From: Chris Morgan <macroalpha82@gmail.com>
To: linux-sunxi@lists.linux.dev
Cc: devicetree@vger.kernel.org, mripard@kernel.org,
ryan@testtoast.com, andre.przywara@arm.com, samuel@sholland.org,
jernej.skrabec@gmail.com, wens@csie.org, conor+dt@kernel.org,
krzk+dt@kernel.org, robh@kernel.org,
Chris Morgan <macromorgan@hotmail.com>
Subject: [PATCH 2/2] arm64: dts: allwinner: h700: Add Anbernic RG35XX-SP
Date: Wed, 5 Jun 2024 13:53:39 -0500 [thread overview]
Message-ID: <20240605185339.266833-3-macroalpha82@gmail.com> (raw)
In-Reply-To: <20240605185339.266833-1-macroalpha82@gmail.com>
From: Chris Morgan <macromorgan@hotmail.com>
The Anbernic RG35XXSP is almost identical to the RG35XX-Plus, but in a
clamshell form-factor. The key differences between the SP and the Plus
is a lid switch and an RTC on the same i2c bus as the PMIC.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
arch/arm64/boot/dts/allwinner/Makefile | 3 +-
.../sun50i-h700-anbernic-rg35xx-sp.dts | 145 ++++++++++++++++++
2 files changed, 147 insertions(+), 1 deletion(-)
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-sp.dts
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index 0db7b60b49a1..00bed412ee31 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -49,5 +49,6 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-orangepi-zero2w.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-orangepi-zero3.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-transpeed-8k618-t.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-2024.dtb
-dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-plus.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-h.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-plus.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-sp.dtb
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-sp.dts b/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-sp.dts
new file mode 100644
index 000000000000..a1d16b65ef5d
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-sp.dts
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright (C) 2024 Ryan Walklin <ryan@testtoast.com>.
+ * Copyright (C) 2024 Chris Morgan <macroalpha82@gmail.com>.
+ */
+
+#include <dt-bindings/input/gpio-keys.h>
+#include "sun50i-h700-anbernic-rg35xx-plus.dts"
+
+/ {
+ model = "Anbernic RG35XX SP";
+ compatible = "anbernic,rg35xx-sp", "allwinner,sun50i-h700";
+
+ gpio-keys-lid {
+ compatible = "gpio-keys";
+
+ lid-switch {
+ label = "Lid Switch";
+ gpios = <&pio 4 7 GPIO_ACTIVE_LOW>; /* PE7 */
+ linux,can-disable;
+ linux,code = <SW_LID>;
+ linux,input-type = <EV_SW>;
+ wakeup-event-action = <EV_ACT_DEASSERTED>;
+ wakeup-source;
+ };
+ };
+};
+
+/delete-node/ &r_rsb;
+
+&r_i2c {
+ pinctrl-0 = <&r_i2c_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ axp717: pmic@34 {
+ compatible = "x-powers,axp717";
+ reg = <0x34>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+ vin1-supply = <®_vcc5v>;
+ vin2-supply = <®_vcc5v>;
+ vin3-supply = <®_vcc5v>;
+ vin4-supply = <®_vcc5v>;
+
+ regulators {
+ reg_dcdc1: dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-cpu";
+ };
+
+ reg_dcdc2: dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <940000>;
+ regulator-max-microvolt = <940000>;
+ regulator-name = "vdd-gpu-sys";
+ };
+
+ reg_dcdc3: dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-dram";
+ };
+
+ reg_aldo1: aldo1 {
+ /* 1.8v - unused */
+ };
+
+ reg_aldo2: aldo2 {
+ /* 1.8v - unused */
+ };
+
+ reg_aldo3: aldo3 {
+ /* 1.8v - unused */
+ };
+
+ reg_aldo4: aldo4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-pg";
+ };
+
+ reg_bldo1: bldo1 {
+ /* 1.8v - unused */
+ };
+
+ reg_bldo2: bldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-pll";
+ };
+
+ reg_bldo3: bldo3 {
+ /* 2.8v - unused */
+ };
+
+ reg_bldo4: bldo4 {
+ /* 1.2v - unused */
+ };
+
+ reg_cldo1: cldo1 {
+ /* 3.3v - audio codec - not yet implemented */
+ };
+
+ reg_cldo2: cldo2 {
+ /* 3.3v - unused */
+ };
+
+ reg_cldo3: cldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-io";
+ };
+
+ reg_cldo4: cldo4 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi";
+ };
+
+ reg_boost: boost {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5200000>;
+ regulator-name = "boost";
+ };
+
+ reg_cpusldo: cpusldo {
+ /* unused */
+ };
+ };
+ };
+
+ rtc_ext: rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
--
2.34.1
next prev parent reply other threads:[~2024-06-05 18:53 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-05 18:53 [PATCH 0/2] Add Anbernic RG35XX-SP Chris Morgan
2024-06-05 18:53 ` [PATCH 1/2] dt-bindings: arm: sunxi: Add Anbernic RG35XXSP Chris Morgan
2024-06-06 6:43 ` Krzysztof Kozlowski
2024-06-06 10:26 ` Andre Przywara
2024-06-06 11:30 ` Maxime Ripard
2024-06-06 16:55 ` Chris Morgan
2024-06-06 17:04 ` Chen-Yu Tsai
2024-06-05 18:53 ` Chris Morgan [this message]
2024-06-06 9:51 ` [PATCH 2/2] arm64: dts: allwinner: h700: Add Anbernic RG35XX-SP Andre Przywara
2024-06-06 11:58 ` Chen-Yu Tsai
2024-06-06 12:35 ` Andre Przywara
2024-06-06 17:06 ` Chris Morgan
2024-06-06 17:28 ` Andre Przywara
2024-06-06 15:56 ` [PATCH 0/2] " Rob Herring (Arm)
2024-06-06 16:52 ` Chris Morgan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240605185339.266833-3-macroalpha82@gmail.com \
--to=macroalpha82@gmail.com \
--cc=andre.przywara@arm.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jernej.skrabec@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=macromorgan@hotmail.com \
--cc=mripard@kernel.org \
--cc=robh@kernel.org \
--cc=ryan@testtoast.com \
--cc=samuel@sholland.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).