX 0xFF
+
+enum {
+	REG_GP_ENM_BIT = 0,
+	REG_GP_ENS_BIT,
+	REG_GP_UNI_BIT,
+	REG_GP_RMP0_BIT,
+	REG_GP_RMP1_BIT,
+	REG_GP_OLED_BIT,
+};
+
+struct lm3509_bl {
+	struct regmap *regmap;
+	struct backlight_device *bl_main;
+	struct backlight_device *bl_sub;
+	struct gpio_desc *reset_gpio;
+};
+
+struct lm3509_bl_led_pdata {
+	const char *label;
+	int led_sources;
+	u32 brightness;
+	u32 max_brightness;
+};
+
+static void lm3509_reset(struct lm3509_bl *data)
+{
+	if (data->reset_gpio) {
+		gpiod_set_value(data->reset_gpio, 1);
+		udelay(1);
+		gpiod_set_value(data->reset_gpio, 0);
+		udelay(10);
+	}
+}
+
+static int lm3509_update_status(struct backlight_device *bl,
+				unsigned int en_mask, unsigned int br_reg)
+{
+	struct lm3509_bl *data = bl_get_data(bl);
+	int ret;
+	bool en;
+
+	ret = regmap_write(data->regmap, br_reg, backlight_get_brightness(bl));
+	if (ret < 0)
+		return ret;
+
+	en = !backlight_is_blank(bl);
+	return regmap_update_bits(data->regmap, REG_GP, en_mask,
+				  en ? en_mask : 0);
+}
+
+static int lm3509_main_update_status(struct backlight_device *bl)
+{
+	return lm3509_update_status(bl, BIT(REG_GP_ENM_BIT), REG_BMAIN);
+}
+
+static const struct backlight_ops lm3509_main_ops = {
+	.options = BL_CORE_SUSPENDRESUME,
+	.update_status = lm3509_main_update_status,
+};
+
+static int lm3509_sub_update_status(struct backlight_device *bl)
+{
+	return lm3509_update_status(bl, BIT(REG_GP_ENS_BIT), REG_BSUB);
+}
+
+static const struct backlight_ops lm3509_sub_ops = {
+	.options = BL_CORE_SUSPENDRESUME,
+	.update_status = lm3509_sub_update_status,
+};
+
+static struct backlight_device *
+lm3509_backlight_register(struct device *dev, const char *name_suffix,
+			  struct lm3509_bl *data,
+			  const struct backlight_ops *ops,
+			  const struct lm3509_bl_led_pdata *pdata)
+
+{
+	struct backlight_device *bd;
+	struct backlight_properties props;
+	const char *label = pdata->label;
+	char name[64];
+
+	memset(&props, 0, sizeof(props));
+	props.type = BACKLIGHT_RAW;
+	props.brightness = pdata->brightness;
+	props.max_brightness = pdata->max_brightness;
+
+	if (!label) {
+		snprintf(name, sizeof(name), "lm3509-%s-%s", dev_name(dev),
+			 name_suffix);
+		label = name;
+	}
+
+	bd = devm_backlight_device_register(dev, label, dev, data, ops, &props);
+	if (bd)
+		backlight_update_status(bd);
+
+	return bd;
+}
+
+static const struct regmap_config lm3509_regmap = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = REG_MAX,
+};
+
+static int lm3509_parse_led_sources(struct device_node *node,
+				    int default_led_sources)
+{
+	u32 sources[LM3509_NUM_SINKS];
+	int ret, num_sources, i;
+
+	num_sources = of_property_count_u32_elems(node, "led-sources");
+	if (num_sources < 0)
+		return default_led_sources;
+	else if (num_sources > ARRAY_SIZE(sources))
+		return -EINVAL;
+
+	ret = of_property_read_u32_array(node, "led-sources", sources,
+					 num_sources);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < num_sources; i++) {
+		if (sources[i] >= LM3509_NUM_SINKS)
+			return -EINVAL;
+
+		ret |= BIT(sources[i]);
+	}
+
+	return ret;
+}
+
+static int lm3509_parse_dt_node(struct device *dev,
+				struct lm3509_bl_led_pdata *pdata)
+{
+	struct device_node *child;
+	int seen_led_sources = 0;
+
+	for_each_child_of_node(dev->of_node, child) {
+		struct lm3509_bl_led_pdata *pd;
+		int ret;
+		u32 reg;
+		int valid_led_sources;
+
+		ret = of_property_read_u32(child, "reg", &reg);
+		if (ret < 0)
+			return ret;
+		if (reg >= LM3509_NUM_SINKS)
+			return -EINVAL;
+		pd = &pdata[reg];
+
+		pd->led_sources = lm3509_parse_led_sources(child, BIT(reg));
+		if (pd->led_sources < 0)
+			return pd->led_sources;
+
+		if (reg == 0)
+			valid_led_sources = BIT(LM3509_SINK_MAIN) |
+					    BIT(LM3509_SINK_SUB);
+		else
+			valid_led_sources = BIT(LM3509_SINK_SUB);
+
+		if (pd->led_sources != (pd->led_sources & valid_led_sources))
+			return -EINVAL;
+
+		if (seen_led_sources & pd->led_sources)
+			return -EINVAL;
+
+		seen_led_sources |= pd->led_sources;
+
+		pd->label = NULL;
+		of_property_read_string(child, "label", &pd->label);
+
+		pd->max_brightness = LM3509_MAX_BRIGHTNESS;
+		of_property_read_u32(child, "max-brightness",
+				     &pd->max_brightness);
+		pd->max_brightness =
+			min_t(u32, pd->max_brightness, LM3509_MAX_BRIGHTNESS);
+
+		pd->brightness = LM3509_DEF_BRIGHTNESS;
+		of_property_read_u32(child, "default-brightness",
+				     &pd->brightness);
+		pd->brightness = min_t(u32, pd->brightness, pd->max_brightness);
+	}
+
+	return 0;
+}
+
+static int lm3509_probe(struct i2c_client *client)
+{
+	struct lm3509_bl *data;
+	struct device *dev = &client->dev;
+	int ret;
+	bool oled_mode = false;
+	unsigned int reg_gp_val = 0;
+	struct lm3509_bl_led_pdata pdata[LM3509_NUM_SINKS];
+	u32 rate_of_change = 0;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+		dev_err(dev, "i2c functionality check failed\n");
+		return -EOPNOTSUPP;
+	}
+
+	data = devm_kzalloc(dev, sizeof(struct lm3509_bl), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->regmap = devm_regmap_init_i2c(client, &lm3509_regmap);
+	if (IS_ERR(data->regmap))
+		return PTR_ERR(data->regmap);
+	i2c_set_clientdata(client, data);
+
+	data->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(data->reset_gpio))
+		return dev_err_probe(dev, PTR_ERR(data->reset_gpio),
+				     "Failed to get 'reset' gpio\n");
+
+	lm3509_reset(data);
+
+	memset(pdata, 0, sizeof(pdata));
+	ret = lm3509_parse_dt_node(dev, pdata);
+	if (ret)
+		return ret;
+
+	oled_mode = of_property_read_bool(dev->of_node, "ti,oled-mode");
+
+	if (!of_property_read_u32(dev->of_node,
+				  "ti,brightness-rate-of-change-us",
+				  &rate_of_change)) {
+		switch (rate_of_change) {
+		case 51:
+			reg_gp_val = 0;
+			break;
+		case 13000:
+			reg_gp_val = BIT(REG_GP_RMP1_BIT);
+			break;
+		case 26000:
+			reg_gp_val = BIT(REG_GP_RMP0_BIT);
+			break;
+		case 52000:
+			reg_gp_val = BIT(REG_GP_RMP0_BIT) |
+				     BIT(REG_GP_RMP1_BIT);
+			break;
+		default:
+			dev_warn(dev, "invalid rate of change %u\n",
+				 rate_of_change);
+			break;
+		}
+	}
+
+	if (pdata[0].led_sources ==
+	    (BIT(LM3509_SINK_MAIN) | BIT(LM3509_SINK_SUB)))
+		reg_gp_val |= BIT(REG_GP_UNI_BIT);
+	if (oled_mode)
+		reg_gp_val |= BIT(REG_GP_OLED_BIT);
+
+	ret = regmap_write(data->regmap, REG_GP, reg_gp_val);
+	if (ret < 0)
+		return ret;
+
+	if (pdata[0].led_sources) {
+		data->bl_main = lm3509_backlight_register(
+			dev, "main", data, &lm3509_main_ops, &pdata[0]);
+		if (IS_ERR(data->bl_main)) {
+			dev_err(dev, "failed to register main backlight\n");
+			return PTR_ERR(data->bl_main);
+		}
+	}
+
+	if (pdata[1].led_sources) {
+		data->bl_sub = lm3509_backlight_register(
+			dev, "sub", data, &lm3509_sub_ops, &pdata[1]);
+		if (IS_ERR(data->bl_sub)) {
+			dev_err(dev,
+				"failed to register secondary backlight\n");
+			return PTR_ERR(data->bl_sub);
+		}
+	}
+
+	return 0;
+}
+
+static void lm3509_remove(struct i2c_client *client)
+{
+	struct lm3509_bl *data = i2c_get_clientdata(client);
+
+	regmap_write(data->regmap, REG_GP, 0x00);
+}
+
+static const struct i2c_device_id lm3509_id[] = { { LM3509_NAME, 0 }, {} };
+
+MODULE_DEVICE_TABLE(i2c, lm3509_id);
+
+static const struct of_device_id lm3509_match_table[] = {
+	{
+		.compatible = "ti,lm3509",
+	},
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, lm3509_match_table);
+
+static struct i2c_driver lm3509_i2c_driver = {
+	.driver = {
+		.name = LM3509_NAME,
+		.of_match_table = lm3509_match_table,
+	},
+	.probe = lm3509_probe,
+	.remove = lm3509_remove,
+	.id_table = lm3509_id,
+};
+
+module_i2c_driver(lm3509_i2c_driver);
+
+MODULE_DESCRIPTION("Texas Instruments Backlight driver for LM3509");
+MODULE_AUTHOR("Patrick Gansterer <paroga@paroga.com>");
+MODULE_LICENSE("GPL");
-- 
2.44.0

Re: [PATCH v4 1/2] dt-bindings: backlight: Add Texas Instruments LM3509

[Daniel Thompson]

^^^
Is there any reason this patch wasn't Cc:ed to LKML (it should have
come up as part of scripts/get_maintainer.pl)?


On Sun, Mar 10, 2024 at 02:52:56PM +0100, Patrick Gansterer wrote:
> Add Device Tree bindings for Texas Instruments LM3509 - a
> High Efficiency Boost for White LED's and/or OLED Displays
>
> Signed-off-by: Patrick Gansterer <paroga@paroga.com>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
> Changes in v4:
>   Use backlight_*() to access backlight_device
>   Do not set backlight_properties.power

This looks like a changelog for the patch set rather than for patch 1.
Normally that would be posted in the covering letter rather than here.

Nevertheless:
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>


Daniel.

Re: [PATCH v4 2/2] backlight: Add new lm3509 backlight driver

[Daniel Thompson]

^^^
Also not copied to LKML...


On Sun, Mar 10, 2024 at 02:52:57PM +0100, Patrick Gansterer wrote:
> This is a general driver for LM3509 backlight chip of TI.
> LM3509 is High Efficiency Boost for White LEDs and/or OLED Displays with
> Dual Current Sinks. This driver supports OLED/White LED select, brightness
> control and sub/main control.
> The datasheet can be found at http://www.ti.com/product/lm3509.
>
> Signed-off-by: Patrick Gansterer <paroga@paroga.com>

Overall looks good but there are some review comments inline below.


> diff --git a/drivers/video/backlight/lm3509_bl.c b/drivers/video/backlight/lm3509_bl.c
> new file mode 100644
> index 000000000000..696ec8aab6aa
> --- /dev/null
> +++ b/drivers/video/backlight/lm3509_bl.c
> @@ -0,0 +1,338 @@
> <snip>
> +struct lm3509_bl {
> +	struct regmap *regmap;
> +	struct backlight_device *bl_main;
> +	struct backlight_device *bl_sub;
> +	struct gpio_desc *reset_gpio;
> +};
> +
> +struct lm3509_bl_led_pdata {

What does the p stand for here?

(only asking because pdata was the idiomatic form for platform data and
this driver only uses DT-only so I'm finding pdata values everywhere
really confusing)


> +	const char *label;
> +	int led_sources;
> +	u32 brightness;
> +	u32 max_brightness;
> +};
> +
> +static void lm3509_reset(struct lm3509_bl *data)
> +{
> +	if (data->reset_gpio) {
> +		gpiod_set_value(data->reset_gpio, 1);
> +		udelay(1);
> +		gpiod_set_value(data->reset_gpio, 0);
> +		udelay(10);
> +	}
> +}
> +
> <snip>
> +
> +static struct backlight_device *
> +lm3509_backlight_register(struct device *dev, const char *name_suffix,
> +			  struct lm3509_bl *data,
> +			  const struct backlight_ops *ops,
> +			  const struct lm3509_bl_led_pdata *pdata)
> +
> +{
> +	struct backlight_device *bd;
> +	struct backlight_properties props;
> +	const char *label = pdata->label;
> +	char name[64];
> +
> +	memset(&props, 0, sizeof(props));
> +	props.type = BACKLIGHT_RAW;
> +	props.brightness = pdata->brightness;
> +	props.max_brightness = pdata->max_brightness;

Please set props.scale appropriately for this device (given it only has
32 brightness levels I assume it is non-linear?).


> +
> +	if (!label) {
> +		snprintf(name, sizeof(name), "lm3509-%s-%s", dev_name(dev),
> +			 name_suffix);
> +		label = name;
> +	}
> +
> +	bd = devm_backlight_device_register(dev, label, dev, data, ops, &props);
> +	if (bd)
> +		backlight_update_status(bd);
> +
> +	return bd;
> +}
> +
> <snip>
> +
> +static int lm3509_probe(struct i2c_client *client)
> +{
> +	struct lm3509_bl *data;
> +	struct device *dev = &client->dev;
> +	int ret;
> +	bool oled_mode = false;
> +	unsigned int reg_gp_val = 0;
> +	struct lm3509_bl_led_pdata pdata[LM3509_NUM_SINKS];
> +	u32 rate_of_change = 0;
> +
> +	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
> +		dev_err(dev, "i2c functionality check failed\n");
> +		return -EOPNOTSUPP;
> +	}
> +
> +	data = devm_kzalloc(dev, sizeof(struct lm3509_bl), GFP_KERNEL);
> +	if (!data)
> +		return -ENOMEM;
> +
> +	data->regmap = devm_regmap_init_i2c(client, &lm3509_regmap);
> +	if (IS_ERR(data->regmap))
> +		return PTR_ERR(data->regmap);
> +	i2c_set_clientdata(client, data);
> +
> +	data->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
> +	if (IS_ERR(data->reset_gpio))
> +		return dev_err_probe(dev, PTR_ERR(data->reset_gpio),
> +				     "Failed to get 'reset' gpio\n");
> +
> +	lm3509_reset(data);
> +
> +	memset(pdata, 0, sizeof(pdata));
> +	ret = lm3509_parse_dt_node(dev, pdata);
> +	if (ret)
> +		return ret;
> +
> +	oled_mode = of_property_read_bool(dev->of_node, "ti,oled-mode");
> +
> +	if (!of_property_read_u32(dev->of_node,
> +				  "ti,brightness-rate-of-change-us",
> +				  &rate_of_change)) {
> +		switch (rate_of_change) {
> +		case 51:
> +			reg_gp_val = 0;
> +			break;
> +		case 13000:
> +			reg_gp_val = BIT(REG_GP_RMP1_BIT);
> +			break;
> +		case 26000:
> +			reg_gp_val = BIT(REG_GP_RMP0_BIT);
> +			break;
> +		case 52000:
> +			reg_gp_val = BIT(REG_GP_RMP0_BIT) |
> +				     BIT(REG_GP_RMP1_BIT);
> +			break;
> +		default:
> +			dev_warn(dev, "invalid rate of change %u\n",
> +				 rate_of_change);
> +			break;
> +		}
> +	}
> +
> +	if (pdata[0].led_sources ==
> +	    (BIT(LM3509_SINK_MAIN) | BIT(LM3509_SINK_SUB)))
> +		reg_gp_val |= BIT(REG_GP_UNI_BIT);
> +	if (oled_mode)
> +		reg_gp_val |= BIT(REG_GP_OLED_BIT);
> +
> +	ret = regmap_write(data->regmap, REG_GP, reg_gp_val);
> +	if (ret < 0)
> +		return ret;

Is this the first time we write to the peripheral? If so the error path
is probably worth a dev_err_probe() (I don't think regmap_write() logs
anything on failure to write).


> +	if (pdata[0].led_sources) {
> +		data->bl_main = lm3509_backlight_register(
> +			dev, "main", data, &lm3509_main_ops, &pdata[0]);
> +		if (IS_ERR(data->bl_main)) {
> +			dev_err(dev, "failed to register main backlight\n");
> +			return PTR_ERR(data->bl_main);

This should use dev_err_probe().


> +		}
> +	}
> +
> +	if (pdata[1].led_sources) {
> +		data->bl_sub = lm3509_backlight_register(
> +			dev, "sub", data, &lm3509_sub_ops, &pdata[1]);
> +		if (IS_ERR(data->bl_sub)) {
> +			dev_err(dev,
> +				"failed to register secondary backlight\n");
> +			return PTR_ERR(data->bl_sub);

Another good place for dev_err_probe().


Daniel.