From: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Bjorn Andersson <andersson@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Marijn Suijten <marijn.suijten@somainline.org>,
Konrad Dybcio <konradybcio@kernel.org>,
linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Subject: [PATCH v4 4/5] arm64: dts: qcom: qcm2290: Add GPU nodes
Date: Thu, 06 Jun 2024 13:36:03 +0200 [thread overview]
Message-ID: <20240606-topic-rb1_gpu-v4-4-4bc0c19da4af@linaro.org> (raw)
In-Reply-To: <20240606-topic-rb1_gpu-v4-0-4bc0c19da4af@linaro.org>
Describe the GPU hardware on the QCM2290.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
arch/arm64/boot/dts/qcom/qcm2290.dtsi | 154 ++++++++++++++++++++++++++++++++++
1 file changed, 154 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
index 106110a9f551..99d98afb1b2c 100644
--- a/arch/arm64/boot/dts/qcom/qcm2290.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
@@ -7,6 +7,7 @@
#include <dt-bindings/clock/qcom,dispcc-qcm2290.h>
#include <dt-bindings/clock/qcom,gcc-qcm2290.h>
+#include <dt-bindings/clock/qcom,qcm2290-gpucc.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/firmware/qcom,scm.h>
@@ -758,6 +759,11 @@ qusb2_hstx_trim: hstx-trim@25b {
reg = <0x25b 0x1>;
bits = <1 4>;
};
+
+ gpu_speed_bin: gpu-speed-bin@2006 {
+ reg = <0x2006 0x2>;
+ bits = <5 8>;
+ };
};
pmu@1b8e300 {
@@ -1425,6 +1431,154 @@ usb_dwc3_ss: endpoint {
};
};
+ gpu: gpu@5900000 {
+ compatible = "qcom,adreno-07000200", "qcom,adreno";
+ reg = <0x0 0x05900000 0x0 0x40000>;
+ reg-names = "kgsl_3d0_reg_memory";
+
+ interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gpucc GPU_CC_GX_GFX3D_CLK>,
+ <&gpucc GPU_CC_AHB_CLK>,
+ <&gcc GCC_BIMC_GPU_AXI_CLK>,
+ <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+ <&gpucc GPU_CC_CX_GMU_CLK>,
+ <&gpucc GPU_CC_CXO_CLK>;
+ clock-names = "core",
+ "iface",
+ "mem_iface",
+ "alt_mem_iface",
+ "gmu",
+ "xo";
+
+ interconnects = <&bimc MASTER_GFX3D RPM_ALWAYS_TAG
+ &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+ interconnect-names = "gfx-mem";
+
+ iommus = <&adreno_smmu 0 1>,
+ <&adreno_smmu 2 0>;
+ operating-points-v2 = <&gpu_opp_table>;
+ power-domains = <&rpmpd QCM2290_VDDCX>;
+ qcom,gmu = <&gmu_wrapper>;
+
+ nvmem-cells = <&gpu_speed_bin>;
+ nvmem-cell-names = "speed_bin";
+ #cooling-cells = <2>;
+
+ status = "disabled";
+
+ zap-shader {
+ memory-region = <&pil_gpu_mem>;
+ };
+
+ gpu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ /* TODO: Scale RPM_SMD_BIMC_GPU_CLK w/ turbo freqs */
+ opp-1123200000 {
+ opp-hz = /bits/ 64 <1123200000>;
+ required-opps = <&rpmpd_opp_turbo_plus>;
+ opp-peak-kBps = <6881000>;
+ opp-supported-hw = <0x3>;
+ turbo-mode;
+ };
+
+ opp-1017600000 {
+ opp-hz = /bits/ 64 <1017600000>;
+ required-opps = <&rpmpd_opp_turbo>;
+ opp-peak-kBps = <6881000>;
+ opp-supported-hw = <0x3>;
+ turbo-mode;
+ };
+
+ opp-921600000 {
+ opp-hz = /bits/ 64 <921600000>;
+ required-opps = <&rpmpd_opp_nom_plus>;
+ opp-peak-kBps = <6881000>;
+ opp-supported-hw = <0x3>;
+ };
+
+ opp-844800000 {
+ opp-hz = /bits/ 64 <844800000>;
+ required-opps = <&rpmpd_opp_nom>;
+ opp-peak-kBps = <6881000>;
+ opp-supported-hw = <0x7>;
+ };
+
+ opp-672000000 {
+ opp-hz = /bits/ 64 <672000000>;
+ required-opps = <&rpmpd_opp_svs_plus>;
+ opp-peak-kBps = <3879000>;
+ opp-supported-hw = <0xf>;
+ };
+
+ opp-537600000 {
+ opp-hz = /bits/ 64 <537600000>;
+ required-opps = <&rpmpd_opp_svs>;
+ opp-peak-kBps = <2929000>;
+ opp-supported-hw = <0xf>;
+ };
+
+ opp-355200000 {
+ opp-hz = /bits/ 64 <355200000>;
+ required-opps = <&rpmpd_opp_low_svs>;
+ opp-peak-kBps = <1720000>;
+ opp-supported-hw = <0xf>;
+ };
+ };
+ };
+
+ gmu_wrapper: gmu@596a000 {
+ compatible = "qcom,adreno-gmu-wrapper";
+ reg = <0x0 0x0596a000 0x0 0x30000>;
+ reg-names = "gmu";
+ power-domains = <&gpucc GPU_CX_GDSC>,
+ <&gpucc GPU_GX_GDSC>;
+ power-domain-names = "cx",
+ "gx";
+ };
+
+ gpucc: clock-controller@5990000 {
+ compatible = "qcom,qcm2290-gpucc";
+ reg = <0x0 0x05990000 0x0 0x9000>;
+ clocks = <&gcc GCC_GPU_CFG_AHB_CLK>,
+ <&rpmcc RPM_SMD_XO_CLK_SRC>,
+ <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+ <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+ power-domains = <&rpmpd QCM2290_VDDCX>;
+ required-opps = <&rpmpd_opp_low_svs>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+ adreno_smmu: iommu@59a0000 {
+ compatible = "qcom,qcm2290-smmu-500", "qcom,adreno-smmu",
+ "qcom,smmu-500", "arm,mmu-500";
+ reg = <0x0 0x059a0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+ <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
+ <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>;
+ clock-names = "mem",
+ "hlos",
+ "iface";
+
+ power-domains = <&gpucc GPU_CX_GDSC>;
+
+ #global-interrupts = <1>;
+ #iommu-cells = <2>;
+ };
+
mdss: display-subsystem@5e00000 {
compatible = "qcom,qcm2290-mdss";
reg = <0x0 0x05e00000 0x0 0x1000>;
--
2.45.2
next prev parent reply other threads:[~2024-06-06 11:36 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-06 11:35 [PATCH v4 0/5] A702 support Konrad Dybcio
2024-06-06 11:36 ` [PATCH v4 1/5] dt-bindings: clock: Add Qcom QCM2290 GPUCC Konrad Dybcio
2024-06-06 11:36 ` [PATCH v4 2/5] clk: qcom: clk-alpha-pll: Add HUAYRA_2290 support Konrad Dybcio
2024-06-06 11:36 ` [PATCH v4 3/5] clk: qcom: Add QCM2290 GPU clock controller driver Konrad Dybcio
2024-06-06 11:36 ` Konrad Dybcio [this message]
2024-06-06 11:36 ` [PATCH v4 5/5] arm64: dts: qcom: qrb2210-rb1: Enable the GPU Konrad Dybcio
2024-06-14 22:48 ` (subset) [PATCH v4 0/5] A702 support Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240606-topic-rb1_gpu-v4-4-4bc0c19da4af@linaro.org \
--to=konrad.dybcio@linaro.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marijn.suijten@somainline.org \
--cc=mturquette@baylibre.com \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).