[PATCH v4 2/9] arm64: dts: qcom: sc8180x: correct dispcc clocks

[Dmitry Baryshkov <dmitry.baryshkov@linaro.org>]

Correct the clocks being used by the display clock controller on the
SC8180X platform (to match the schema):
- Drop the sleep clock
- Add DSI clocks
- Reorder eDP / DP clocks

This changes the order of clocks, however it should be noted that the
clock list was neither correct nor followed the schema beforehand.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/sc8180x.dtsi | 22 ++++++++++++++--------
 1 file changed, 14 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
index 067712310560..b92b6fb73057 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
@@ -3308,21 +3308,27 @@ dispcc: clock-controller@af00000 {
 			compatible = "qcom,sc8180x-dispcc";
 			reg = <0 0x0af00000 0 0x20000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
-				 <&sleep_clk>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi1_phy 0>,
+				 <&mdss_dsi1_phy 1>,
 				 <&usb_prim_dpphy 0>,
 				 <&usb_prim_dpphy 1>,
-				 <&usb_sec_dpphy 0>,
-				 <&usb_sec_dpphy 1>,
 				 <&edp_phy 0>,
-				 <&edp_phy 1>;
+				 <&edp_phy 1>,
+				 <&usb_sec_dpphy 0>,
+				 <&usb_sec_dpphy 1>;
 			clock-names = "bi_tcxo",
-				      "sleep_clk",
+				      "dsi0_phy_pll_out_byteclk",
+				      "dsi0_phy_pll_out_dsiclk",
+				      "dsi1_phy_pll_out_byteclk",
+				      "dsi1_phy_pll_out_dsiclk",
 				      "dp_phy_pll_link_clk",
 				      "dp_phy_pll_vco_div_clk",
-				      "dptx1_phy_pll_link_clk",
-				      "dptx1_phy_pll_vco_div_clk",
 				      "edp_phy_pll_link_clk",
-				      "edp_phy_pll_vco_div_clk";
+				      "edp_phy_pll_vco_div_clk",
+				      "dptx1_phy_pll_link_clk",
+				      "dptx1_phy_pll_vco_div_clk";
 			power-domains = <&rpmhpd SC8180X_MMCX>;
 			required-opps = <&rpmhpd_opp_low_svs>;
 			#clock-cells = <1>;

-- 
2.39.2