[PATCH v2 5/6] iio: light: stk3310: log error if reading the chip id fails

[Aren Moynihan <aren@peacevolution.org>]

If the chip isn't powered, this call is likely to return an error.
Without a log here the driver will silently fail to probe. Common errors
are ENXIO (when the chip isn't powered) and ETIMEDOUT (when the i2c bus
isn't powered).

Signed-off-by: Aren Moynihan <aren@peacevolution.org>
---

Notes:
    Changes in v2:
     - use dev_err_probe

 drivers/iio/light/stk3310.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iio/light/stk3310.c b/drivers/iio/light/stk3310.c
index c56c6298d292..6ee6f145a6d5 100644
--- a/drivers/iio/light/stk3310.c
+++ b/drivers/iio/light/stk3310.c
@@ -475,7 +475,7 @@ static int stk3310_init(struct iio_dev *indio_dev)
 
 	ret = regmap_read(data->regmap, STK3310_REG_ID, &chipid);
 	if (ret < 0)
-		return ret;
+		return dev_err_probe(&client->dev, ret, "failed to read chip id\n");
 
 	if (chipid != STK3310_CHIP_ID_VAL &&
 	    chipid != STK3311_CHIP_ID_VAL &&
-- 
2.44.0