[PATCH 1/9] arm64: dts: rockchip: Add cpu regulators and vcc5v0_sys to Khadas Edge 2

[PATCH 1/9] arm64: dts: rockchip: Add cpu regulators and vcc5v0_sys to Khadas Edge 2

[efectn]

From: Muhammed Efe Cetin <efectn@protonmail.com>

This commit adds 5V fixed power regulator and CPU regulators to Khadas
Edge 2.

Signed-off-by: Muhammed Efe Cetin <efectn@protonmail.com>
---
 .../dts/rockchip/rk3588s-khadas-edge2.dts     | 81 +++++++++++++++++++
 1 file changed, 81 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
index f53e993c785e..1d1ce70a0f3a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
@@ -17,6 +17,87 @@ aliases {
 	chosen {
 		stdout-path = "serial2:1500000n8";
 	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0m2_xfer>;
+	status = "okay";
+
+	vdd_cpu_big0_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big0_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_cpu_big1_s0: regulator@43 {
+		compatible = "rockchip,rk8603", "rockchip,rk8602";
+		reg = <0x43>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big1_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
 };
 
 &sdhci {
-- 
2.43.1

[PATCH 2/9] arm64: dts: rockchip: Add PMIC to Khadas Edge 2

[efectn]

From: Muhammed Efe Cetin <efectn@protonmail.com>

This commit adds PMIC to Khadas Edge 2 board.

Signed-off-by: Muhammed Efe Cetin <efectn@protonmail.com>
---
 .../dts/rockchip/rk3588s-khadas-edge2.dts     | 335 ++++++++++++++++++
 1 file changed, 335 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
index 1d1ce70a0f3a..b99d2b82c787 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
@@ -26,6 +26,16 @@ vcc5v0_sys: vcc5v0-sys-regulator {
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 	};
+
+	vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v1_nldo_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
 };
 
 &cpu_b0 {
@@ -110,6 +120,331 @@ &sdhci {
 	status = "okay";
 };
 
+&spi2 {
+	status = "okay";
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+	num-cs = <1>;
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		spi-max-frequency = <1000000>;
+		reg = <0x0>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+
+		system-power-controller;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_gpu_s0";
+				regulator-enable-ramp-delay = <400>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_lit_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_log_s0: dcdc-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_log_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_vdenc_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vdd2_ddr_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_2v0_pldo_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_3v3_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vddq_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg10 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avcc_1v8_s0: pldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "avcc_1v8_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s0: pldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avdd_1v2_s0: pldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "avdd_1v2_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_s0: pldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vcc_3v3_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vccio_sd_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			pldo6_s3: pldo-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "pldo6_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_ddr_pll_s0: nldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdd_ddr_pll_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			avdd_0v75_s0: nldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "avdd_0v75_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v85_s0: nldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdd_0v85_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v75_s0: nldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
 &uart2 {
 	pinctrl-0 = <&uart2m0_xfer>;
 	status = "okay";
-- 
2.43.1

[PATCH 3/9] arm64: dts: rockchip: Add TF card to Khadas Edge 2

[efectn]

From: Muhammed Efe Cetin <efectn@protonmail.com>

Add TF card support to Khadas Edge 2.
The board exposes sdmmc pins via EXTIO. TF card can be used with IO
module.

Signed-off-by: Muhammed Efe Cetin <efectn@protonmail.com>
---
 .../dts/rockchip/rk3588s-khadas-edge2.dts     | 34 +++++++++++++++++++
 1 file changed, 34 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
index b99d2b82c787..856ce4f869a2 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
@@ -12,6 +12,7 @@ / {
 
 	aliases {
 		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
 	};
 
 	chosen {
@@ -36,6 +37,19 @@ vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
 		regulator-max-microvolt = <1100000>;
 		vin-supply = <&vcc5v0_sys>;
 	};
+
+	vdd_3v3_sd: vdd-3v3-sd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_sd";
+		gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+		enable-active-high;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3_s3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_sd_en>;
+	};
 };
 
 &cpu_b0 {
@@ -110,6 +124,14 @@ regulator-state-mem {
 	};
 };
 
+&pinctrl {
+	vdd_sd {
+		vdd_sd_en: vdd-sd-en {
+			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
 &sdhci {
 	bus-width = <8>;
 	no-sdio;
@@ -120,6 +142,18 @@ &sdhci {
 	status = "okay";
 };
 
+&sdmmc {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	disable-wp;
+	no-mmc;
+	no-sdio;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vdd_3v3_sd>;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
 &spi2 {
 	status = "okay";
 	assigned-clocks = <&cru CLK_SPI2>;
-- 
2.43.1

[PATCH 4/9] arm64: dts: rockchip: USB2, USB3 Host, PCIe2 to Khadas Edge 2

[efectn]

From: Muhammed Efe Cetin <efectn@protonmail.com>

Khadas Edge 2 has 1x USB2 with hub, 1x USB3 Host and 1x USB-C.
This commit adds support for PCIe2, USB3 Host and USB2.

Signed-off-by: Muhammed Efe Cetin <efectn@protonmail.com>
---
 .../dts/rockchip/rk3588s-khadas-edge2.dts     | 97 +++++++++++++++++++
 1 file changed, 97 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
index 856ce4f869a2..ea7f1bb7c908 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
@@ -38,6 +38,33 @@ vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
 		vin-supply = <&vcc5v0_sys>;
 	};
 
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_host";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_pcie_wl: vcc3v3-pcie-wl-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie2_2_vcc3v3_en>;
+		regulator-name = "vcc3v3_pcie_wl";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <5000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
 	vdd_3v3_sd: vdd-3v3-sd-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_3v3_sd";
@@ -84,6 +111,14 @@ &cpu_l3 {
 	cpu-supply = <&vdd_cpu_lit_s0>;
 };
 
+&combphy0_ps {
+	status = "okay";
+};
+
+&combphy2_psu {
+	status = "okay";
+};
+
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0m2_xfer>;
@@ -130,6 +165,30 @@ vdd_sd_en: vdd-sd-en {
 			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
+
+	pcie2 {
+		pcie2_2_rst: pcie2-2-rst {
+			rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie2_2_vcc3v3_en: pcie2-2-vcc-en {
+			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pcie2x1l2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2_2_rst>;
+	reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie_wl>;
+	status = "okay";
 };
 
 &sdhci {
@@ -483,3 +542,41 @@ &uart2 {
 	pinctrl-0 = <&uart2m0_xfer>;
 	status = "okay";
 };
+
+&u2phy2 {
+	status = "okay";
+};
+
+&u2phy2_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&u2phy3 {
+	status = "okay";
+};
+
+&u2phy3_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host2_xhci {
+	status = "okay";
+};
-- 
2.43.1

[PATCH 5/9] arm64: dts: rockchip: Add ir receiver and leds to Khadas Edge 2

[efectn]

From: Muhammed Efe Cetin <efectn@protonmail.com>

Khadas Edge 2 exposes IR receiver pins as same as TF card via EXTIO. The
IR receiver is connected to MCU and SoC.

The board also has 2 PWM RGB leds. One is controlled by MCU and the
other is controlled by SoC. This commit adds support for the led
controlled by SoC using pwm-leds.

Signed-off-by: Muhammed Efe Cetin <efectn@protonmail.com>
---
 .../dts/rockchip/rk3588s-khadas-edge2.dts     | 66 +++++++++++++++++++
 1 file changed, 66 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
index ea7f1bb7c908..5a3b52e62dce 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
@@ -4,6 +4,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/leds/common.h>
 #include "rk3588s.dtsi"
 
 / {
@@ -19,6 +20,47 @@ chosen {
 		stdout-path = "serial2:1500000n8";
 	};
 
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_receiver_pin>;
+	};
+
+	leds {
+		compatible = "pwm-leds";
+
+		red_led: led-0 {
+			label = "red_led";
+			linux,default-trigger = "none";
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_RED>;
+			max-brightness = <255>;
+			pwms = <&pwm11 0 25000 0>;
+		};
+
+		green_led: led-1 {
+			label = "green_led";
+			linux,default-trigger = "default-on";
+			default-state = "on";
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			max-brightness = <255>;
+			pwms = <&pwm14 0 25000 0>;
+		};
+
+		blue_led: led-2 {
+			label = "blue_led";
+			linux,default-trigger = "none";
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_BLUE>;
+			max-brightness = <255>;
+			pwms = <&pwm15 0 25000 0>;
+		};
+	};
+
 	vcc5v0_sys: vcc5v0-sys-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc5v0_sys";
@@ -181,6 +223,12 @@ vcc5v0_host_en: vcc5v0-host-en {
 			rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
+
+	ir-receiver {
+		ir_receiver_pin: ir-receiver-pin {
+			rockchip,pins = <1  RK_PA7  RK_FUNC_GPIO  &pcfg_pull_none>;
+		};
+	};
 };
 
 &pcie2x1l2 {
@@ -191,6 +239,24 @@ &pcie2x1l2 {
 	status = "okay";
 };
 
+&pwm11 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm11m1_pins>;
+	status = "okay";
+};
+
+&pwm14 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm14m1_pins>;
+	status = "okay";
+};
+
+&pwm15 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm15m1_pins>;
+	status = "okay";
+};
+
 &sdhci {
 	bus-width = <8>;
 	no-sdio;
-- 
2.43.1

[PATCH 6/9] arm64: dts: rockchip: Add saradc and adc buttons to Khadas Edge 2 and enable tsadc

[efectn]

From: Muhammed Efe Cetin <efectn@protonmail.com>

This commit enables tsadc, saradc and the
function button on saradc line for Khadas Edge 2.

Signed-off-by: Muhammed Efe Cetin <efectn@protonmail.com>
---
 .../dts/rockchip/rk3588s-khadas-edge2.dts     | 24 +++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
index 5a3b52e62dce..dfcdbec3534d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
@@ -3,6 +3,7 @@
 /dts-v1/;
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/rockchip.h>
 #include <dt-bindings/leds/common.h>
 #include "rk3588s.dtsi"
@@ -20,6 +21,20 @@ chosen {
 		stdout-path = "serial2:1500000n8";
 	};
 
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-function {
+			label = "Function";
+			linux,code = <KEY_FN>;
+			press-threshold-microvolt = <17000>;
+		};
+	};
+
 	ir-receiver {
 		compatible = "gpio-ir-receiver";
 		gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_LOW>;
@@ -257,6 +272,11 @@ &pwm15 {
 	status = "okay";
 };
 
+&saradc {
+	vref-supply = <&avcc_1v8_s0>;
+	status = "okay";
+};
+
 &sdhci {
 	bus-width = <8>;
 	no-sdio;
@@ -604,6 +624,10 @@ regulator-state-mem {
 	};
 };
 
+&tsadc {
+	status = "okay";
+};
+
 &uart2 {
 	pinctrl-0 = <&uart2m0_xfer>;
 	status = "okay";
-- 
2.43.1

[PATCH 7/9] arm64: dts: rockchip: Add SFC to Khadas Edge 2

[efectn]

From: Muhammed Efe Cetin <efectn@protonmail.com>

This commit adds SPI flash support for Khadas Edge 2.

Signed-off-by: Muhammed Efe Cetin <efectn@protonmail.com>
---
 .../boot/dts/rockchip/rk3588s-khadas-edge2.dts     | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
index dfcdbec3534d..c2a329f151a1 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
@@ -299,6 +299,20 @@ &sdmmc {
 	status = "okay";
 };
 
+&sfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&fspim2_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-max-frequency = <100000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
 &spi2 {
 	status = "okay";
 	assigned-clocks = <&cru CLK_SPI2>;
-- 
2.43.1

[PATCH 8/9] arm64: dts: rockchip: Add UART9 (bluetooth) to Khadas Edge 2

[efectn]

From: Muhammed Efe Cetin <efectn@protonmail.com>

Khadas Edge 2 has onboard AP6275P Wi-Fi6 (PCIe2) and BT5 (UART9) module.
This commit enables UART9.

Signed-off-by: Muhammed Efe Cetin <efectn@protonmail.com>
---
 .../dts/rockchip/rk3588s-khadas-edge2.dts     | 20 +++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
index c2a329f151a1..767e21b2dc34 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
@@ -244,6 +244,20 @@ ir_receiver_pin: ir-receiver-pin {
 			rockchip,pins = <1  RK_PA7  RK_FUNC_GPIO  &pcfg_pull_none>;
 		};
 	};
+
+	wireless-bluetooth {
+		bt_reset_pin: bt-reset-pin {
+			rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_pin: bt-wake-pin {
+			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		bt_wake_host_irq: bt-wake-host-irq {
+			rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
 };
 
 &pcie2x1l2 {
@@ -647,6 +661,12 @@ &uart2 {
 	status = "okay";
 };
 
+&uart9 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart9m2_xfer &uart9m2_ctsn>;
+	status = "okay";
+};
+
 &u2phy2 {
 	status = "okay";
 };
-- 
2.43.1

[PATCH 9/9] arm64: dts: rockchip: Add RTC to Khadas Edge 2

[efectn]

From: Muhammed Efe Cetin <efectn@protonmail.com>

Khadas Edge 2 has PT7C4363 RTC that compatible with HYM8563.
The RTC pinctrl is also connected to MCU.

Signed-off-by: Muhammed Efe Cetin <efectn@protonmail.com>
---
 .../arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
index 767e21b2dc34..2022a174594c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
@@ -216,6 +216,18 @@ regulator-state-mem {
 	};
 };
 
+&i2c2 {
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		wakeup-source;
+	};
+};
+
 &pinctrl {
 	vdd_sd {
 		vdd_sd_en: vdd-sd-en {
-- 
2.43.1

[PATCH 1/9] arm64: dts: rockchip: Add cpu regulators and vcc5v0_sys to Khadas Edge 2

[efectn]

Hi Heiko,

Sorry if i bother you. Can you review the series? If there is a problem i will send the v2.

Re: [PATCH 1/9] arm64: dts: rockchip: Add cpu regulators and vcc5v0_sys to Khadas Edge 2

[Heiko Stuebner]

On Tue, 20 Feb 2024 01:34:17 +0300, efectn@6tel.net wrote:
> From: Muhammed Efe Cetin <efectn@protonmail.com>
> 
> This commit adds 5V fixed power regulator and CPU regulators to Khadas
> Edge 2.
> 
> 

Applied, thanks!

[1/9] arm64: dts: rockchip: Add cpu regulators and vcc5v0_sys to Khadas Edge 2
      commit: 925273ba9e71184a6dcde0f902b4245ed64885d1
[2/9] arm64: dts: rockchip: Add PMIC to Khadas Edge 2
      commit: 3b5d2327cb749017322ce09f7107cdc82f1a92fa
[3/9] arm64: dts: rockchip: Add TF card to Khadas Edge 2
      commit: 4a3afe9cf3711f222a9dadf50bd2e9770bb6a095
[4/9] arm64: dts: rockchip: USB2, USB3 Host, PCIe2 to Khadas Edge 2
      commit: f786eda805aa91340e151322ccc6c0ba4a591f9f
[5/9] arm64: dts: rockchip: Add ir receiver and leds to Khadas Edge 2
      commit: af6943f502b6db1ba3bc5199069c662218e23261
[6/9] arm64: dts: rockchip: Add saradc and adc buttons to Khadas Edge 2 and enable tsadc
      commit: 25e31aaebed4b0e242d9a71170f8dfdf9cc8a304
[7/9] arm64: dts: rockchip: Add SFC to Khadas Edge 2
      commit: 8711dca3b5f7a3834ae1129512f98a2367940a07
[8/9] arm64: dts: rockchip: Add UART9 (bluetooth) to Khadas Edge 2
      commit: e438acfda8a0088a3c7f450a7ffefeb56074e41e
[9/9] arm64: dts: rockchip: Add RTC to Khadas Edge 2
      commit: c0b3c764b64a5c8eee056e62580de0f44e7dcd0f

Best regards,
-- 
Heiko Stuebner <heiko@sntech.de>