From: Ryan Walklin <ryan@testtoast.com>
To: Andre Przywara <andre.przywara@arm.com>,
Chen-Yu Tsai <wens@csie.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Samuel Holland <samuel@sholland.org>,
Chris Morgan <macromorgan@hotmail.com>
Cc: devicetree@vger.kernel.org, linux-sunxi@lists.linux.dev,
Ryan Walklin <ryan@testtoast.com>
Subject: [PATCH v4 3/4] arm64: dts: allwinner: h700: Add RG35XX-Plus DTS
Date: Fri, 26 Apr 2024 21:51:41 +1200 [thread overview]
Message-ID: <20240426095141.13602-5-ryan@testtoast.com> (raw)
In-Reply-To: <20240426095141.13602-2-ryan@testtoast.com>
The RG35XX-Plus adds a RTL8221CS SDIO Wifi/BT chip to the RG35XX (2024).
Enabled in this DTS:
- WiFi
- Bluetooth
- Supporting power sequence and GPIOs
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
---
Changelog v1..v2:
- Update copyright
- Spaces -> Tabs
- Remove redundant &uart0 node and DTS version tag
- Add GPIO bank comments
- Use generic pwrseq name
Changelog v2..v3:
- Add DTB to Makefile
- Correct Wifi vqmmc-supply to ALDO4
- Move changelog below fold-line
Changelog v3..v4:
- Fix sdio_wifi node indent
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
---
arch/arm64/boot/dts/allwinner/Makefile | 1 +
.../sun50i-h700-anbernic-rg35xx-plus.dts | 53 +++++++++++++++++++
2 files changed, 54 insertions(+)
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-plus.dts
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index 6f997157968e..4217328b1889 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -48,3 +48,4 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-orangepi-zero2w.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-orangepi-zero3.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-transpeed-8k618-t.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-2024.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-plus.dtb
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-plus.dts
new file mode 100644
index 000000000000..60a8e4922103
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-plus.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright (C) 2024 Ryan Walklin <ryan@testtoast.com>.
+ */
+
+#include "sun50i-h700-anbernic-rg35xx-2024.dts"
+
+/ {
+ model = "Anbernic RG35XX Plus";
+ compatible = "anbernic,rg35xx-plus", "allwinner,sun50i-h700";
+
+ wifi_pwrseq: pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
+ clock-names = "ext_clock";
+ pinctrl-0 = <&x32clk_fanout_pin>;
+ pinctrl-names = "default";
+ post-power-on-delay-ms = <200>;
+ reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */
+ };
+};
+
+/* SDIO WiFi RTL8821CS */
+&mmc1 {
+ vmmc-supply = <®_cldo4>;
+ vqmmc-supply = <®_aldo4>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ sdio_wifi: wifi@1 {
+ reg = <1>;
+ interrupt-parent = <&pio>;
+ interrupts = <6 15 IRQ_TYPE_LEVEL_LOW>; /* PG15 */
+ interrupt-names = "host-wake";
+ };
+};
+
+/* Bluetooth RTL8821CS */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt";
+ device-wake-gpios = <&pio 6 17 GPIO_ACTIVE_HIGH>; /* PG17 */
+ enable-gpios = <&pio 6 19 GPIO_ACTIVE_HIGH>; /* PG19 */
+ host-wake-gpios = <&pio 6 16 GPIO_ACTIVE_HIGH>; /* PG16 */
+ };
+};
--
2.44.0
next prev parent reply other threads:[~2024-04-26 9:53 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-26 9:51 [PATCH v4 0/4] arm64: dts: allwinner: Add Anbernic RG35XX (Plus/H/2024) support Ryan Walklin
2024-04-26 9:51 ` [PATCH v4 1/4] dt-bindings: arm: sunxi: document Anbernic RG35XX handheld gaming device variants Ryan Walklin
2024-04-26 9:51 ` [PATCH v4 2/4] arm64: dts: allwinner: h700: Add RG35XX 2024 DTS Ryan Walklin
2024-04-26 10:42 ` Andre Przywara
2024-04-26 16:00 ` Jernej Škrabec
2024-04-26 9:51 ` Ryan Walklin [this message]
2024-04-26 16:05 ` [PATCH v4 3/4] arm64: dts: allwinner: h700: Add RG35XX-Plus DTS Jernej Škrabec
2024-04-26 9:51 ` [PATCH v4 4/4] arm64: dts: allwinner: h700: Add RG35XX-H DTS Ryan Walklin
2024-04-26 16:07 ` Jernej Škrabec
2024-04-26 16:16 ` [PATCH v4 0/4] arm64: dts: allwinner: Add Anbernic RG35XX (Plus/H/2024) support Jernej Škrabec
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240426095141.13602-5-ryan@testtoast.com \
--to=ryan@testtoast.com \
--cc=andre.przywara@arm.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jernej.skrabec@gmail.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=macromorgan@hotmail.com \
--cc=robh@kernel.org \
--cc=samuel@sholland.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).