From: Alexandru Gagniuc <mr.nuke.me@gmail.com>
To: "Bjorn Andersson" <andersson@kernel.org>,
"Konrad Dybcio" <konrad.dybcio@linaro.org>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"Krzysztof Wilczyński" <kw@linux.com>,
"Rob Herring" <robh@kernel.org>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Vinod Koul" <vkoul@kernel.org>,
"Kishon Vijay Abraham I" <kishon@kernel.org>,
"Michael Turquette" <mturquette@baylibre.com>,
"Stephen Boyd" <sboyd@kernel.org>,
"Manivannan Sadhasivam" <manivannan.sadhasivam@linaro.org>,
linux-arm-msm@vger.kernel.org, linux-pci@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-phy@lists.infradead.org, linux-clk@vger.kernel.org
Cc: Alexandru Gagniuc <mr.nuke.me@gmail.com>,
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Subject: [PATCH v4 RESEND 2/8] clk: qcom: gcc-ipq9574: Add PCIe pipe clocks
Date: Tue, 30 Apr 2024 23:28:41 -0500 [thread overview]
Message-ID: <20240501042847.1545145-3-mr.nuke.me@gmail.com> (raw)
In-Reply-To: <20240501042847.1545145-1-mr.nuke.me@gmail.com>
The IPQ9574 has four PCIe "pipe" clocks. These clocks are required by
PCIe PHYs. Port the pipe clocks from the downstream 5.4 kernel.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
drivers/clk/qcom/gcc-ipq9574.c | 76 ++++++++++++++++++++++++++++++++++
1 file changed, 76 insertions(+)
diff --git a/drivers/clk/qcom/gcc-ipq9574.c b/drivers/clk/qcom/gcc-ipq9574.c
index 0a3f846695b8..bc3e17f34295 100644
--- a/drivers/clk/qcom/gcc-ipq9574.c
+++ b/drivers/clk/qcom/gcc-ipq9574.c
@@ -1569,6 +1569,24 @@ static struct clk_regmap_phy_mux pcie0_pipe_clk_src = {
},
};
+static struct clk_branch gcc_pcie0_pipe_clk = {
+ .halt_reg = 0x28044,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x28044,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "gcc_pcie0_pipe_clk",
+ .parent_hws = (const struct clk_hw *[]) {
+ &pcie0_pipe_clk_src.clkr.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct clk_regmap_phy_mux pcie1_pipe_clk_src = {
.reg = 0x29064,
.clkr = {
@@ -1583,6 +1601,24 @@ static struct clk_regmap_phy_mux pcie1_pipe_clk_src = {
},
};
+static struct clk_branch gcc_pcie1_pipe_clk = {
+ .halt_reg = 0x29044,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x29044,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "gcc_pcie1_pipe_clk",
+ .parent_hws = (const struct clk_hw *[]) {
+ &pcie1_pipe_clk_src.clkr.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct clk_regmap_phy_mux pcie2_pipe_clk_src = {
.reg = 0x2a064,
.clkr = {
@@ -1597,6 +1633,24 @@ static struct clk_regmap_phy_mux pcie2_pipe_clk_src = {
},
};
+static struct clk_branch gcc_pcie2_pipe_clk = {
+ .halt_reg = 0x2a044,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x2a044,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "gcc_pcie2_pipe_clk",
+ .parent_hws = (const struct clk_hw *[]) {
+ &pcie2_pipe_clk_src.clkr.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct clk_regmap_phy_mux pcie3_pipe_clk_src = {
.reg = 0x2b064,
.clkr = {
@@ -1611,6 +1665,24 @@ static struct clk_regmap_phy_mux pcie3_pipe_clk_src = {
},
};
+static struct clk_branch gcc_pcie3_pipe_clk = {
+ .halt_reg = 0x2b044,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x2b044,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "gcc_pcie3_pipe_clk",
+ .parent_hws = (const struct clk_hw *[]) {
+ &pcie3_pipe_clk_src.clkr.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static const struct freq_tbl ftbl_pcie_rchng_clk_src[] = {
F(24000000, P_XO, 1, 0, 0),
F(100000000, P_GPLL0, 8, 0, 0),
@@ -4141,6 +4213,10 @@ static struct clk_regmap *gcc_ipq9574_clks[] = {
[GCC_SNOC_PCIE1_1LANE_S_CLK] = &gcc_snoc_pcie1_1lane_s_clk.clkr,
[GCC_SNOC_PCIE2_2LANE_S_CLK] = &gcc_snoc_pcie2_2lane_s_clk.clkr,
[GCC_SNOC_PCIE3_2LANE_S_CLK] = &gcc_snoc_pcie3_2lane_s_clk.clkr,
+ [GCC_PCIE0_PIPE_CLK] = &gcc_pcie0_pipe_clk.clkr,
+ [GCC_PCIE1_PIPE_CLK] = &gcc_pcie1_pipe_clk.clkr,
+ [GCC_PCIE2_PIPE_CLK] = &gcc_pcie2_pipe_clk.clkr,
+ [GCC_PCIE3_PIPE_CLK] = &gcc_pcie3_pipe_clk.clkr,
};
static const struct qcom_reset_map gcc_ipq9574_resets[] = {
--
2.40.1
next prev parent reply other threads:[~2024-05-01 4:29 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-01 4:28 [PATCH v4 RESEND 0/8] ipq9574: Enable PCI-Express support Alexandru Gagniuc
2024-05-01 4:28 ` [PATCH v4 RESEND 1/8] dt-bindings: clock: Add PCIe pipe related clocks for IPQ9574 Alexandru Gagniuc
2024-05-01 4:28 ` Alexandru Gagniuc [this message]
2024-05-01 4:28 ` [PATCH v4 RESEND 3/8] dt-bindings: PCI: qcom: Add IPQ9574 PCIe controller Alexandru Gagniuc
2024-05-01 4:28 ` [PATCH v4 RESEND 4/8] PCI: qcom: Switch to devm_clk_bulk_get_all() API to get the clocks from Devicetree Alexandru Gagniuc
2024-05-11 6:35 ` Manivannan Sadhasivam
2024-05-14 7:51 ` Manivannan Sadhasivam
2024-05-01 4:28 ` [PATCH v4 RESEND 5/8] PCI: qcom: Add support for IPQ9574 Alexandru Gagniuc
2024-05-01 10:21 ` Krzysztof Kozlowski
2024-05-01 15:43 ` mr.nuke.me
2024-05-01 16:43 ` Krzysztof Kozlowski
2024-05-11 6:39 ` Manivannan Sadhasivam
2024-05-01 4:28 ` [PATCH v4 RESEND 6/8] dt-bindings: phy: qcom,ipq8074-qmp-pcie: add ipq9574 gen3x2 PHY Alexandru Gagniuc
2024-05-01 4:28 ` [PATCH v4 RESEND 7/8] phy: qcom-qmp-pcie: add support for " Alexandru Gagniuc
2024-05-01 4:28 ` [PATCH v4 RESEND 8/8] arm64: dts: qcom: ipq9574: add PCIe2 and PCIe3 nodes Alexandru Gagniuc
2024-05-01 20:32 ` Alex G.
2024-05-01 10:22 ` [PATCH v4 RESEND 0/8] ipq9574: Enable PCI-Express support Krzysztof Kozlowski
2024-05-01 15:37 ` mr.nuke.me
2024-05-08 6:16 ` Devi Priya
2024-05-08 17:10 ` mr.nuke.me
2024-05-12 8:35 ` Devi Priya
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240501042847.1545145-3-mr.nuke.me@gmail.com \
--to=mr.nuke.me@gmail.com \
--cc=andersson@kernel.org \
--cc=bhelgaas@google.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=kishon@kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzk+dt@kernel.org \
--cc=kw@linux.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=lpieralisi@kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=mturquette@baylibre.com \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).