From: Andre Przywara <andre.przywara@arm.com>
To: Dragan Simic <dsimic@manjaro.org>
Cc: linux-sunxi@lists.linux.dev, wens@csie.org,
jernej.skrabec@gmail.com, samuel@sholland.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] arm64: dts: allwinner: Add cache information to the SoC dtsi for H6
Date: Tue, 30 Apr 2024 00:10:02 +0100 [thread overview]
Message-ID: <20240430001002.4797e4e3@minigeek.lan> (raw)
In-Reply-To: <49abb93000078c692c48c0a65ff677893909361a.1714304071.git.dsimic@manjaro.org>
On Sun, 28 Apr 2024 13:40:36 +0200
Dragan Simic <dsimic@manjaro.org> wrote:
> Add missing cache information to the Allwinner H6 SoC dtsi, to allow
> the userspace, which includes lscpu(1) that uses the virtual files provided
> by the kernel under the /sys/devices/system/cpu directory, to display the
> proper H6 cache information.
>
> Adding the cache information to the H6 SoC dtsi also makes the following
> warning message in the kernel log go away:
>
> cacheinfo: Unable to detect cache hierarchy for CPU 0
>
> The cache parameters for the H6 dtsi were obtained and partially derived
> by hand from the cache size and layout specifications found in the following
> datasheets and technical reference manuals:
>
> - Allwinner H6 V200 datasheet, version 1.1
> - ARM Cortex-A53 revision r0p3 TRM, version E
>
> For future reference, here's a brief summary of the documentation:
>
> - All caches employ the 64-byte cache line length
> - Each Cortex-A53 core has 32 KB of L1 2-way, set-associative instruction
> cache and 32 KB of L1 4-way, set-associative data cache
> - The entire SoC has 512 KB of unified L2 16-way, set-associative cache
>
> Signed-off-by: Dragan Simic <dsimic@manjaro.org>
I can confirm that the data below matches the manuals, but also the
decoding of the architectural cache type registers (CCSIDR_EL1):
L1D: 32 KB: 128 sets, 4 way associative, 64 bytes/line
L1I: 32 KB: 256 sets, 2 way associative, 64 bytes/line
L2: 512 KB: 512 sets, 16 way associative, 64 bytes/line
tinymembench results for the H6 are available here:
https://github.com/ThomasKaiser/sbc-bench/blob/master/results/26Ph.txt
and confirm the theory. Also ran it locally with similar results.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Thanks,
Andre
> ---
> arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 37 ++++++++++++++++++++
> 1 file changed, 37 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> index d11e5041bae9..1a63066396e8 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> @@ -29,36 +29,73 @@ cpu0: cpu@0 {
> clocks = <&ccu CLK_CPUX>;
> clock-latency-ns = <244144>; /* 8 32k periods */
> #cooling-cells = <2>;
> + i-cache-size = <0x8000>;
> + i-cache-line-size = <64>;
> + i-cache-sets = <256>;
> + d-cache-size = <0x8000>;
> + d-cache-line-size = <64>;
> + d-cache-sets = <128>;
> + next-level-cache = <&l2_cache>;
> };
>
> cpu1: cpu@1 {
> compatible = "arm,cortex-a53";
> device_type = "cpu";
> reg = <1>;
> enable-method = "psci";
> clocks = <&ccu CLK_CPUX>;
> clock-latency-ns = <244144>; /* 8 32k periods */
> #cooling-cells = <2>;
> + i-cache-size = <0x8000>;
> + i-cache-line-size = <64>;
> + i-cache-sets = <256>;
> + d-cache-size = <0x8000>;
> + d-cache-line-size = <64>;
> + d-cache-sets = <128>;
> + next-level-cache = <&l2_cache>;
> };
>
> cpu2: cpu@2 {
> compatible = "arm,cortex-a53";
> device_type = "cpu";
> reg = <2>;
> enable-method = "psci";
> clocks = <&ccu CLK_CPUX>;
> clock-latency-ns = <244144>; /* 8 32k periods */
> #cooling-cells = <2>;
> + i-cache-size = <0x8000>;
> + i-cache-line-size = <64>;
> + i-cache-sets = <256>;
> + d-cache-size = <0x8000>;
> + d-cache-line-size = <64>;
> + d-cache-sets = <128>;
> + next-level-cache = <&l2_cache>;
> };
>
> cpu3: cpu@3 {
> compatible = "arm,cortex-a53";
> device_type = "cpu";
> reg = <3>;
> enable-method = "psci";
> clocks = <&ccu CLK_CPUX>;
> clock-latency-ns = <244144>; /* 8 32k periods */
> #cooling-cells = <2>;
> + i-cache-size = <0x8000>;
> + i-cache-line-size = <64>;
> + i-cache-sets = <256>;
> + d-cache-size = <0x8000>;
> + d-cache-line-size = <64>;
> + d-cache-sets = <128>;
> + next-level-cache = <&l2_cache>;
> + };
> +
> + l2_cache: l2-cache {
> + compatible = "cache";
> + cache-level = <2>;
> + cache-unified;
> + cache-size = <0x80000>;
> + cache-line-size = <64>;
> + cache-sets = <512>;
> };
> };
>
>
next prev parent reply other threads:[~2024-04-29 23:10 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-28 11:40 [PATCH] arm64: dts: allwinner: Add cache information to the SoC dtsi for A64 Dragan Simic
2024-04-28 11:40 ` [PATCH] arm64: dts: allwinner: Add cache information to the SoC dtsi for H6 Dragan Simic
2024-04-28 16:21 ` Jernej Škrabec
2024-04-29 23:10 ` Andre Przywara [this message]
2024-04-30 0:01 ` Dragan Simic
2024-04-30 10:46 ` Andre Przywara
2024-04-30 11:10 ` Dragan Simic
2024-05-01 9:30 ` Andre Przywara
2024-05-03 9:13 ` Dragan Simic
2024-05-28 15:46 ` Chen-Yu Tsai
2024-05-28 15:56 ` Chen-Yu Tsai
2024-05-28 16:02 ` Dragan Simic
2024-05-28 16:06 ` Chen-Yu Tsai
2024-05-28 16:17 ` Chen-Yu Tsai
2024-05-28 16:10 ` Chen-Yu Tsai
2024-04-28 16:19 ` [PATCH] arm64: dts: allwinner: Add cache information to the SoC dtsi for A64 Jernej Škrabec
2024-04-29 10:33 ` Andre Przywara
2024-04-29 13:51 ` Dragan Simic
2024-05-28 16:10 ` Chen-Yu Tsai
2024-05-28 16:16 ` Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240430001002.4797e4e3@minigeek.lan \
--to=andre.przywara@arm.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dsimic@manjaro.org \
--cc=jernej.skrabec@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=robh@kernel.org \
--cc=samuel@sholland.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).