devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Rob Herring <robh@kernel.org>
To: Christophe Roullier <christophe.roullier@foss.st.com>
Cc: "David S . Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Richard Cochran <richardcochran@gmail.com>,
	Jose Abreu <joabreu@synopsys.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>,
	netdev@vger.kernel.org, devicetree@vger.kernel.org,
	linux-stm32@st-md-mailman.stormreply.com,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 01/11] dt-bindings: net: add STM32MP13 compatible in documentation for stm32
Date: Mon, 15 Apr 2024 17:27:04 -0500	[thread overview]
Message-ID: <20240415222704.GA191094-robh@kernel.org> (raw)
In-Reply-To: <20240411143658.1049706-2-christophe.roullier@foss.st.com>

On Thu, Apr 11, 2024 at 04:36:48PM +0200, Christophe Roullier wrote:
> New STM32 SOC have 2 GMACs instances.
> GMAC IP version is SNPS 4.20.
> 
> Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
> ---
>  .../devicetree/bindings/net/stm32-dwmac.yaml  | 80 +++++++++++++++++--
>  1 file changed, 72 insertions(+), 8 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
> index 857d58949b029..20f58eff6e6f9 100644
> --- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
> +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
> @@ -22,18 +22,17 @@ select:
>          enum:
>            - st,stm32-dwmac
>            - st,stm32mp1-dwmac
> +          - st,stm32mp13-dwmac
>    required:
>      - compatible
>  
> -allOf:
> -  - $ref: snps,dwmac.yaml#
> -
>  properties:
>    compatible:
>      oneOf:
>        - items:
>            - enum:
>                - st,stm32mp1-dwmac
> +              - st,stm32mp13-dwmac
>            - const: snps,dwmac-4.20a
>        - items:
>            - enum:
> @@ -74,13 +73,16 @@ properties:
>  
>    st,syscon:
>      $ref: /schemas/types.yaml#/definitions/phandle-array
> -    items:
> -      - items:

It is subtle, but the '-' there was significant...

> -          - description: phandle to the syscon node which encompases the glue register
> -          - description: offset of the control register
>      description:
>        Should be phandle/offset pair. The phandle to the syscon node which
> -      encompases the glue register, and the offset of the control register
> +      encompases the glue register, the offset of the control register and
> +      the mask to set bitfield in control register
> +    items:
> +      minItems: 2
> +      items:

Now you removed it, so any number of <phandle offset mask> are allowed. 
You need:

items:
  - minItems: 2
    items:
      - ...


> +        - description: phandle to the syscon node which encompases the glue register
> +        - description: offset of the control register
> +        - description: field to set mask in register
>  
>    st,ext-phyclk:
>      description:
> @@ -108,6 +110,34 @@ required:
>  
>  unevaluatedProperties: false
>  
> +allOf:
> +  - $ref: snps,dwmac.yaml#
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - st,stm32mp1-dwmac
> +              - st,stm32-dwmac
> +    then:
> +      properties:
> +        st,syscon:
> +          items:
> +            minItems: 2

You mean 'maxItems: 2' as 2 is already the min.

> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - st,stm32mp13-dwmac
> +    then:
> +      properties:
> +        st,syscon:
> +          items:
> +            minItems: 3
> +
> +
>  examples:
>    - |
>      #include <dt-bindings/interrupt-controller/arm-gic.h>
> @@ -168,3 +198,37 @@ examples:
>             snps,pbl = <8>;
>             phy-mode = "mii";
>         };
> +
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/clock/stm32mp1-clks.h>
> +    #include <dt-bindings/reset/stm32mp1-resets.h>
> +    #include <dt-bindings/mfd/stm32h7-rcc.h>
> +    //Example 4

Not a useful comment.

> +     ethernet3: ethernet@5800a000 {
> +           compatible = "st,stm32mp13-dwmac", "snps,dwmac-4.20a";
> +           reg = <0x5800a000 0x2000>;
> +           reg-names = "stmmaceth";
> +           interrupts-extended = <&intc GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
> +                                 <&exti 68 IRQ_TYPE_LEVEL_HIGH>;
> +           interrupt-names = "macirq",
> +                             "eth_wake_irq";
> +           clock-names = "stmmaceth",
> +                         "mac-clk-tx",
> +                         "mac-clk-rx",
> +                         "eth-ck",
> +                         "ptp_ref",
> +                         "ethstp";
> +           clocks = <&rcc ETHMAC>,
> +                    <&rcc ETHTX>,
> +                    <&rcc ETHRX>,
> +                    <&rcc ETHCK_K>,
> +                    <&rcc ETHPTP_K>,
> +                    <&rcc ETHSTP>;
> +           st,syscon = <&syscfg 0x4 0xff0000>;
> +           snps,mixed-burst;
> +           snps,pbl = <2>;
> +           snps,axi-config = <&stmmac_axi_config_1>;
> +           snps,tso;
> +           phy-mode = "rmii";
> +     };
> -- 
> 2.25.1
> 

  reply	other threads:[~2024-04-15 22:27 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-04-11 14:36 [PATCH 00/11] Series to deliver Ethernets for STM32MP13 Christophe Roullier
2024-04-11 14:36 ` [PATCH 01/11] dt-bindings: net: add STM32MP13 compatible in documentation for stm32 Christophe Roullier
2024-04-15 22:27   ` Rob Herring [this message]
2024-04-11 14:36 ` [PATCH 02/11] dt-bindings: net: add phy-supply property " Christophe Roullier
2024-04-12 16:15   ` Rob Herring
2024-04-11 14:36 ` [PATCH 03/11] net: ethernet: stmmac: rework glue to simplify management for next stm32 Christophe Roullier
2024-04-18  8:17   ` Serge Semin
2024-04-11 14:36 ` [PATCH 04/11] net: ethernet: stmmac: add management of stm32mp13 for stm32 Christophe Roullier
2024-04-11 14:36 ` [PATCH 05/11] net: ethernet: stmmac: stm32: update config management for phy wo cristal Christophe Roullier
2024-04-11 14:36 ` [PATCH 06/11] net: ethernet: stm32: clean the way to manage wol irqwake Christophe Roullier
2024-04-11 14:36 ` [PATCH 07/11] net: ethernet: stmmac: stm32: support the phy-supply regulator binding Christophe Roullier
2024-04-11 14:36 ` [PATCH 08/11] ARM: dts: stm32: add ethernet1 and ethernet2 support on stm32mp13 Christophe Roullier
2024-04-11 14:36 ` [PATCH 09/11] ARM: dts: stm32: add ethernet1/2 RMII pins for STM32MP13F-DK board Christophe Roullier
2024-04-11 14:36 ` [PATCH 10/11] ARM: dts: stm32: add ethernet1 and ethernet2 for STM32MP135F-DK board Christophe Roullier
2024-04-11 14:36 ` [PATCH 11/11] ARM: multi_v7_defconfig: Add MCP23S08 pinctrl support Christophe Roullier
2024-04-12 13:46 ` [PATCH 00/11] Series to deliver Ethernets for STM32MP13 Rob Herring
2024-04-15 16:56   ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240415222704.GA191094-robh@kernel.org \
    --to=robh@kernel.org \
    --cc=alexandre.torgue@foss.st.com \
    --cc=broonie@kernel.org \
    --cc=christophe.roullier@foss.st.com \
    --cc=conor+dt@kernel.org \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@google.com \
    --cc=joabreu@synopsys.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=kuba@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=richardcochran@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).