[PATCH 2/4] arm64: dts: ti: k3-am69-sk: Fix UART pin type and macro update

[Udit Kumar <u-kumar1@ti.com>]

Along with updating J784S4 macro for pin mux instead of J721S2
fixing wkup UART RTS and TX pins as OUTPUT instead of INPUT.

Fixes: 45299dd1991b ("arm64: dts: ti: k3-am69-sk: Add mcu and wakeup uarts")
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am69-sk.dts | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am69-sk.dts b/arch/arm64/boot/dts/ti/k3-am69-sk.dts
index 50de2a448a3a..8d40a0351020 100644
--- a/arch/arm64/boot/dts/ti/k3-am69-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am69-sk.dts
@@ -517,18 +517,18 @@ J784S4_WKUP_IOPAD(0x0fc, PIN_INPUT, 7)
 	wkup_uart0_pins_default: wkup-uart0-default-pins {
 		bootph-all;
 		pinctrl-single,pins = <
-			J721S2_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (L37) WKUP_GPIO0_6.WKUP_UART0_CTSn */
-			J721S2_WKUP_IOPAD(0x074, PIN_INPUT, 0) /* (L36) WKUP_GPIO0_7.WKUP_UART0_RTSn */
-			J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (K35) WKUP_UART0_RXD */
-			J721S2_WKUP_IOPAD(0x04c, PIN_INPUT, 0) /* (K34) WKUP_UART0_TXD */
+			J784S4_WKUP_IOPAD(0x070, PIN_OUTPUT, 0) /* (L37) WKUP_UART0_CTSn */
+			J784S4_WKUP_IOPAD(0x074, PIN_INPUT, 0) /* (L36) WKUP_UART0_RTSn */
+			J784S4_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (K35) WKUP_UART0_RXD */
+			J784S4_WKUP_IOPAD(0x04c, PIN_OUTPUT, 0) /* (K34) WKUP_UART0_TXD */
 		>;
 	};
 
 	wkup_i2c0_pins_default: wkup-i2c0-default-pins {
 		bootph-all;
 		pinctrl-single,pins = <
-			J721S2_WKUP_IOPAD(0x98, PIN_INPUT, 0) /* (N33) WKUP_I2C0_SCL */
-			J721S2_WKUP_IOPAD(0x9c, PIN_INPUT, 0) /* (N35) WKUP_I2C0_SDA */
+			J784S4_WKUP_IOPAD(0x98, PIN_INPUT, 0) /* (N33) WKUP_I2C0_SCL */
+			J784S4_WKUP_IOPAD(0x9c, PIN_INPUT, 0) /* (N35) WKUP_I2C0_SDA */
 		>;
 	};
 
-- 
2.34.1