[PATCH RESEND v6 0/5] spmi: pmic-arb: Add support for multiple buses

[Abel Vesa <abel.vesa@linaro.org>]

This RFC prepares for and adds support for 2 buses, which is supported
in HW starting with version 7. Until now, none of the currently
supported platforms in upstream have used the second bus. The X1E80100
platform, on the other hand, needs the second bus for the USB2.0 to work
as there are 3 SMB2360 PMICs which provide eUSB2 repeaters and they are
all found on the second bus.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
Changes in v6:
- Changed the compatible to platform specific (X1E80100) along with the
  schema. Fixed the spmi buses unit addresses and added the empty ranges
  property. Added missing properties to the spmi buses and the
  "unevaluatedProperties: false".
- Deprecated the "qcom,bus-id" in the legacy schema.
- Changed the driver to check for legacy compatible first
- Link to v5: https://lore.kernel.org/r/20240221-spmi-multi-master-support-v5-0-3255ca413a0b@linaro.org

Changes in v5:
- Dropped the RFC as there aren't any concerns about the approach anymore
- Dropped the unused dev and res variables from pmic_arb_get_obsrvr_chnls_v2
- Link to v4: https://lore.kernel.org/r/20240220-spmi-multi-master-support-v4-0-dc813c878ba8@linaro.org

Changes in v4:
- Fixed comment above pmic_arb_init_apid_v7 by dropping the extra "bus" word
- Swicthed to devm_platform_ioremap_resource_byname for obsrvr and chnls.
  The core remains with platform_get_resource_byname as we need the core size.
- Dropped comment from probe related to the need of platform_get_resource_byname
  as it not true anymore.
- Dropped the qcom,bus-id optional property.
- Link to v3: https://lore.kernel.org/r/20240214-spmi-multi-master-support-v3-0-0bae0ef04faf@linaro.org

Changes in v3:
- Split the change into 3 separate patches. First 2 patches are moving
  apid init and core resources into version specific ops. Third one is
  adding the support for 2 buses and dedicated compatible.
- Added separate bindings patch
- Link to v2: https://lore.kernel.org/r/20240213-spmi-multi-master-support-v2-1-b3b102326906@linaro.org

Changes in v2:
- Reworked it so that it registers a spmi controller for each bus
  rather than relying on the generic framework to pass on the bus
  (master) id.
- Link to v1: https://lore.kernel.org/r/20240207-spmi-multi-master-support-v1-0-ce57f301c7fd@linaro.org

---
Abel Vesa (5):
      dt-bindings: spmi: Add X1E80100 SPMI PMIC ARB schema
      dt-bindings: spmi: Deprecate qcom,bus-id
      spmi: pmic-arb: Make the APID init a version operation
      spmi: pmic-arb: Make core resources acquiring a version operation
      spmi: pmic-arb: Add multi bus support

 .../bindings/spmi/qcom,spmi-pmic-arb.yaml          |   1 +
 .../bindings/spmi/qcom,x1e80100-spmi-pmic-arb.yaml | 136 +++
 drivers/spmi/spmi-pmic-arb.c                       | 948 +++++++++++++--------
 3 files changed, 715 insertions(+), 370 deletions(-)
---
base-commit: 4893c639cc3659cefaa675bf1e59f4e7571afb5c
change-id: 20240207-spmi-multi-master-support-832a704b779b

Best regards,
-- 
Abel Vesa <abel.vesa@linaro.org>