From: Elliot Berman <quic_eberman@quicinc.com>
To: Rob Herring <robh+dt@kernel.org>,
Frank Rowand <frowand.list@gmail.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Amrit Anand <quic_amrianan@quicinc.com>,
Peter Griffin <peter.griffin@linaro.org>,
Caleb Connolly <caleb.connolly@linaro.org>,
"Andy Gross" <agross@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
"Doug Anderson" <dianders@chromium.org>,
Simon Glass <sjg@chromium.org>,
"Chen-Yu Tsai" <wenst@chromium.org>,
Julius Werner <jwerner@chromium.org>,
"Humphreys, Jonathan" <j-humphreys@ti.com>,
Sumit Garg <sumit.garg@linaro.org>,
"Jon Hunter" <jonathanh@nvidia.org>,
Michal Simek <michal.simek@amd.com>,
<boot-architecture@lists.linaro.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-arm-msm@vger.kernel.org>,
Elliot Berman <quic_eberman@quicinc.com>
Subject: [PATCH RFC v3 7/9] arm64: boot: dts: qcom: Use phandles for thermal_zones
Date: Tue, 21 May 2024 11:38:04 -0700 [thread overview]
Message-ID: <20240521-board-ids-v3-7-e6c71d05f4d2@quicinc.com> (raw)
In-Reply-To: <20240521-board-ids-v3-0-e6c71d05f4d2@quicinc.com>
In preparation for converting sm8550 to use devicetree overlays, use
phandles for thermal_zones.
Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
---
arch/arm64/boot/dts/qcom/pm8010.dtsi | 62 ++++++++--------
arch/arm64/boot/dts/qcom/pm8550.dtsi | 32 ++++----
arch/arm64/boot/dts/qcom/pm8550b.dtsi | 36 +++++----
arch/arm64/boot/dts/qcom/pm8550ve.dtsi | 38 +++++-----
arch/arm64/boot/dts/qcom/pm8550vs.dtsi | 128 ++++++++++++++++----------------
arch/arm64/boot/dts/qcom/pmr735d_a.dtsi | 38 +++++-----
arch/arm64/boot/dts/qcom/pmr735d_b.dtsi | 38 +++++-----
arch/arm64/boot/dts/qcom/sm8550.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sm8650.dtsi | 2 +-
9 files changed, 181 insertions(+), 195 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/pm8010.dtsi b/arch/arm64/boot/dts/qcom/pm8010.dtsi
index 0ea641e12209..a889df2f2f25 100644
--- a/arch/arm64/boot/dts/qcom/pm8010.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8010.dtsi
@@ -6,47 +6,45 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
-/ {
- thermal-zones {
- pm8010-m-thermal {
- polling-delay-passive = <100>;
- polling-delay = <0>;
+&thermal_zones {
+ pm8010-m-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;
- thermal-sensors = <&pm8010_m_temp_alarm>;
+ thermal-sensors = <&pm8010_m_temp_alarm>;
- trips {
- trip0 {
- temperature = <95000>;
- hysteresis = <0>;
- type = "passive";
- };
+ trips {
+ trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
- trip1 {
- temperature = <115000>;
- hysteresis = <0>;
- type = "hot";
- };
+ trip1 {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "hot";
};
};
+ };
- pm8010-n-thermal {
- polling-delay-passive = <100>;
- polling-delay = <0>;
+ pm8010-n-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;
- thermal-sensors = <&pm8010_n_temp_alarm>;
+ thermal-sensors = <&pm8010_n_temp_alarm>;
- trips {
- trip0 {
- temperature = <95000>;
- hysteresis = <0>;
- type = "passive";
- };
+ trips {
+ trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
- trip1 {
- temperature = <115000>;
- hysteresis = <0>;
- type = "hot";
- };
+ trip1 {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "hot";
};
};
};
diff --git a/arch/arm64/boot/dts/qcom/pm8550.dtsi b/arch/arm64/boot/dts/qcom/pm8550.dtsi
index 797a18c249a4..cb5e70b28445 100644
--- a/arch/arm64/boot/dts/qcom/pm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8550.dtsi
@@ -6,26 +6,24 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
-/ {
- thermal-zones {
- pm8550-thermal {
- polling-delay-passive = <100>;
- polling-delay = <0>;
+&thermal_zones {
+ pm8550-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;
- thermal-sensors = <&pm8550_temp_alarm>;
+ thermal-sensors = <&pm8550_temp_alarm>;
- trips {
- trip0 {
- temperature = <95000>;
- hysteresis = <0>;
- type = "passive";
- };
+ trips {
+ trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
- trip1 {
- temperature = <115000>;
- hysteresis = <0>;
- type = "hot";
- };
+ trip1 {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "hot";
};
};
};
diff --git a/arch/arm64/boot/dts/qcom/pm8550b.dtsi b/arch/arm64/boot/dts/qcom/pm8550b.dtsi
index 72609f31c890..b3cfa030679a 100644
--- a/arch/arm64/boot/dts/qcom/pm8550b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8550b.dtsi
@@ -6,26 +6,24 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
-/ {
- thermal-zones {
- pm8550b-thermal {
- polling-delay-passive = <100>;
- polling-delay = <0>;
-
- thermal-sensors = <&pm8550b_temp_alarm>;
-
- trips {
- trip0 {
- temperature = <95000>;
- hysteresis = <0>;
- type = "passive";
- };
+&thermal_zones {
+ pm8550b-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&pm8550b_temp_alarm>;
+
+ trips {
+ trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
- trip1 {
- temperature = <115000>;
- hysteresis = <0>;
- type = "hot";
- };
+ trip1 {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "hot";
};
};
};
diff --git a/arch/arm64/boot/dts/qcom/pm8550ve.dtsi b/arch/arm64/boot/dts/qcom/pm8550ve.dtsi
index 4dc1f03ab2c7..8ef57a51b5cd 100644
--- a/arch/arm64/boot/dts/qcom/pm8550ve.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8550ve.dtsi
@@ -6,26 +6,24 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
-/ {
- thermal-zones {
- pm8550ve-thermal {
- polling-delay-passive = <100>;
- polling-delay = <0>;
-
- thermal-sensors = <&pm8550ve_temp_alarm>;
-
- trips {
- trip0 {
- temperature = <95000>;
- hysteresis = <0>;
- type = "passive";
- };
-
- trip1 {
- temperature = <115000>;
- hysteresis = <0>;
- type = "hot";
- };
+&thermal_zones {
+ pm8550ve-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&pm8550ve_temp_alarm>;
+
+ trips {
+ trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
+
+ trip1 {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "hot";
};
};
};
diff --git a/arch/arm64/boot/dts/qcom/pm8550vs.dtsi b/arch/arm64/boot/dts/qcom/pm8550vs.dtsi
index 97b1c18aa7d8..258526abcc21 100644
--- a/arch/arm64/boot/dts/qcom/pm8550vs.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8550vs.dtsi
@@ -6,89 +6,87 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
-/ {
- thermal-zones {
- pm8550vs-c-thermal {
- polling-delay-passive = <100>;
- polling-delay = <0>;
-
- thermal-sensors = <&pm8550vs_c_temp_alarm>;
-
- trips {
- trip0 {
- temperature = <95000>;
- hysteresis = <0>;
- type = "passive";
- };
-
- trip1 {
- temperature = <115000>;
- hysteresis = <0>;
- type = "hot";
- };
+&thermal_zones {
+ pm8550vs-c-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&pm8550vs_c_temp_alarm>;
+
+ trips {
+ trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
+
+ trip1 {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "hot";
};
};
+ };
- pm8550vs-d-thermal {
- polling-delay-passive = <100>;
- polling-delay = <0>;
+ pm8550vs-d-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;
- thermal-sensors = <&pm8550vs_d_temp_alarm>;
+ thermal-sensors = <&pm8550vs_d_temp_alarm>;
- trips {
- trip0 {
- temperature = <95000>;
- hysteresis = <0>;
- type = "passive";
- };
+ trips {
+ trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
- trip1 {
- temperature = <115000>;
- hysteresis = <0>;
- type = "hot";
- };
+ trip1 {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "hot";
};
};
+ };
- pm8550vs-e-thermal {
- polling-delay-passive = <100>;
- polling-delay = <0>;
+ pm8550vs-e-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;
- thermal-sensors = <&pm8550vs_e_temp_alarm>;
+ thermal-sensors = <&pm8550vs_e_temp_alarm>;
- trips {
- trip0 {
- temperature = <95000>;
- hysteresis = <0>;
- type = "passive";
- };
+ trips {
+ trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
- trip1 {
- temperature = <115000>;
- hysteresis = <0>;
- type = "hot";
- };
+ trip1 {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "hot";
};
};
+ };
- pm8550vs-g-thermal {
- polling-delay-passive = <100>;
- polling-delay = <0>;
+ pm8550vs-g-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;
- thermal-sensors = <&pm8550vs_g_temp_alarm>;
+ thermal-sensors = <&pm8550vs_g_temp_alarm>;
- trips {
- trip0 {
- temperature = <95000>;
- hysteresis = <0>;
- type = "passive";
- };
+ trips {
+ trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
- trip1 {
- temperature = <115000>;
- hysteresis = <0>;
- type = "hot";
- };
+ trip1 {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "hot";
};
};
};
diff --git a/arch/arm64/boot/dts/qcom/pmr735d_a.dtsi b/arch/arm64/boot/dts/qcom/pmr735d_a.dtsi
index 37daaefe3431..251a16424d84 100644
--- a/arch/arm64/boot/dts/qcom/pmr735d_a.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmr735d_a.dtsi
@@ -6,26 +6,24 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
-/ {
- thermal-zones {
- pmr735d-k-thermal {
- polling-delay-passive = <100>;
- polling-delay = <0>;
-
- thermal-sensors = <&pmr735d_k_temp_alarm>;
-
- trips {
- trip0 {
- temperature = <95000>;
- hysteresis = <0>;
- type = "passive";
- };
-
- trip1 {
- temperature = <115000>;
- hysteresis = <0>;
- type = "hot";
- };
+&thermal_zones {
+ pmr735d-k-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&pmr735d_k_temp_alarm>;
+
+ trips {
+ trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
+
+ trip1 {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "hot";
};
};
};
diff --git a/arch/arm64/boot/dts/qcom/pmr735d_b.dtsi b/arch/arm64/boot/dts/qcom/pmr735d_b.dtsi
index 3b470f6ac46f..dbcfeb53d8ec 100644
--- a/arch/arm64/boot/dts/qcom/pmr735d_b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmr735d_b.dtsi
@@ -6,26 +6,24 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
-/ {
- thermal-zones {
- pmr735d-l-thermal {
- polling-delay-passive = <100>;
- polling-delay = <0>;
-
- thermal-sensors = <&pmr735d_l_temp_alarm>;
-
- trips {
- trip0 {
- temperature = <95000>;
- hysteresis = <0>;
- type = "passive";
- };
-
- trip1 {
- temperature = <115000>;
- hysteresis = <0>;
- type = "hot";
- };
+&thermal_zones {
+ pmr735d-l-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&pmr735d_l_temp_alarm>;
+
+ trips {
+ trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
+
+ trip1 {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "hot";
};
};
};
diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index ee1ba5a8c8fc..c68e08747b6f 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -4452,7 +4452,7 @@ compute-cb@8 {
};
};
- thermal-zones {
+ thermal_zones: thermal-zones {
aoss0-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi
index 2df77123a8c7..32198bf3cf7c 100644
--- a/arch/arm64/boot/dts/qcom/sm8650.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi
@@ -5030,7 +5030,7 @@ compute-cb@8 {
};
};
- thermal-zones {
+ thermal_zones: thermal-zones {
aoss0-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
--
2.34.1
next prev parent reply other threads:[~2024-05-21 18:40 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-21 18:37 [PATCH RFC v3 0/9] dt-bindings: hwinfo: Introduce board-id Elliot Berman
2024-05-21 18:37 ` [PATCH RFC v3 1/9] libfdt: board-id: Implement board-id scoring Elliot Berman
2024-05-21 19:28 ` Conor Dooley
2024-05-22 23:57 ` Elliot Berman
2024-05-21 18:37 ` [PATCH RFC v3 2/9] dt-bindings: board: Introduce board-id Elliot Berman
2024-05-21 19:19 ` Rob Herring (Arm)
2024-05-21 19:21 ` Conor Dooley
2024-05-21 19:25 ` Conor Dooley
2024-05-21 21:32 ` Rob Herring
2024-05-21 21:47 ` Conor Dooley
2024-05-22 23:47 ` Elliot Berman
2024-05-22 23:54 ` Elliot Berman
2024-05-23 1:23 ` Rob Herring (Arm)
2024-05-25 16:54 ` Conor Dooley
2024-05-29 15:43 ` Elliot Berman
2024-05-21 18:38 ` [PATCH RFC v3 3/9] fdt-select-board: Add test tool for selecting dtbs based on board-id Elliot Berman
2024-05-21 18:38 ` [PATCH RFC v3 4/9] dt-bindings: arm: qcom: Update Devicetree identifiers Elliot Berman
2024-05-25 17:21 ` Conor Dooley
2024-05-29 15:34 ` Elliot Berman
2024-05-21 18:38 ` [PATCH RFC v3 5/9] dt-bindings: board: Document board-ids for Qualcomm devices Elliot Berman
2024-05-21 19:19 ` Rob Herring (Arm)
2024-05-25 17:08 ` Conor Dooley
2024-05-29 15:09 ` Elliot Berman
2024-05-21 18:38 ` [PATCH RFC v3 6/9] arm64: boot: dts: sm8650: Add board-id Elliot Berman
2024-06-05 8:18 ` Krzysztof Kozlowski
2024-05-21 18:38 ` Elliot Berman [this message]
2024-05-21 18:38 ` [PATCH RFC v3 8/9] arm64: boot: dts: qcom: sm8550: Split into overlays Elliot Berman
2024-06-05 8:20 ` Krzysztof Kozlowski
2024-05-21 18:38 ` [PATCH RFC v3 9/9] tools: board-id: Add test suite Elliot Berman
2024-05-21 19:00 ` [PATCH RFC v3 0/9] dt-bindings: hwinfo: Introduce board-id Dmitry Baryshkov
2024-05-24 15:51 ` Konrad Dybcio
2024-05-27 7:19 ` Michal Simek
2024-05-29 15:32 ` Elliot Berman
2024-05-30 14:12 ` Michal Simek
2024-06-05 13:17 ` Simon Glass
2024-06-05 17:17 ` Elliot Berman
2024-06-06 16:00 ` Simon Glass
2024-06-21 22:40 ` Elliot Berman
2024-06-22 7:18 ` Dmitry Baryshkov
2024-06-28 7:33 ` Simon Glass
2024-06-28 8:04 ` Simon Glass
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240521-board-ids-v3-7-e6c71d05f4d2@quicinc.com \
--to=quic_eberman@quicinc.com \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=boot-architecture@lists.linaro.org \
--cc=caleb.connolly@linaro.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=frowand.list@gmail.com \
--cc=j-humphreys@ti.com \
--cc=jonathanh@nvidia.org \
--cc=jwerner@chromium.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michal.simek@amd.com \
--cc=peter.griffin@linaro.org \
--cc=quic_amrianan@quicinc.com \
--cc=robh+dt@kernel.org \
--cc=sjg@chromium.org \
--cc=sumit.garg@linaro.org \
--cc=wenst@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).