[PATCH 10/12] arm64: dts: qcom: sm8650-mtp: connect USB-C SS port to QMP PHY

[Dmitry Baryshkov <dmitry.baryshkov@linaro.org>]

The lanes from the USB-C SS port are connected to the combo USB+DP QMP
PHY rather than the SS port of the USB controller. Move the connection
endpoint to the QMP PHY out port.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8650-mtp.dts | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
index d04ceaa73c2b..819f6eadba07 100644
--- a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
@@ -59,7 +59,7 @@ port@1 {
 					reg = <1>;
 
 					pmic_glink_ss_in: endpoint {
-						remote-endpoint = <&usb_1_dwc3_ss>;
+						remote-endpoint = <&usb_dp_qmpphy_out>;
 					};
 				};
 			};
@@ -853,10 +853,6 @@ &usb_1_dwc3_hs {
 	remote-endpoint = <&pmic_glink_hs_in>;
 };
 
-&usb_1_dwc3_ss {
-	remote-endpoint = <&pmic_glink_ss_in>;
-};
-
 &usb_1_hsphy {
 	vdd-supply = <&vreg_l1i_0p88>;
 	vdda12-supply = <&vreg_l3i_1p2>;
@@ -873,6 +869,10 @@ &usb_dp_qmpphy {
 	status = "okay";
 };
 
+&usb_dp_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss_in>;
+};
+
 &xo_board {
 	clock-frequency = <76800000>;
 };

-- 
2.39.2