[PATCH v5 2/7] iio: accel: adxl345: Group bus configuration

[Lothar Rubusch <l.rubusch@gmail.com>]

In the probe function group bus configuration and the indio_dev
initialization to improve readability.

Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
---
 drivers/iio/accel/adxl345_core.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/iio/accel/adxl345_core.c b/drivers/iio/accel/adxl345_core.c
index 35df5e372..5c24ef9ca 100644
--- a/drivers/iio/accel/adxl345_core.c
+++ b/drivers/iio/accel/adxl345_core.c
@@ -229,18 +229,18 @@ int adxl345_core_probe(struct device *dev, struct regmap *regmap)
 	if (!data->info)
 		return -ENODEV;
 
-	/* Enable full-resolution mode */
-	ret = regmap_update_bits(regmap, ADXL345_REG_DATA_FORMAT,
-				 ADXL345_DATA_FORMAT_MSK, ADXL345_DATA_FORMAT_FULL_RES);
-	if (ret)
-		return dev_err_probe(dev, ret, "Failed to set data range\n");
-
 	indio_dev->name = data->info->name;
 	indio_dev->info = &adxl345_info;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->channels = adxl345_channels;
 	indio_dev->num_channels = ARRAY_SIZE(adxl345_channels);
 
+	/* Enable full-resolution mode */
+	ret = regmap_update_bits(regmap, ADXL345_REG_DATA_FORMAT,
+				 ADXL345_DATA_FORMAT_MSK, ADXL345_DATA_FORMAT_FULL_RES);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to set data range\n");
+
 	/* Enable measurement mode */
 	ret = adxl345_powerup(data->regmap);
 	if (ret < 0)
-- 
2.25.1