From: Kelvin Zhang via B4 Relay <devnull+kelvin.zhang.amlogic.com@kernel.org>
To: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
"Neil Armstrong" <neil.armstrong@linaro.org>,
"Kevin Hilman" <khilman@baylibre.com>,
"Jerome Brunet" <jbrunet@baylibre.com>,
"Martin Blumenstingl" <martin.blumenstingl@googlemail.com>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>
Cc: linux-pwm@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org,
Kelvin Zhang <kelvin.zhang@amlogic.com>,
Junyi Zhao <junyi.zhao@amlogic.com>
Subject: [PATCH v6 2/2] arm64: dts: amlogic: Add Amlogic S4 PWM
Date: Wed, 29 May 2024 18:00:57 +0800 [thread overview]
Message-ID: <20240529-s4-pwm-v6-2-270f63049f20@amlogic.com> (raw)
In-Reply-To: <20240529-s4-pwm-v6-0-270f63049f20@amlogic.com>
From: Junyi Zhao <junyi.zhao@amlogic.com>
Add device nodes for PWM_AB, PWM_CD, PWM_EF, PWM_GH and PWM_IJ
along with GPIO PIN configs of each channel.
Signed-off-by: Junyi Zhao <junyi.zhao@amlogic.com>
Signed-off-by: Kelvin Zhang <kelvin.zhang@amlogic.com>
---
arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 207 ++++++++++++++++++++++++++++++
1 file changed, 207 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
index 10896f9df682..98f554577bae 100644
--- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
@@ -312,6 +312,168 @@ mux {
};
};
+ pwm_a_pins1: pwm-a-pins1 {
+ mux {
+ groups = "pwm_a_d";
+ function = "pwm_a";
+ };
+ };
+
+ pwm_a_pins2: pwm-a-pins2 {
+ mux {
+ groups = "pwm_a_x";
+ function = "pwm_a";
+ };
+ };
+
+ pwm_a_pins: pwm-a-pins {
+ mux {
+ groups = "pwm_a_d";
+ function = "pwm_a";
+ };
+ };
+
+ pwm_b_pins1: pwm-b-pins1 {
+ mux {
+ groups = "pwm_b_d";
+ function = "pwm_b";
+ };
+ };
+
+ pwm_b_pins2: pwm-b-pins2 {
+ mux {
+ groups = "pwm_b_x";
+ function = "pwm_b";
+ };
+ };
+
+ pwm_c_pins1: pwm-c-pins1 {
+ mux {
+ groups = "pwm_c_d";
+ function = "pwm_c";
+ };
+ };
+
+ pwm_c_pins2: pwm-c-pins2 {
+ mux {
+ groups = "pwm_c_x";
+ function = "pwm_c";
+ };
+ };
+
+ pwm_d_pins1: pwm-d-pins1 {
+ mux {
+ groups = "pwm_d_d";
+ function = "pwm_d";
+ };
+ };
+
+ pwm_d_pins2: pwm-d-pins2 {
+ mux {
+ groups = "pwm_d_h";
+ function = "pwm_d";
+ };
+ };
+
+ pwm_e_pins1: pwm-e-pins1 {
+ mux {
+ groups = "pwm_e_x";
+ function = "pwm_e";
+ drive-strength-microamp = <500>;
+ };
+ };
+
+ pwm_e_pins2: pwm-e-pins2 {
+ mux {
+ groups = "pwm_e_z";
+ function = "pwm_e";
+ };
+ };
+
+ pwm_f_pins1: pwm-f-pins1 {
+ mux {
+ groups = "pwm_f_x";
+ function = "pwm_f";
+ };
+ };
+
+ pwm_f_pins2: pwm-f-pins2 {
+ mux {
+ groups = "pwm_f_z";
+ function = "pwm_f";
+ };
+ };
+
+ pwm_g_pins1: pwm-g-pins1 {
+ mux {
+ groups = "pwm_g_d";
+ function = "pwm_g";
+ };
+ };
+
+ pwm_g_pins2: pwm-g-pins2 {
+ mux {
+ groups = "pwm_g_z";
+ function = "pwm_g";
+ };
+ };
+
+ pwm_h_pins: pwm-h-pins {
+ mux {
+ groups = "pwm_h";
+ function = "pwm_h";
+ };
+ };
+
+ pwm_i_pins1: pwm-i-pins1 {
+ mux {
+ groups = "pwm_i_d";
+ function = "pwm_i";
+ };
+ };
+
+ pwm_i_pins2: pwm-i-pins2 {
+ mux {
+ groups = "pwm_i_h";
+ function = "pwm_i";
+ };
+ };
+
+ pwm_j_pins: pwm-j-pins {
+ mux {
+ groups = "pwm_j";
+ function = "pwm_j";
+ };
+ };
+
+ pwm_a_hiz_pins: pwm-a-hiz-pins {
+ mux {
+ groups = "pwm_a_hiz";
+ function = "pwm_a_hiz";
+ };
+ };
+
+ pwm_b_hiz_pins: pwm-b-hiz-pins {
+ mux {
+ groups = "pwm_b_hiz";
+ function = "pwm_b_hiz";
+ };
+ };
+
+ pwm_c_hiz_pins: pwm-c-hiz-pins {
+ mux {
+ groups = "pwm_c_hiz";
+ function = "pwm_b_hiz";
+ };
+ };
+
+ pwm_g_hiz_pins: pwm-g-hiz-pins {
+ mux {
+ groups = "pwm_g_hiz";
+ function = "pwm_g_hiz";
+ };
+ };
+
spicc0_pins_x: spicc0-pins_x {
mux {
groups = "spi_a_mosi_x",
@@ -399,6 +561,51 @@ spicc0: spi@50000 {
status = "disabled";
};
+ pwm_ab: pwm@58000 {
+ compatible = "amlogic,meson-s4-pwm";
+ reg = <0x0 0x58000 0x0 0x24>;
+ clocks = <&clkc_periphs CLKID_PWM_A>,
+ <&clkc_periphs CLKID_PWM_B>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm_cd: pwm@5a000 {
+ compatible = "amlogic,meson-s4-pwm";
+ reg = <0x0 0x5a000 0x0 0x24>;
+ clocks = <&clkc_periphs CLKID_PWM_C>,
+ <&clkc_periphs CLKID_PWM_D>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm_ef: pwm@5c000 {
+ compatible = "amlogic,meson-s4-pwm";
+ reg = <0x0 0x5c000 0x0 0x24>;
+ clocks = <&clkc_periphs CLKID_PWM_E>,
+ <&clkc_periphs CLKID_PWM_F>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm_gh: pwm@5e000 {
+ compatible = "amlogic,meson-s4-pwm";
+ reg = <0x0 0x5e000 0x0 0x24>;
+ clocks = <&clkc_periphs CLKID_PWM_G>,
+ <&clkc_periphs CLKID_PWM_H>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm_ij: pwm@60000 {
+ compatible = "amlogic,meson-s4-pwm";
+ reg = <0x0 0x60000 0x0 0x24>;
+ clocks = <&clkc_periphs CLKID_PWM_I>,
+ <&clkc_periphs CLKID_PWM_J>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
i2c0: i2c@66000 {
compatible = "amlogic,meson-axg-i2c";
reg = <0x0 0x66000 0x0 0x20>;
--
2.37.1
next prev parent reply other threads:[~2024-05-29 10:01 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-29 10:00 [PATCH v6 0/2] Add support for Amlogic S4 PWM Kelvin Zhang via B4 Relay
2024-05-29 10:00 ` [PATCH v6 1/2] pwm: meson: " Kelvin Zhang via B4 Relay
2024-05-30 12:33 ` [DMARC error][DKIM error] " George Stark
2024-05-29 10:00 ` Kelvin Zhang via B4 Relay [this message]
2024-05-30 11:50 ` [DMARC error][DKIM error] [PATCH v6 2/2] arm64: dts: amlogic: Add " George Stark
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240529-s4-pwm-v6-2-270f63049f20@amlogic.com \
--to=devnull+kelvin.zhang.amlogic.com@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jbrunet@baylibre.com \
--cc=junyi.zhao@amlogic.com \
--cc=kelvin.zhang@amlogic.com \
--cc=khilman@baylibre.com \
--cc=krzk+dt@kernel.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=neil.armstrong@linaro.org \
--cc=robh@kernel.org \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).