Re: [PATCH v4 2/7] iio: accel: adxl345: Group bus configuration

[Jonathan Cameron <jic23@kernel.org>]

On Mon, 25 Mar 2024 15:33:51 +0000
Lothar Rubusch <l.rubusch@gmail.com> wrote:

> In the probe function group bus configuration and the
> indio_dev initialization to improve readability.
> 
> Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
> ---
>  drivers/iio/accel/adxl345_core.c | 13 +++++++------
>  1 file changed, 7 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/iio/accel/adxl345_core.c b/drivers/iio/accel/adxl345_core.c
> index be6758015..469015e9c 100644
> --- a/drivers/iio/accel/adxl345_core.c
> +++ b/drivers/iio/accel/adxl345_core.c
> @@ -218,22 +218,23 @@ int adxl345_core_probe(struct device *dev, struct regmap *regmap)
>  
>  	data = iio_priv(indio_dev);
>  	data->regmap = regmap;
> -	/* Enable full-resolution mode */
The naming of the written value gives this comment away + it's obviously misplaced
after previous patch. I'd just drop the comment in patch 1.

> +
>  	data->info = device_get_match_data(dev);
>  	if (!data->info)
>  		return -ENODEV;
>  
> -	ret = regmap_update_bits(regmap, ADXL345_REG_DATA_FORMAT,
> -				 ADXL345_DATA_FORMAT_MSK, ADXL345_DATA_FORMAT_FULL_RES);
> -	if (ret)
> -		return dev_err_probe(dev, ret, "Failed to set data range\n");
> -
>  	indio_dev->name = data->info->name;
>  	indio_dev->info = &adxl345_info;
>  	indio_dev->modes = INDIO_DIRECT_MODE;
>  	indio_dev->channels = adxl345_channels;
>  	indio_dev->num_channels = ARRAY_SIZE(adxl345_channels);
>  
> +	/* Enable full-resolution mode */
> +	ret = regmap_update_bits(regmap, ADXL345_REG_DATA_FORMAT,
> +				 ADXL345_DATA_FORMAT_MSK, ADXL345_DATA_FORMAT_FULL_RES);
> +	if (ret)
> +		return dev_err_probe(dev, ret, "Failed to set data range\n");
> +
>  	/* Enable measurement mode */
>  	ret = adxl345_powerup(data->regmap);
>  	if (ret < 0)