From: Rob Herring <robh@kernel.org>
To: Nuno Sa <nuno.sa@analog.com>
Cc: linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
Dragos Bogdan <dragos.bogdan@analog.com>,
Jonathan Cameron <jic23@kernel.org>,
Lars-Peter Clausen <lars@metafoo.de>,
Michael Hennerich <Michael.Hennerich@analog.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Olivier Moysan <olivier.moysan@foss.st.com>
Subject: Re: [PATCH 06/10] dt-bindings: iio: dac: add bindings doc for AXI DAC driver
Date: Mon, 1 Apr 2024 08:59:48 -0500 [thread overview]
Message-ID: <20240401135948.GA349128-robh@kernel.org> (raw)
In-Reply-To: <20240328-iio-backend-axi-dac-v1-6-afc808b3fde3@analog.com>
On Thu, Mar 28, 2024 at 02:22:30PM +0100, Nuno Sa wrote:
> This adds the bindings documentation for the AXI DAC driver.
Bindings are for h/w blocks, not 'drivers'.
Reword the subject to only say 'bindings' once.
> Signed-off-by: Nuno Sa <nuno.sa@analog.com>
> ---
> .../devicetree/bindings/iio/dac/adi,axi-dac.yaml | 62 ++++++++++++++++++++++
> MAINTAINERS | 7 +++
> 2 files changed, 69 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/iio/dac/adi,axi-dac.yaml b/Documentation/devicetree/bindings/iio/dac/adi,axi-dac.yaml
> new file mode 100644
> index 000000000000..1018fd274f04
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/dac/adi,axi-dac.yaml
> @@ -0,0 +1,62 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/dac/adi,axi-dac.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analog Devices AXI DAC IP core
> +
> +maintainers:
> + - Nuno Sa <nuno.sa@analog.com>
> +
> +description: |
> + Analog Devices Generic AXI DAC IP core for interfacing a DAC device
> + with a high speed serial (JESD204B/C) or source synchronous parallel
> + interface (LVDS/CMOS).
> + Usually, some other interface type (i.e SPI) is used as a control
> + interface for the actual DAC, while this IP core will interface
> + to the data-lines of the DAC and handle the streaming of data into
> + memory via DMA.
> +
> + https://wiki.analog.com/resources/fpga/docs/axi_dac_ip
> +
> +properties:
> + compatible:
> + enum:
> + - adi,axi-dac-9.1.b
> +
> + reg:
> + maxItems: 1
> +
> + dmas:
> + maxItems: 1
> +
> + dma-names:
> + items:
> + - const: tx
You don't need *-names if there is only 1 entry.
> +
> + clocks:
> + maxItems: 1
> +
> + '#io-backend-cells':
> + const: 0
> +
> +required:
> + - compatible
> + - dmas
> + - reg
> + - clocks
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + dac@44a00000 {
> + compatible = "adi,axi-dac-9.1.b";
> + reg = <0x44a00000 0x10000>;
> + dmas = <&tx_dma 0>;
> + dma-names = "tx";
> + #io-backend-cells = <0>;
> + clocks = <&axi_clk>;
> + };
> +...
> diff --git a/MAINTAINERS b/MAINTAINERS
> index a7287cf44869..2137eb452376 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -1399,6 +1399,13 @@ F: sound/soc/codecs/adav*
> F: sound/soc/codecs/sigmadsp.*
> F: sound/soc/codecs/ssm*
>
> +ANALOG DEVICES INC AXI DAC DRIVER
> +M: Nuno Sa <nuno.sa@analog.com>
> +L: linux-iio@vger.kernel.org
> +S: Supported
> +W: https://ez.analog.com/linux-software-drivers
> +F: Documentation/devicetree/bindings/iio/dac/adi,axi-dac.yaml
> +
> ANALOG DEVICES INC DMA DRIVERS
> M: Lars-Peter Clausen <lars@metafoo.de>
> S: Supported
>
> --
> 2.44.0
>
next prev parent reply other threads:[~2024-04-01 13:59 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-28 13:22 [PATCH 00/10] iio: dac: support IIO backends on the output direction Nuno Sa via B4 Relay
2024-03-28 13:22 ` [PATCH 01/10] iio: buffer: add helper for setting direction Nuno Sa via B4 Relay
2024-03-28 14:36 ` Jonathan Cameron
2024-03-28 15:18 ` Nuno Sá
2024-03-28 15:54 ` Jonathan Cameron
2024-03-28 13:22 ` [PATCH 02/10] iio: buffer-dma: Rename iio_dma_buffer_data_available() Nuno Sa via B4 Relay
2024-03-28 13:22 ` [PATCH 03/10] iio: buffer-dma: Enable buffer write support Nuno Sa via B4 Relay
2024-03-28 13:22 ` [PATCH 04/10] iio: buffer-dmaengine: Support specifying buffer direction Nuno Sa via B4 Relay
2024-03-28 13:22 ` [PATCH 05/10] iio: buffer-dmaengine: Enable write support Nuno Sa via B4 Relay
2024-03-28 13:22 ` [PATCH 06/10] dt-bindings: iio: dac: add bindings doc for AXI DAC driver Nuno Sa via B4 Relay
2024-03-29 18:46 ` David Lechner
2024-04-02 7:51 ` Nuno Sá
2024-04-01 13:59 ` Rob Herring [this message]
2024-04-04 10:03 ` Nuno Sá
2024-03-28 13:22 ` [PATCH 07/10] dt-bindings: iio: dac: add bindings doc for AD9739A Nuno Sa via B4 Relay
2024-03-29 19:06 ` David Lechner
2024-03-30 18:27 ` Krzysztof Kozlowski
2024-04-02 7:49 ` Nuno Sá
2024-04-02 7:50 ` Nuno Sá
2024-04-01 14:02 ` Rob Herring
2024-03-28 13:22 ` [PATCH 08/10] iio: backend: add new functionality Nuno Sa via B4 Relay
2024-03-28 15:16 ` Jonathan Cameron
2024-03-28 15:42 ` Nuno Sá
2024-03-28 15:59 ` Jonathan Cameron
2024-03-28 16:54 ` Nuno Sá
2024-03-28 13:22 ` [PATCH 09/10] iio: dac: add support for AXI DAC IP core Nuno Sa via B4 Relay
2024-03-28 15:35 ` Jonathan Cameron
2024-03-28 16:43 ` Nuno Sá
2024-03-28 13:22 ` [PATCH 10/10] iio: dac: support the ad9739a RF DAC Nuno Sa via B4 Relay
2024-03-28 15:51 ` Jonathan Cameron
2024-03-28 16:37 ` Nuno Sá
2024-03-28 16:52 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240401135948.GA349128-robh@kernel.org \
--to=robh@kernel.org \
--cc=Michael.Hennerich@analog.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dragos.bogdan@analog.com \
--cc=jic23@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=nuno.sa@analog.com \
--cc=olivier.moysan@foss.st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).