[PATCH 5/5] arm64: dts: allwinner: h616: add IOMMU node

[Andre Przywara <andre.przywara@arm.com>]

The Allwinner H616 contains a scatter-gather IOMMU connected to some
video related devices. It's almost compatible to the one used in the H6,
though with minor incompatibilities.

Add the DT node describing its resources, so that devices like the video
or display engine can connect to it.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
 arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
index 9c1980e24cb21..44f04619a43ac 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
@@ -320,6 +320,15 @@ x32clk_fanout_pin: x32clk-fanout-pin {
 			};
 		};
 
+		iommu: iommu@30f0000 {
+			compatible = "allwinner,sun50i-h616-iommu";
+			reg = <0x030f0000 0x10000>;
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_IOMMU>;
+			resets = <&ccu RST_BUS_IOMMU>;
+			#iommu-cells = <1>;
+		};
+
 		gic: interrupt-controller@3021000 {
 			compatible = "arm,gic-400";
 			reg = <0x03021000 0x1000>,
-- 
2.35.8