[PATCH AUTOSEL 6.8 33/68] arm64: dts: sm8450: correct DMIC2 and DMIC3 pin config node names

[Sasha Levin <sashal@kernel.org>]

From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

[ Upstream commit 0d3eb7ff1f3a994a5b3e49a9bd48f0c2f3c80ef5 ]

Correct the TLMM pin configuration and muxing node names used for DMIC2
and DMIC3 (dmic01 -> dmic23).  This has no functional impact, but
improves code readability and avoids any confusion when reading the DTS.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240212172335.124845-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sm8450-hdk.dts | 2 +-
 arch/arm64/boot/dts/qcom/sm8450.dtsi    | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
index a20d5d76af352..5a6e0b34934cb 100644
--- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
@@ -1147,7 +1147,7 @@ &usb_1_qmpphy_usb_ss_in {
 };
 
 &vamacro {
-	pinctrl-0 = <&dmic01_default>, <&dmic02_default>;
+	pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
 	pinctrl-names = "default";
 	vdd-micb-supply = <&vreg_s10b_1p8>;
 	qcom,dmic-sample-rate = <600000>;
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 01e4dfc4babd2..0a802c9a3c8f7 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -3934,7 +3934,7 @@ data-pins {
 				};
 			};
 
-			dmic02_default: dmic02-default-state {
+			dmic23_default: dmic23-default-state {
 				clk-pins {
 					pins = "gpio8";
 					function = "dmic2_clk";
-- 
2.43.0