Re: [PATCH 3/8] dt-bindings: adc: axi-adc: add clocks property

[Jonathan Cameron <jic23@kernel.org>]

On Fri, 19 Apr 2024 17:36:46 +0200
Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@kernel.org> wrote:

> From: Nuno Sa <nuno.sa@analog.com>
> 
> Add a required clock property as we can't access the device registers if
> the AXI bus clock is not properly enabled.
> 
> Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Fix, or doesn't matter until this series?

Obviously should have been in the binding anyway, but whether
it matters already affects whether this should go to stable or not.

Jonathan

> ---
>  Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml b/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
> index 3d49d21ad33df..e1f450b80db27 100644
> --- a/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
> @@ -28,6 +28,9 @@ properties:
>    reg:
>      maxItems: 1
>  
> +  clocks:
> +    maxItems: 1
> +
>    dmas:
>      maxItems: 1
>  
> @@ -48,6 +51,7 @@ required:
>    - compatible
>    - dmas
>    - reg
> +  - clocks
>  
>  additionalProperties: false
>  
> @@ -58,6 +62,7 @@ examples:
>          reg = <0x44a00000 0x10000>;
>          dmas = <&rx_dma 0>;
>          dma-names = "rx";
> +        clocks = <&axi_clk>;
>          #io-backend-cells = <0>;
>      };
>  ...
>