[PATCH] dt-bindings: PCI: qcom: Fix register maps items and add 3.3V supply

[PATCH] dt-bindings: PCI: qcom: Fix register maps items and add 3.3V supply

[Abel Vesa]

All PCIe controllers found on X1E80100 have MHI register region and
VDDPE supplies. Add them to the schema as well.

Fixes: 692eadd51698 ("dt-bindings: PCI: qcom: Document the X1E80100 PCIe Controller")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
This patchset fixes the following warning:
https://lore.kernel.org/all/171751454535.785265.18156799252281879515.robh@kernel.org/

Also fixes a MHI reg region warning that will be triggered by the following patch:
https://lore.kernel.org/all/20240604-x1e80100-dts-fixes-pcie6a-v2-1-0b4d8c6256e5@linaro.org/
---
 Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml
index 1074310a8e7a..7ceba32c4cf9 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml
@@ -19,11 +19,10 @@ properties:
     const: qcom,pcie-x1e80100
 
   reg:
-    minItems: 5
+    minItems: 6
     maxItems: 6
 
   reg-names:
-    minItems: 5
     items:
       - const: parf # Qualcomm specific registers
       - const: dbi # DesignWare PCIe registers
@@ -71,6 +70,9 @@ properties:
       - const: pci # PCIe core reset
       - const: link_down # PCIe link down reset
 
+  vddpe-3v3-supply:
+    description: A phandle to the PCIe endpoint power supply
+
 allOf:
   - $ref: qcom,pcie-common.yaml#
 

---
base-commit: d97496ca23a2d4ee80b7302849404859d9058bcd
change-id: 20240604-x1e80100-pci-bindings-fix-196925d15260

Best regards,
-- 
Abel Vesa <abel.vesa@linaro.org>

Re: [PATCH] dt-bindings: PCI: qcom: Fix register maps items and add 3.3V supply

[Krzysztof Kozlowski]

On 04/06/2024 18:05, Abel Vesa wrote:
> All PCIe controllers found on X1E80100 have MHI register region and
> VDDPE supplies. Add them to the schema as well.
> 
> Fixes: 692eadd51698 ("dt-bindings: PCI: qcom: Document the X1E80100 PCIe Controller")
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

Re: [PATCH] dt-bindings: PCI: qcom: Fix register maps items and add 3.3V supply

[Abel Vesa]

On 24-06-04 19:05:12, Abel Vesa wrote:
> All PCIe controllers found on X1E80100 have MHI register region and
> VDDPE supplies. Add them to the schema as well.
> 
> Fixes: 692eadd51698 ("dt-bindings: PCI: qcom: Document the X1E80100 PCIe Controller")
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---
> This patchset fixes the following warning:
> https://lore.kernel.org/all/171751454535.785265.18156799252281879515.robh@kernel.org/
> 
> Also fixes a MHI reg region warning that will be triggered by the following patch:

Correction here. This schema patch will trigger an MHI reg region
warning until the following patch will also be merged.

> https://lore.kernel.org/all/20240604-x1e80100-dts-fixes-pcie6a-v2-1-0b4d8c6256e5@linaro.org/
> ---
>  Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml
> index 1074310a8e7a..7ceba32c4cf9 100644
> --- a/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml
> +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml
> @@ -19,11 +19,10 @@ properties:
>      const: qcom,pcie-x1e80100
>  
>    reg:
> -    minItems: 5
> +    minItems: 6
>      maxItems: 6
>  
>    reg-names:
> -    minItems: 5
>      items:
>        - const: parf # Qualcomm specific registers
>        - const: dbi # DesignWare PCIe registers
> @@ -71,6 +70,9 @@ properties:
>        - const: pci # PCIe core reset
>        - const: link_down # PCIe link down reset
>  
> +  vddpe-3v3-supply:
> +    description: A phandle to the PCIe endpoint power supply
> +
>  allOf:
>    - $ref: qcom,pcie-common.yaml#
>  
> 
> ---
> base-commit: d97496ca23a2d4ee80b7302849404859d9058bcd
> change-id: 20240604-x1e80100-pci-bindings-fix-196925d15260
> 
> Best regards,
> -- 
> Abel Vesa <abel.vesa@linaro.org>
> 

Re: [PATCH] dt-bindings: PCI: qcom: Fix register maps items and add 3.3V supply

[Rob Herring]

On Tue, Jun 04, 2024 at 07:05:12PM +0300, Abel Vesa wrote:
> All PCIe controllers found on X1E80100 have MHI register region and
> VDDPE supplies. Add them to the schema as well.
> 
> Fixes: 692eadd51698 ("dt-bindings: PCI: qcom: Document the X1E80100 PCIe Controller")
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---
> This patchset fixes the following warning:
> https://lore.kernel.org/all/171751454535.785265.18156799252281879515.robh@kernel.org/
> 
> Also fixes a MHI reg region warning that will be triggered by the following patch:
> https://lore.kernel.org/all/20240604-x1e80100-dts-fixes-pcie6a-v2-1-0b4d8c6256e5@linaro.org/
> ---
>  Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml
> index 1074310a8e7a..7ceba32c4cf9 100644
> --- a/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml
> +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml
> @@ -19,11 +19,10 @@ properties:
>      const: qcom,pcie-x1e80100
>  
>    reg:
> -    minItems: 5
> +    minItems: 6
>      maxItems: 6
>  
>    reg-names:
> -    minItems: 5
>      items:
>        - const: parf # Qualcomm specific registers
>        - const: dbi # DesignWare PCIe registers
> @@ -71,6 +70,9 @@ properties:
>        - const: pci # PCIe core reset
>        - const: link_down # PCIe link down reset
>  
> +  vddpe-3v3-supply:
> +    description: A phandle to the PCIe endpoint power supply

TBC, this is a rail on the host side provided to a card? If so, we have 
standard properties for standard PCI voltage rails. It is also preferred 
that you put them in a root port node rather than the host bridge.

Rob

Re: [PATCH] dt-bindings: PCI: qcom: Fix register maps items and add 3.3V supply

[Manivannan Sadhasivam]

On Tue, Jun 04, 2024 at 05:58:06PM -0600, Rob Herring wrote:
> On Tue, Jun 04, 2024 at 07:05:12PM +0300, Abel Vesa wrote:
> > All PCIe controllers found on X1E80100 have MHI register region and
> > VDDPE supplies. Add them to the schema as well.
> > 
> > Fixes: 692eadd51698 ("dt-bindings: PCI: qcom: Document the X1E80100 PCIe Controller")
> > Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> > ---
> > This patchset fixes the following warning:
> > https://lore.kernel.org/all/171751454535.785265.18156799252281879515.robh@kernel.org/
> > 
> > Also fixes a MHI reg region warning that will be triggered by the following patch:
> > https://lore.kernel.org/all/20240604-x1e80100-dts-fixes-pcie6a-v2-1-0b4d8c6256e5@linaro.org/
> > ---
> >  Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml | 6 ++++--
> >  1 file changed, 4 insertions(+), 2 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml
> > index 1074310a8e7a..7ceba32c4cf9 100644
> > --- a/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml
> > +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml
> > @@ -19,11 +19,10 @@ properties:
> >      const: qcom,pcie-x1e80100
> >  
> >    reg:
> > -    minItems: 5
> > +    minItems: 6
> >      maxItems: 6
> >  
> >    reg-names:
> > -    minItems: 5
> >      items:
> >        - const: parf # Qualcomm specific registers
> >        - const: dbi # DesignWare PCIe registers
> > @@ -71,6 +70,9 @@ properties:
> >        - const: pci # PCIe core reset
> >        - const: link_down # PCIe link down reset
> >  
> > +  vddpe-3v3-supply:
> > +    description: A phandle to the PCIe endpoint power supply
> 
> TBC, this is a rail on the host side provided to a card? If so, we have 
> standard properties for standard PCI voltage rails.

There is a 'vpcie3v3-supply' property and it should satisfy the requirement. But
'vddpe-3v3-supply' is already used on multiple Qcom SoCs. So changing the name
in dts warrants the driver to support both supplies for backwards compatibility,
but that should be fine.

> It is also preferred that you put them in a root port node rather than the
> host bridge.

Even though the resource split between root port and host bridge is not clear in
Qcom SoCs, I think from logical stand point it makes sense.

- Mani

-- 
மணிவண்ணன் சதாசிவம்

Re: [PATCH] dt-bindings: PCI: qcom: Fix register maps items and add 3.3V supply

[Rob Herring]

On Wed, Jun 05, 2024 at 11:19:28AM +0530, Manivannan Sadhasivam wrote:
> On Tue, Jun 04, 2024 at 05:58:06PM -0600, Rob Herring wrote:
> > On Tue, Jun 04, 2024 at 07:05:12PM +0300, Abel Vesa wrote:
> > > All PCIe controllers found on X1E80100 have MHI register region and
> > > VDDPE supplies. Add them to the schema as well.
> > > 
> > > Fixes: 692eadd51698 ("dt-bindings: PCI: qcom: Document the X1E80100 PCIe Controller")
> > > Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> > > ---
> > > This patchset fixes the following warning:
> > > https://lore.kernel.org/all/171751454535.785265.18156799252281879515.robh@kernel.org/
> > > 
> > > Also fixes a MHI reg region warning that will be triggered by the following patch:
> > > https://lore.kernel.org/all/20240604-x1e80100-dts-fixes-pcie6a-v2-1-0b4d8c6256e5@linaro.org/
> > > ---
> > >  Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml | 6 ++++--
> > >  1 file changed, 4 insertions(+), 2 deletions(-)
> > > 
> > > diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml
> > > index 1074310a8e7a..7ceba32c4cf9 100644
> > > --- a/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml
> > > +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml
> > > @@ -19,11 +19,10 @@ properties:
> > >      const: qcom,pcie-x1e80100
> > >  
> > >    reg:
> > > -    minItems: 5
> > > +    minItems: 6
> > >      maxItems: 6
> > >  
> > >    reg-names:
> > > -    minItems: 5
> > >      items:
> > >        - const: parf # Qualcomm specific registers
> > >        - const: dbi # DesignWare PCIe registers
> > > @@ -71,6 +70,9 @@ properties:
> > >        - const: pci # PCIe core reset
> > >        - const: link_down # PCIe link down reset
> > >  
> > > +  vddpe-3v3-supply:
> > > +    description: A phandle to the PCIe endpoint power supply
> > 
> > TBC, this is a rail on the host side provided to a card? If so, we have 
> > standard properties for standard PCI voltage rails.
> 
> There is a 'vpcie3v3-supply' property and it should satisfy the requirement. But
> 'vddpe-3v3-supply' is already used on multiple Qcom SoCs. So changing the name
> in dts warrants the driver to support both supplies for backwards compatibility,
> but that should be fine.

Ideally, we would have a 'enable slot' or 'power on slot' function that 
turns on all the standard slot supplies and wiggles PERST# (and 
perhaps link state management) all following the timing defined in the 
PCI spec. Then the host drivers wouldn't have to do anything other than 
perhaps opt-in to use that.

> > It is also preferred that you put them in a root port node rather than the
> > host bridge.
> 
> Even though the resource split between root port and host bridge is not clear in
> Qcom SoCs, I think from logical stand point it makes sense.

Yeah, since it's typically 1:1 that's been blurred.

Rob

Re: [PATCH] dt-bindings: PCI: qcom: Fix register maps items and add 3.3V supply

[Manivannan Sadhasivam]

On Tue, Jun 04, 2024 at 07:05:12PM +0300, Abel Vesa wrote:

Nit: Subject should mention the SoC name

> All PCIe controllers found on X1E80100 have MHI register region and
> VDDPE supplies. Add them to the schema as well.
> 

This is actually 2 patches. One adding the MHI register region for X1E80100 and
another adding the missing 'vddpe-3v3-supply' common to other SoCs as well.

- Mani

> Fixes: 692eadd51698 ("dt-bindings: PCI: qcom: Document the X1E80100 PCIe Controller")
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---
> This patchset fixes the following warning:
> https://lore.kernel.org/all/171751454535.785265.18156799252281879515.robh@kernel.org/
> 
> Also fixes a MHI reg region warning that will be triggered by the following patch:
> https://lore.kernel.org/all/20240604-x1e80100-dts-fixes-pcie6a-v2-1-0b4d8c6256e5@linaro.org/
> ---
>  Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml
> index 1074310a8e7a..7ceba32c4cf9 100644
> --- a/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml
> +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml
> @@ -19,11 +19,10 @@ properties:
>      const: qcom,pcie-x1e80100
>  
>    reg:
> -    minItems: 5
> +    minItems: 6
>      maxItems: 6
>  
>    reg-names:
> -    minItems: 5
>      items:
>        - const: parf # Qualcomm specific registers
>        - const: dbi # DesignWare PCIe registers
> @@ -71,6 +70,9 @@ properties:
>        - const: pci # PCIe core reset
>        - const: link_down # PCIe link down reset
>  
> +  vddpe-3v3-supply:
> +    description: A phandle to the PCIe endpoint power supply
> +
>  allOf:
>    - $ref: qcom,pcie-common.yaml#
>  
> 
> ---
> base-commit: d97496ca23a2d4ee80b7302849404859d9058bcd
> change-id: 20240604-x1e80100-pci-bindings-fix-196925d15260
> 
> Best regards,
> -- 
> Abel Vesa <abel.vesa@linaro.org>
> 

-- 
மணிவண்ணன் சதாசிவம்