From: Ryan Walklin <ryan@testtoast.com>
To: dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org
Cc: Neil Armstrong <neil.armstrong@linaro.org>,
Jessica Zhang <quic_jesszhan@quicinc.com>,
Sam Ravnborg <sam@ravnborg.org>, David Airlie <airlied@gmail.com>,
Daniel Vetter <daniel@ffwll.ch>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>,
Thomas Zimmermann <tzimmermann@suse.de>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Hironori KIKUCHI <kikuchan98@gmail.com>,
Chris Morgan <macroalpha82@gmail.com>,
Andre Przywara <andre.przywara@arm.com>,
John Watts <contact@jookia.org>,
Ryan Walklin <ryan@testtoast.com>,
Conor Dooley <conor.dooley@microchip.com>
Subject: [PATCH v3 1/2] dt-bindings: display: panel: Add WL-355608-A8 panel
Date: Fri, 31 May 2024 09:12:14 +1200 [thread overview]
Message-ID: <20240530211415.44201-3-ryan@testtoast.com> (raw)
In-Reply-To: <20240530211415.44201-1-ryan@testtoast.com>
The WL-355608-A8 is a 3.5" 640x480@60Hz RGB LCD display used in a
number of handheld gaming devices made by Anbernic. By consensus a
vendor prefix is not provided as the panel OEM is unknown.
Add a device tree binding for the panel.
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
---
Changelog v1..v2:
- Correct compatible string and filename
- Note #dri-devel discussion regarding vendor prefix
- Remove unnecessary node names, spi-gpio compatible string and GPIOs from example
Changelog v2..v3:
- Remove errant tab and un-needed spi node label from example
- Add Reviewed-by tag
---
.../bindings/display/panel/wl-355608-a8.yaml | 60 +++++++++++++++++++
1 file changed, 60 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/wl-355608-a8.yaml
diff --git a/Documentation/devicetree/bindings/display/panel/wl-355608-a8.yaml b/Documentation/devicetree/bindings/display/panel/wl-355608-a8.yaml
new file mode 100644
index 0000000000..e552d01b52
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/wl-355608-a8.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/wl-355608-a8.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: WL-355608-A8 3.5" (640x480 pixels) 24-bit IPS LCD panel
+
+maintainers:
+ - Ryan Walklin <ryan@testtoast.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ const: wl-355608-a8
+
+ reg:
+ maxItems: 1
+
+ spi-3wire: true
+
+required:
+ - compatible
+ - reg
+ - port
+ - power-supply
+ - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "wl-355608-a8";
+ reg = <0>;
+
+ spi-3wire;
+ spi-max-frequency = <3125000>;
+
+ reset-gpios = <&pio 8 14 GPIO_ACTIVE_LOW>; // PI14
+
+ backlight = <&backlight>;
+ power-supply = <®_lcd>;
+
+ port {
+ endpoint {
+ remote-endpoint = <&tcon_lcd0_out_lcd>;
+ };
+ };
+ };
+ };
--
2.45.1
next prev parent reply other threads:[~2024-05-30 21:15 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-30 21:12 [PATCH v3 0/2] Add WL-355608-A8 panel Ryan Walklin
2024-05-30 21:12 ` Ryan Walklin [this message]
2024-06-06 9:32 ` [PATCH v3 1/2] dt-bindings: display: panel: " Maxime Ripard
2024-06-06 9:37 ` Neil Armstrong
2024-06-06 9:48 ` Ryan Walklin
2024-06-06 11:24 ` Maxime Ripard
2024-06-06 11:23 ` Maxime Ripard
2024-06-06 11:51 ` Conor Dooley
2024-06-18 9:04 ` Maxime Ripard
2024-06-18 11:13 ` Conor Dooley
2024-06-18 12:05 ` Neil Armstrong
2024-06-26 8:56 ` Maxime Ripard
2024-06-26 9:10 ` Ryan Walklin
2024-06-26 9:16 ` Neil Armstrong
2024-06-26 11:00 ` Ryan Walklin
2024-06-06 13:49 ` Neil Armstrong
2024-05-30 21:12 ` [PATCH v3 2/2] drm: panel: nv3052c: " Ryan Walklin
2024-06-03 8:39 ` Neil Armstrong
2024-06-03 8:46 ` [PATCH v3 0/2] " Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240530211415.44201-3-ryan@testtoast.com \
--to=ryan@testtoast.com \
--cc=airlied@gmail.com \
--cc=andre.przywara@arm.com \
--cc=conor+dt@kernel.org \
--cc=conor.dooley@microchip.com \
--cc=contact@jookia.org \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=kikuchan98@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=macroalpha82@gmail.com \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=quic_jesszhan@quicinc.com \
--cc=robh@kernel.org \
--cc=sam@ravnborg.org \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).