From: Devarsh Thakkar <devarsht@ti.com>
To: <mchehab@kernel.org>, <robh@kernel.org>,
<krzysztof.kozlowski+dt@linaro.org>, <conor+dt@kernel.org>,
<hverkuil-cisco@xs4all.nl>, <linux-media@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<benjamin.gaignard@collabora.com>,
<sebastian.fricke@collabora.com>
Cc: <laurent.pinchart@ideasonboard.com>, <praneeth@ti.com>,
<nm@ti.com>, <vigneshr@ti.com>, <a-bhatia1@ti.com>,
<j-luthra@ti.com>, <b-brnich@ti.com>, <detheridge@ti.com>,
<p-mantena@ti.com>, <vijayp@ti.com>, <andrzej.p@collabora.com>,
<nicolas@ndufresne.ca>
Subject: [PATCH v13 01/13] media: dt-bindings: Add Imagination E5010 JPEG Encoder
Date: Fri, 7 Jun 2024 18:54:43 +0530 [thread overview]
Message-ID: <20240607132443.3544826-1-devarsht@ti.com> (raw)
In-Reply-To: <20240607131900.3535250-1-devarsht@ti.com>
Add dt-bindings for Imagination E5010 JPEG Encoder [1] which is implemented
as stateful V4L2 M2M driver.
The device supports baseline encoding with two different quantization
tables and compression ratio as demanded.
Minimum resolution supported is 64x64 and Maximum resolution supported is
8192x8192.
Link: https://www.ti.com/lit/pdf/spruj16 [1] (Section 7.6 JPEG Encoder)
Co-developed-by: David Huang <d-huang@ti.com>
Signed-off-by: David Huang <d-huang@ti.com>
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
V13: Update commit message to use Link: syntax
V6->V12: No change
V5:
- Add Reviewed-By tag
V4:
- Use ti-specific compatible ti,am62a-jpeg-enc as secondary one
- Update commit message and title
- Remove clock-names as only single clock
V3:
- Add vendor specific compatible
- Update reg names
- Update clocks to 1
- Fix dts example with proper naming
V2: No change
---
.../bindings/media/img,e5010-jpeg-enc.yaml | 75 +++++++++++++++++++
MAINTAINERS | 5 ++
2 files changed, 80 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yaml
diff --git a/Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yaml b/Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yaml
new file mode 100644
index 000000000000..085020cb9e61
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/img,e5010-jpeg-enc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Imagination E5010 JPEG Encoder
+
+maintainers:
+ - Devarsh Thakkar <devarsht@ti.com>
+
+description: |
+ The E5010 is a JPEG encoder from Imagination Technologies implemented on
+ TI's AM62A SoC. It is capable of real time encoding of YUV420 and YUV422
+ inputs to JPEG and M-JPEG. It supports baseline JPEG Encoding up to
+ 8Kx8K resolution.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: ti,am62a-jpeg-enc
+ - const: img,e5010-jpeg-enc
+ - const: img,e5010-jpeg-enc
+
+ reg:
+ items:
+ - description: The E5010 core register region
+ - description: The E5010 mmu register region
+
+ reg-names:
+ items:
+ - const: core
+ - const: mmu
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/soc/ti,sci_pm_domain.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ jpeg-encoder@fd20000 {
+ compatible = "img,e5010-jpeg-enc";
+ reg = <0x00 0xfd20000 0x00 0x100>,
+ <0x00 0xfd20200 0x00 0x200>;
+ reg-names = "core", "mmu";
+ clocks = <&k3_clks 201 0>;
+ power-domains = <&k3_pds 201 TI_SCI_PD_EXCLUSIVE>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index bb9f8077b37d..f2dcab7af2d1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10781,6 +10781,11 @@ S: Maintained
F: Documentation/devicetree/bindings/auxdisplay/img,ascii-lcd.yaml
F: drivers/auxdisplay/img-ascii-lcd.c
+IMGTEC JPEG ENCODER DRIVER
+M: Devarsh Thakkar <devarsht@ti.com>
+S: Supported
+F: Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yaml
+
IMGTEC IR DECODER DRIVER
S: Orphan
F: drivers/media/rc/img-ir/
--
2.39.1
next prev parent reply other threads:[~2024-06-07 13:25 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-07 13:19 [PATCH v13 00/13] Add V4L2 M2M Driver for E5010 JPEG Encoder Devarsh Thakkar
2024-06-07 13:24 ` Devarsh Thakkar [this message]
2024-06-07 13:28 ` [PATCH v13 02/13] media: imagination: Add E5010 JPEG Encoder driver Devarsh Thakkar
[not found] ` <20240607132831.3551333-1-devarsht@ti.com>
[not found] ` <59866428-342b-4ba4-a7c7-2df1477aa7e6@xs4all.nl>
[not found] ` <e948cea7-d5c7-a7e6-d921-ad7c2f93cd5a@ti.com>
[not found] ` <904289bb-96a0-4a0d-9046-96acd8843b98@xs4all.nl>
2024-06-20 7:22 ` [v13 03/13] media: v4l2-jpeg: Export reference quantization and huffman tables Markus Elfring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240607132443.3544826-1-devarsht@ti.com \
--to=devarsht@ti.com \
--cc=a-bhatia1@ti.com \
--cc=andrzej.p@collabora.com \
--cc=b-brnich@ti.com \
--cc=benjamin.gaignard@collabora.com \
--cc=conor+dt@kernel.org \
--cc=detheridge@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=hverkuil-cisco@xs4all.nl \
--cc=j-luthra@ti.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=nicolas@ndufresne.ca \
--cc=nm@ti.com \
--cc=p-mantena@ti.com \
--cc=praneeth@ti.com \
--cc=robh@kernel.org \
--cc=sebastian.fricke@collabora.com \
--cc=vigneshr@ti.com \
--cc=vijayp@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).