[PATCH v4 8/9] arm64: dts: qcom: x1e80100: describe USB signals properly

[Dmitry Baryshkov <dmitry.baryshkov@linaro.org>]

Follow example of other platforms. Rename HS graph nodes to contain
'dwc3_hs' and link SS lanes from DWC3 controllers to QMP PHYs.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/x1e80100.dtsi | 149 +++++++++++++++++++++++++++++++--
 1 file changed, 141 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
index 5f90a0b3c016..cf8d8d5b1870 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
@@ -2543,6 +2543,33 @@ usb_1_ss0_qmpphy: phy@fd5000 {
 			#phy-cells = <1>;
 
 			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_1_ss0_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_1_ss0_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_dwc3_ss>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_1_ss0_qmpphy_dp_in: endpoint {
+					};
+				};
+			};
 		};
 
 		usb_1_ss1_hsphy: phy@fd9000 {
@@ -2583,6 +2610,33 @@ usb_1_ss1_qmpphy: phy@fda000 {
 			#phy-cells = <1>;
 
 			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_1_ss1_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_1_ss1_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_dwc3_ss>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_1_ss1_qmpphy_dp_in: endpoint {
+					};
+				};
+			};
 		};
 
 		usb_1_ss2_hsphy: phy@fde000 {
@@ -2623,6 +2677,33 @@ usb_1_ss2_qmpphy: phy@fdf000 {
 			#phy-cells = <1>;
 
 			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_1_ss2_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_1_ss2_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_1_ss2_dwc3_ss>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_1_ss2_qmpphy_dp_in: endpoint {
+					};
+				};
+			};
 		};
 
 		cnoc_main: interconnect@1500000 {
@@ -3445,8 +3526,23 @@ usb_1_ss2_dwc3: usb@a000000 {
 
 				dma-coherent;
 
-				port {
-					usb_1_ss2_role_switch: endpoint {
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_ss2_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_ss2_dwc3_ss: endpoint {
+							remote-endpoint = <&usb_1_ss2_qmpphy_usb_ss_in>;
+						};
 					};
 				};
 			};
@@ -3514,8 +3610,15 @@ usb_2_dwc3: usb@a200000 {
 				phy-names = "usb2-phy";
 				maximum-speed = "high-speed";
 
-				port {
-					usb_2_role_switch: endpoint {
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_2_dwc3_hs: endpoint {
+						};
 					};
 				};
 			};
@@ -3590,8 +3693,23 @@ usb_1_ss0_dwc3: usb@a600000 {
 
 				dma-coherent;
 
-				port {
-					usb_1_ss0_role_switch: endpoint {
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_ss0_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_ss0_dwc3_ss: endpoint {
+							remote-endpoint = <&usb_1_ss0_qmpphy_usb_ss_in>;
+						};
 					};
 				};
 			};
@@ -3673,8 +3791,23 @@ usb_1_ss1_dwc3: usb@a800000 {
 
 				dma-coherent;
 
-				port {
-					usb_1_ss1_role_switch: endpoint {
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_ss1_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_ss1_dwc3_ss: endpoint {
+							remote-endpoint = <&usb_1_ss1_qmpphy_usb_ss_in>;
+						};
 					};
 				};
 			};

-- 
2.39.2